Honda CR-V (2022 year). Manual in english — page 8
125
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if the automatic brake hold is automatically
cancelled while it is in operation.
•
Immediately depress the brake pedal.
•
Appears when the automatic brake hold system is
turned off.
2
•
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
•
Fasten the driver’s seat belt.
2
Continuously variable
transmission models
Manual transmission
models
126
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
•
Press the automatic brake hold button with the brake
pedal depressed.
2
•
Appears when the parking brake is applied
automatically while it is in operation.
2
2
•
Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
•
Appears while driving
- Press the electric parking
brake switch with the brake pedal depressed.
2
Continuously variable
transmission models
Manual transmission
models
Continuously variable
transmission models
Manual transmission
models
127
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
*1:Models with the keyless access system have an
ENGINE START/STOP
button instead of an ignition switch.
*2:Models without third row seat
*3:Models with third row seat
Message
Condition
Explanation
•
Appears if the vehicle is being driven in a manner
consistent with drowsy or inattentive driving.
2
•
Appears when any of the second row and third row
*
seat belts are latched or unlatched, or either rear
door is opened and closed.
2
•
Appears when the vehicle speed reaches the set
speed. You can set two different speeds for the
alarm.
2
•
Appears when the starter system has a problem.
•
As a temporary measure, hold the ignition switch to
START
(
e
*1
for up to 15 seconds while pressing the
brake pedal and clutch pedal (manual transmission
only), and manually start the engine.
Have your vehicle checked by a dealer.
(White)
(Amber)
*2
*3
* Not available on all models
128
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when any of the service items is required in
less than 30 days.
•
The remaining days will be counted down per day.
2
•
Appears when any of the service items is required in
less than 10 days.
•
Have the indicated service performed as soon as
possible.
2
•
Appears when the indicated maintenance service is
still not done after the remaining time reaches 0.
•
Your vehicle has passed the service required point.
Immediately have the service performed and make sure
to reset the service reminder.
2
Models with service reminder system
* Not available on all models
129
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the scheduled maintenance is due
soon.
•
The engine oil, or the engine oil and oil filter should be
changed soon.
2
P. 665
•
Appears when the scheduled maintenance is due.
•
The engine oil, or the engine oil and oil filter should be
changed as soon as possible.
2
P. 665
•
Appears when the scheduled engine oil change is
passed due.
•
The engine oil, or the engine oil and oil filter should be
changed immediately.
2
P. 665
Message
Condition
Explanation
•
Appears when washer fluid gets low.
•
Refill washer fluid.
2
P. 690
Models with oil monitor system
Models with headlight washer
* Not available on all models
130
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when you open the driver’s door while the
ignition key is in ACCESSORY
(
q
.
•
Turn the ignition switch to LOCK
(
0
, then remove the
key.
•
Appears when you open the driver’s door while the
ignition key is in LOCK
(
0
.
•
Remove the key from the ignition switch.
•
Appears when the ignition key is turned to
ACCESSORY
(
q
from ON
(
w
. (The driver’s door is
closed.)
—
Message
Condition
Explanation
•
Appears when the ignition switch is turned to START
(
e
without depressing the clutch pedal.
•
Turn the ignition switch with depressing the clutch
pedal.
Models without keyless access system
Models without keyless access system with manual transmission
131
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears as soon as a problem is detected in the
keyless access system or keyless starting system.
•
Appears constantly
- Have your vehicle checked by a
dealer.
•
Appears when you close the door with the power
mode on without the keyless remote inside the
vehicle.
•
The message goes away when you bring the keyless
remote back inside the vehicle, and close the door.
2
P. 217
•
Appears when the keyless remote battery becomes
weak.
•
Replace the battery as soon as possible.
2
Models with keyless access system
132
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears after you set the power mode to
ACCESSORY or ON.
•
Appears after you unlock and open the driver’s door.
2
P. 513
•
Appears when the power mode is ACCESSORY.
—
•
Appears after the driver’s door is opened when the
power mode is ACCESSORY.
•
Press the
ENGINE START/STOP
button twice with your
foot off the brake pedal (automatic transmission) or the
clutch pedal (manual transmission) to change the
power mode to VEHICLE OFF (LOCK).
•
Appears if the keyless remote’s battery is too weak
to start the engine or the key is not within operating
range to start the engine. The beeper sounds six
times.
•
Bring the keyless remote in front of the
ENGINE
START/STOP
button to be touched with.
2
If the Keyless Remote Battery is Weak
Models with keyless access system
Continuously variable
transmission models
Manual transmission
models
Right-hand drive type
133
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the steering wheel is locked.
•
Move the steering wheel left and right while pressing
the
ENGINE START/STOP
button.
•
Appears if you push the
ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P
.
•
Move the shift lever to
(
P
, then press the
ENGINE
START/STOP
button twice.
•
Appears if you press the
ENGINE START/STOP
button while the vehicle is moving.
2
Models with keyless access system
Continuously variable
transmission models
(Amber)
134
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
*1:Models with the keyless access system have an
ENGINE START/STOP
button instead of an ignition switch.
Message
Condition
Explanation
•
Appears when the engine does not restart
automatically due to the following reasons:
-
The bonnet is open.
-
There is a problem in the system that disables Auto
Idle Stop.
•
Follow the normal procedure to start the engine.
2
P. 510, 513
•
Appears when you move the shift lever from
(
N
to
any other position without depressing the clutch
pedal while Auto Idle Stop is in operation.
•
The engine will not start even when the battery charge
becomes low. Shift to
(
N
to avoid the battery charge
becomes low.
2
P. 528
•
Appears in white when you turn the ignition switch
to START
(
e
*1
before fully depressing the clutch
pedal.
•
Depress the clutch pedal.
•
Appears in amber when the following conditions are
kept while Auto Idle Stop is in operation:
-
You are not wearing a seat belt.
-
The shift lever is in any position except
(
N
.
•
Depress the clutch pedal. Wear the seat belt
immediately, and continue to keep the shift lever in
(
N
next time Auto Idle Stop activates.
Models with auto idle stop
135
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when Auto Idle Stop does not activate for
some reason.
•
Appears when the engine restarts automatically.
•
Appears when the battery temperature is around
5°C or lower.
2
Auto Idle Stop Activates When:
P. 530
•
Appears when Auto Idle Stop does not activate
because the engine coolant temperature is low or
high.
2
Auto Idle Stop does not activate when:
P. 530
•
Appears when Auto Idle Stop does not activate
because the climate control system is in use, and the
difference between the set temperature and actual
interior temperature becomes significant.
2
Auto Idle Stop Activates When:
P. 530
•
Appears when the system is under the following
conditions while Auto Idle Stop activates:
-
The climate control system is in use, and the
difference between the set temperature and actual
interior temperature becomes significant.
-
The humidity in the interior is high.
•
The engine restarts automatically in a few seconds.
Models with auto idle stop
136
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when Auto Idle Stop does not activate
because the battery charge level is low.
•
Appears when the battery is low performance.
2
P. 528
•
Appears when the system is under the following
conditions while Auto Idle Stop activates:
-
The battery charge level is low.
•
The engine restarts automatically in a few seconds.
•
Appears when you turn the Auto Idle Stop system
on.
2
P. 528
•
Appears when the bonnet is opened.
•
Close the bonnet.
Models with auto idle stop
137
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if there is a problem with the auto high-
beam.
•
Manually operate the headlight switch.
•
If you are driving with the high beam headlights when
this happens, the headlights are changed to low beams.
•
Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
•
May appear when driving in bad weather (rain,
snow, fog, etc.)
•
When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth. The
message may take some time to go off.
•
Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2
2
P. 555
•
Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
•
Use the climate control system to cool down the
camera.
•
Disappears
- The camera has been cooled down and
the systems are activated normally.
2
2
P. 555
•
Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
•
May appear when driving in bad weather (rain,
snow, fog, etc.)
•
When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
•
Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2
2
P. 555
138
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the system predicts the vehicle
cutting in in front of you from the right and decrease
your vehicle speed according to the cut-in vehicle.
•
The system automatically keeps a safe distance from the
cut-in vehicle when the system predicts the cutting in.
2
P. 585, 600
•
Appears when the system predicts the vehicle
cutting in in front of you from the left and decrease
your vehicle speed according to the cut-in vehicle.
•
The system automatically keeps a safe distance from the
cut-in vehicle when the system predicts the cutting in.
2
P. 585, 600
•
Appears when ACC has been automatically
cancelled.
•
You can resume the set speed after the condition that
caused ACC to cancel improves. Press the
RES/+
button.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
P. 586
139
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
•
Appears when pressing the
–/SET
button while the
distance between your vehicle and the vehicle ahead
of you is too close.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
•
Appears when the driver’s seat belt is unfastened
while your vehicle is automatically stopped by ACC.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
•
Appears when pressing the
–/SET
button while the
driver’s seat belt is unfastened.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
Continuously variable
transmission models
(White)
140
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if the VSA or traction control function
operates while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
P. 586
•
Appears when pressing the
RES/+
or
–/SET
button
while the vehicle is moving and the brake pedal is
depressed.
•
ACC cannot be set.
2
P. 586
•
Appears when pressing the
RES/+
or
–/SET
button
while the vehicle is moving and the clutch pedal is
depressed.
•
ACC cannot be set.
2
P. 586
•
Appears when the clutch pedal is applied too long
while ACC is in operation.
•
ACC has been automatically cancelled.
2
P. 586
Manual transmission
models
Manual transmission
models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст