Honda e (2021 year). Manual in english — page 10
146
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when Lead Car Departure Notification
System is on.
2
Lead Car Departure Notification System
P. 484
(Amber)
•
Appears if the vehicle is about to veer out of the
detected lane.
•
Take direct control of the steering and keep the vehicle
in the centre of the lane. The message will disappear
after a while.
2
Lane Keeping Assist System (LKAS)
P. 467
2
Road Departure Mitigation System
(Red)
•
Appears if the driver is merely resting his or her
hands on the steering wheel or is not holding the
steering wheel at all and the vehicle is about to veer
out of the detected lane. A beeper will also sound.
•
Take direct control of the steering and keep the vehicle
in the centre of the lane. The message will disappear
after a while.
2
Lane Keeping Assist System (LKAS)
P. 467
•
Blinks if the driver is merely resting his or her hands
on the steering wheel or is not holding the steering
wheel at all. A beeper will also sound. If the driver
continues to drive in this manner, the beeper will
turn to a single long beep and LKAS will be
deactivated.
•
Take direct control of the steering; the message will
disappear.
2
Lane Keeping Assist System (LKAS)
P. 467
147
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
(White)
•
Appears when the vehicle is likely to drive out of a
detected lane.
The Road Departure Mitigation system also steers
the vehicle to help you remain within your driving
lane.
•
Take direct control of the steering and keep the vehicle
in the centre of the lane. The message will disappear
after a while.
2
Road Departure Mitigation System
•
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
•
If any other system indicators come on, such as the
VSA, ABS and brake system, take appropriate action.
2
•
Appears when the
SET/−
,
RES/+
,
CANCEL
, interval
or
LIM
button is pressed while ACC, adjustable
speed limiter or intelligent speed limiter is off.
●
After pressing the
button, press the
SET/−
,
RES/+
,
CANCEL
, interval or
LIM
button.
2
2
P. 410
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when the interval button is pressed in
adjustable speed limiter/intelligent speed limiter
mode.
•
After switching to ACC, press the interval button.
2
2
P. 410
2
148
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when Auto Power OFF is disabled.
2
•
Appears when the charging connector has failed.
•
Disconnect the charging connector using the release
cord.
2
If You Cannot Disengage the Charging Connector
P. 673
●
Appears when the charging connector is connected
to the inlet.
●
The vehicle does not move while the charging
connector is plugged into the inlet.
•
Appears after you set the power mode to VEHICLE
OFF without connecting the charging connector
while the ambient temperature is low.
•
Connecting the charging connector improves cold
startability.
(Amber)
(White)
149
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when charging is not available due to high
power consumption.
•
Turn up/down the air conditioning if you wish to charge
the High Voltage battery.
•
Appears when charging is not available due to high
power consumption.
•
Reduce the power consumption of AC outlet if you
wish to charge the High Voltage battery.
•
Appears when charging is not available due to high
power consumption.
•
Turn up/down the air conditioning or reduce the power
consumption of the AC outlet if you wish to charge the
High Voltage battery.
•
Appears when charging is not available due to high
power consumption.
•
Reduce the power consumption of the vehicle if you
wish to charge the High Voltage battery.
150
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the single pedal control system is
temporarily unable to be used.
•
Wait awhile, then turn on the single pedal control
system.
•
Appears when the single pedal control system
cannot be used because the Honda parking pilot is
activated.
•
Turn off the Honda parking pilot, then turn on the
single pedal control system.
•
Appears when the single pedal control button is
pressed while the driver's seat belt is unfastened.
•
Fasten the seat belt, then press the single pedal control
button.
•
Appears when the single pedal control button is
pressed without depressing the brake pedal.
•
Depress the brake pedal then press the single pedal
control button.
•
Appears when the single pedal control system
operation is automatically cancelled.
•
Wait awhile, then turn the single pedal control system
on.
•
Appears when the single pedal control system is
automatically turned off when ACC is set.
—
•
Appears when the single pedal control system is
automatically turned off when the Honda parking
pilot is activated.
—
151
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the automatic brake hold is changed
to single pedal control.
—
•
Appears when deceleration has decreased.
2
•
Appears when the automatic brake hold system
cannot be used because the single pedal control is
activated.
—
•
Appears when there is a problem with the digital key
system.
•
Have your vehicle checked by a dealer.
152
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the driver's door is opened when the
power mode is in ON.
•
Set the power mode to OFF and carry the key when
getting off the vehicle.
●
Appears before exiting the vehicle, if a rear door was
opened shortly before the vehicle was turned on, to
remind you to check for any passengers or items
present in the rear seats when you leave the vehicle.
●
Check the rear seat for passengers or items before
exiting the vehicle.
2
P. 230
Message
Condition
Explanation
●
Appears when there is a problem with the Honda
Parking Pilot System.
●
Have your vehicle checked by a dealer.
Models with Honda Parking Pilot
153
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when any of the service items is required in
less than 30 days.
•
The remaining days will be counted down per day.
2
•
Appears when any of the service items is required in
less than 10 days.
•
Have the indicated service performed as soon as
possible.
2
•
Appears when the indicated maintenance service is
still not done after the remaining time reaches 0.
•
Your vehicle has passed the service required point.
Immediately have the service performed and make sure
to reset the service reminder.
2
Models with service reminder system
* Not available on all models
154
In
strum
e
nt Pa
nel
Gauges and Displays
Gauges
Gauges include the speedometer, High Voltage battery charge level gauge,
POWER
/
CHARGE
gauge, and related indicators. They are displayed when the
power mode is in ON.
Displays your driving speed in km/h or mph.
Shows the remaining High Voltage battery charge level.
■
Electric motor
The degree to which the electric motor is being powered is displayed by the readings
on the
POWER
side.
■
Battery charge in progress
The degree to which the High Voltage battery is being charged is displayed by the
readings on the
CHARGE
side.
Shows the total number of kilometres or miles that your vehicle has accumulated.
■
Speedometer
■
High Voltage Battery Charge Level Gauge
■
POWER/CHARGE Gauge
■
Odometer
1
You can set the speedometer and the displayed
measurements to read in either km/h and mph.
2
P. 168
1
High Voltage Battery Charge Level Gauge
The High Voltage battery charge level may decrease
under the following conditions:
•
When the 12-volt battery has been replaced.
•
When the 12-volt battery has been disconnected.
•
When the High Voltage battery control system
corrects its reading.
The charge level reading will be corrected
automatically while driving.
Changes in the temperature of the High Voltage
battery can increase or decrease the battery’s
charging capacity. If temperature changes cause the
battery’s capacity to change, the number of
indicators in the battery charge level gauge may also
change, even if the amount of charging remains the
same.
155
uu
Gauges and Displays
u
Gauges
In
strum
e
nt Pa
nel
Shows the outside temperature in Celsius.
If the outside temperature has been below 3°C at the time you set the power mode
to ON, the outside temperature blinks for 10 seconds.
■
Adjusting the outside temperature display
Adjust the temperature reading by up to ±3°C if the temperature reading seems
incorrect.
Shows traffic signs while driving.
The indicator blinks when the maximum speed of the traffic sign detected by the
Traffic Sign Recognition System is exceeded.
Shows the current mode for ACC with Low Speed Follow and the LKAS.
2
Adaptive Cruise Control (ACC) with Low Speed Follow
P. 447
2
Lane Keeping Assist System (LKAS)
P. 467
■
Outside Temperature
■
Traffic Sign Recognition System
■
Current Mode for ACC with Low Speed Follow and the LKAS
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 30 km/h (19 mph).
It may take several minutes for the display to be
updated after the temperature reading has stabilised.
You can adjust the temperature reading.
2
P. 327
1
Traffic Sign Recognition System
You can turn the Traffic Sign Recognition System
Over Speed Warning on and off.
2
P. 327
156
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
Driver Information Interface
The driver information interface shows information such as the estimated travelable
distance and energy economy of the vehicle. It also displays messages such as
warnings and other helpful information.
■
Accessing contents in the display
Press the
(home) button, then roll the left selector wheel to scroll to the content
you want to see. Press the left selector wheel to see detailed information.
■
Switching the Display
1
To go back to the previous screen, press the
(back) button.
You can add or delete the meter contents.
2
P. 167
157
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
a
Left Selector Wheel
h
Speed Alarm
2
P. 163
b
(home) Button
i
Seat Belts
2
P. 164
c
Range & Energy
2
P. 158
j
Maintenance
*
2
P. 164
d
Speed & Time
2
P. 160
k
Safety Support
2
P. 165
e
Audio
2
P. 161
l
Customize Display
2
P. 167
f
Phone
2
P. 161
m
No Content/Unit Change
2
P. 168
g
Navigation
2
P. 162
n
Information
2
P. 168
* Not available on all models
158
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
Roll the left selector wheel to switch between trip meter A and trip meter B.
■
Range / Energy Consumption / Trip Meter
a
Average Energy Consumption
b
Range
c
Instant Energy Consumption
d
Trip Meter A
e
Trip Meter B
Continued
159
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
Trip meter
Shows the total number of kilometres or miles driven since the last reset. Meters A
and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, press the left selector wheel and then select
Reset
.
The trip meter is reset to
0.0
.
■
Average energy consumption
Shows the estimated average energy consumption of each trip meter in kWh/100km
or miles/kWh. The display is updated at set intervals. When a trip meter is reset, the
average energy consumption is also reset.
■
Instant energy consumption
Shows the instant energy consumption as a bar graph in kWh/100km or miles/kWh.
■
Range
Shows the estimated distance you can travel on the remaining power. This estimate
is based on the energy consumption of your previous trips and the remaining charge
of the High Voltage battery.
1
Switch between trip meter A and trip meter B by
rolling the left selector wheel.
1
You can change when to reset the average energy
consumption.
2
P. 327
1
The driving range displayed is only an estimate and
may differ to the actual distance the vehicle can
travel.
160
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
Roll the left selector wheel to switch between trip meter A and trip meter B.
■
Speed & Time
a
Average Speed
b
Elapsed Time
c
Trip meter A
d
Trip meter B
Continued
161
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
Trip meter
2
P. 159
■
Elapsed time
Shows the time elapsed since Trip A or Trip B was reset.
■
Average speed
Shows the average speed in km/h or mph since Trip A or Trip B was reset.
Shows the current audio information.
2
P. 257
Shows the current phone information.
2
■
Audio
■
Phone
1
You can change when to reset the elapsed time.
2
P. 327
1
You can change when to reset the average speed.
2
P. 327
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст