Honda e (2021 year). Manual in english — page 9
130
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press the
(home) button, select
(information), then press
the left selector wheel to see the message again with the system message indicator on.
Message
Condition
Explanation
•
Appears when the vehicle is no longer able to run
due to a malfunction.
•
Immediately stop in a safe place.
•
Appears when there is a risk that the vehicle will
move unexpectedly after you have stopped due to a
malfunction with the vehicle.
•
While the vehicle is stopped, apply the parking brake.
2
•
Have your vehicle checked by a dealer.
•
Appears after you set the power mode to
ACCESSORY or ON.
•
Appears after you unlock and open the driver’s door.
2
P. 381
●
Appears when you need to press the
POWER
button
because Auto Power ON is inhibited.
2
P. 198
●
Appears when you set the power mode to ON again
and the vehicle is able to run.
2
P. 381
Right-hand drive type
131
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if any door or the tailgate is not completely
closed.
•
Appears if any door or the tailgate is opened while
driving. The beeper sounds.
•
Disappears when all doors and the tailgate are closed.
•
Appears if there is a problem with the acoustic
vehicle alerting system.
•
Have your vehicle checked by a dealer immediately.
●
Appears when the bonnet is opened.
●
Close the bonnet.
•
Appears when there is a problem with the 12-volt
battery charging system.
•
Have your vehicle checked by a dealer.
132
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears once if the outside temperature is below
3°C while the power mode is in ON.
•
There is a possibility that the road surface is icy and
slippery.
•
Appears if there is a problem with the automatic
lighting control system.
•
Appears while driving
- Manually turn the lights on,
and have your vehicle checked by a dealer.
•
Appears if there is a problem with the headlights.
•
Appears while driving
- The headlights may not be
on. When conditions allow you to drive safely, have
your vehicle checked by a dealer as soon as possible.
(White)
•
Appears when you set the power mode to ON,
without fastening the driver’s seat belt.
•
Fasten the seat belt properly before you start to drive.
•
Appears when the driver’s seat belt is unfastened
while your vehicle is automatically stopped by ACC.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when pressing the
RES/+
or
SET/−
button
while the driver’s seat belt is unfastened.
•
ACC cannot be set.
2
133
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
(Amber)
•
Appears if the automatic brake hold is automatically
cancelled while it is in operation.
•
Immediately depress the brake pedal.
•
Appears if ACC is cancelled while your vehicle is
automatically stopped by ACC.
•
Immediately depress the brake pedal.
•
Appears if the single pedal control is cancelled while
your vehicle is automatically stopped by the single
pedal control.
•
Immediately depress the brake pedal.
(White)
•
Appears when the vehicle is brought into a
travelable state by Auto Power On.
•
Depress the brake pedal to start the vehicle.
•
Appears when the automatic brake hold system is
turned off.
2
134
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
•
Fasten the driver’s seat belt.
2
P. 504
•
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
•
Press the automatic brake hold button with the brake
pedal depressed.
2
P. 504
•
Appears when the parking brake is applied
automatically while it is in operation.
2
P. 504
2
P. 500
2
P. 398
•
Appears when the parking brake is applied
automatically while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
P. 447
2
P. 500
•
Appears when pressing the
RES/+
or
SET/−
button
while the parking brake is applied.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
P. 447
2
P. 500
•
Appears when the single pedal control system is
automatically turned off while the parking brake is
engaged.
—
135
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
•
Press the electric parking brake switch with the brake
pedal depressed.
2
•
Appears as soon as a problem is detected in the
keyless access system or keyless starting system.
•
Appears constantly
- Have your vehicle checked by a
dealer.
•
Appears when you close the door with the power
mode in ON without the keyless remote inside the
vehicle.
•
Disappears when you bring the keyless remote back
inside the vehicle, and close the door.
2
P. 200
●
Appears when you depress the brake pedal after
Auto Power ON without the keyless remote inside
the vehicle.
●
Disappears when you bring the keyless remote back
inside the vehicle, and depress the brake pedal after
Auto Power ON.
•
Appears when the keyless remote battery becomes
weak.
2
136
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the power mode is in ACCESSORY.
—
•
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
•
Change the power mode to VEHICLE OFF.
2
•
Appears if the keyless remote’s battery is too weak
to turn on the power system or the key is not within
operating range to turn on the power system. The
beeper sounds six times.
•
Bring the back of the keyless remote into contact with
the
POWER
button.
2
If the Keyless Remote Battery is Weak
•
Appears if you press the
POWER
button while the
vehicle is moving.
2
P. 650
●
Appears when you press and hold the
(
N
button for
more than 2 seconds.
●
Disappears when you set the shift position to other than
(
N
.
2
If you want to keep the transmission in
(
N
position (car wash mode)
P. 391
137
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when you change to
(
N
, and press the
POWER
button within five seconds.
•
The shift position remains in
(
N
for 15 minutes, then
automatically switches to
(
P
.
2
If you want to keep the transmission in
(
N
position (car wash mode)
P. 391
•
Appears when the vehicle is stopped with the
driver’s seat belt unfastened and there is a chance
that the vehicle may roll unintentionally.
•
Press the
(
P
button before releasing the brake pedal
when idling, parking or exiting the vehicle.
2
•
Appears when you set the power mode to OFF while
driving.
•
Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
•
Appears when the High Voltage battery and other
system control temperatures are too low to operate
(approx. −30°C or below).
•
You must wait for an increase in the ambient
temperature or move the vehicle to a warmer location.
•
Contact a dealer if necessary.
138
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the power system temperature is
high.
•
Your vehicle has less ability to accelerate and may be
harder to start on an incline.
•
Park in a safe place, and cool the system down.
2
P. 654
•
Appears when the High Voltage battery temperature
is low.
•
Your vehicle has less ability to accelerate and may be
harder to start on an incline.
•
In extremely cold climates, keep the vehicle stored in a
garage or connect the charging connector.
2
Charge the High Voltage battery using a AC or
CCS2 DC charger
P. 563
•
Appears after the 12-volt battery charging system
indicator comes on.
•
Your vehicle has less ability to accelerate and may be
harder to start on an incline.
•
Contact a dealer immediately.
•
Appears if the power system is in diagnostic mode.
•
You may notice a decrease in available power. Have
your vehicle checked by a dealer.
•
As a result of diagnostics, the power system indicator
may come on.
2
P. 111
●
Appears when the High Voltage battery charge level
is extremely low.
●
Caused by the low battery charge level
-
Immediately charge the High Voltage battery.
139
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when there is a problem with the standard
plug-in charging system or the charging station outlet.
●
This message only
- There may be a problem with
the charging station outlet. Refer to the instructions
provided at the station or consult a qualified
technician. If the outlet works properly, have the
vehicle checked by a dealer.
●
Comes on with the POWER SYSTEM indicator
-
Have your vehicle checked by a dealer.
●
Appears when there is a problem with the quick plug-
in charging system or the charging station outlet.
●
This message only
- There may be a problem with
the charging station outlet. Refer to the instructions
provided at the station or consult a qualified
technician. If the outlet works properly, have your
vehicle checked by a dealer.
●
Comes on with the POWER SYSTEM indicator
-
Have your vehicle checked by a dealer.
●
Appears when the charge lid is open.
●
Close the charge lid.
2
P. 562
•
Appears when the vehicle speed reaches the set speed.
You can set two different speeds for the alarm.
2
P. 163
140
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when there is a problem with the pop-up
hood system.
●
Have your vehicle checked by a dealer.
2
P. 72
•
Appears when you depress the accelerator pedal while
the shift position is in
(
N
.
•
Remove your foot off the accelerator pedal. When
driving, depress the brake pedal and operate the
shift position.
•
Appears when you repeatedly change the shift
position between
(
P
and other positions in short
period.
•
Take some time before changing the shift position.
•
Appears when you try to change the shift position
without releasing your foot off the accelerator pedal.
•
Release your foot off the accelerator pedal, then
select a shift button.
141
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the
(
P
button is pressed while the
vehicle is moving.
•
Appears if you put the transmission into
(
R
while the
vehicle is moving forward, or into
(
D
while the vehicle
is reversing.
•
Make sure that the vehicle comes to a stop before
operating the shift button.
•
Appears when you try to change the shift position
without depressing the brake pedal.
•
Depress the brake pedal, then select a shift button.
•
Appears if there is a problem with the auto high-beam.
•
Manually operate the headlight switch.
•
If you are driving with the high beam headlights
when this happens, the headlights are changed to
low beams.
•
Appears if anything covers the radar sensor cover and
prevents the sensor from detecting a vehicle in front.
•
May appear when driving in bad weather (rain, snow,
fog, etc.)
•
When the radar sensor gets dirty, stop your vehicle in
a safe place, and wipe off dirt using a soft cloth. The
message may take some time to go off.
•
Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2
2
P. 427
142
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if anything covers the sonar sensor and
prevents the sensor from detecting.
•
May appear when driving in bad weather (rain,
snow, fog, etc.)
•
When the sonar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth.
•
Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2
P. 497
2
P. 427
•
Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
•
Use the climate control system to cool down the
camera.
•
Disappears
- The camera has been cooled down and
the systems are activated normally.
2
P. 494
2
P. 427
•
Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
•
May appear when driving in bad weather (rain,
snow, fog, etc.)
•
When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
•
Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2
P. 494
2
P. 427
143
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when pressing the
RES/+
or
SET/−
button
while the distance between your vehicle and the
vehicle ahead of you is too close.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when the speed of the vehicle is too high
for you to set ACC.
•
Reduce the speed, then set ACC.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when ACC is cancelled due to excessive
high vehicle speed.
•
Reduce the speed, then reset ACC.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears if ACC cannot be set due to repeated
deceleration, driving on a long downward slope, or
excess vehicle weight.
•
Wait awhile, then reset ACC.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears just before ACC is automatically cancelled
due to repeated deceleration, driving on a long
downward slope, or excess vehicle weight. (Will
automatically open until the distance between your
vehicle and the vehicle ahead is the maximum set in
distance settings.)
●
ACC will be cancelled automatically.
2
144
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the vehicle ahead of you resumes
driving, after your vehicle has been stopped
automatically by ACC.
•
Press the
RES/+
or
SET/-
button or depress the
accelerator pedal to resume.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when the shift position is changed to any
position other than
(
D
while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when pressing the
RES/+
or
SET/−
button
while the shift position is in any position other than
(
D
.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when the vehicle is stopped on a very steep
slope while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when pressing the
RES/+
or
SET/−
button
while the vehicle is stopped on a very steep slope.
•
ACC cannot be set.
2
145
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if the VSA or traction control function
operates while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Appears when pressing the
RES/+
or
SET/−
button
while the vehicle is moving and the brake pedal is
depressed.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
•
Flashes when the system senses a likely collision. The
beeper sounds.
•
Take appropriate action to prevent a collision (apply the
brakes, change lanes, etc.)
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
2
Collision Mitigation Braking System (CMBS)
2
•
Appears when the low speed braking control system
is activated.
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст