Honda Odyssey 2004. Manual — part 592
−
−
−
−
−
−
*04
11
*05
13
YES
NO
YES
NO
23-310
SRS
DTC Troubleshooting (cont’d)
C505
SRS UNIT CONNECTOR B (28P)
BLU
BLU
C503
SRS UNIT CONNECTOR B (28P)
SRS MAIN HARNESS
8P CONNECTOR C503
BLU
BLU
25. Disconnect dashboard wire harness A 21P
connector C505 from the right side wire harness.
26. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and the No. 2 terminal
1.0
.
Open in the BLU wire of the right side wire
harness, passenger’s seat wire harness (with seat
heater), or OPDS unit harness; replace the faulty
harness.
Go to step 27.
27. Disconnect SRS main harness 8P connector C503
from dashboard wire harness A.
28. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and the No. 1 terminal
of SRS main harness 8P connector C503. There
should be 0
1.0
.
Open in the BLU wire of dashboard wire
harness A; replace dashboard wire harness A.
Go to step 29.
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:41:06 61S0X050_230_0310
of dashboard wire harness A 21P connector C505.
There should be 0
21P CONNECTOR C505
DASHBOARD WIRE HARNESS A
−
−
−
−
−
*06
15
*07
17
YES
NO
YES
NO
23-311
C851
A
SRS UNIT CONNECTOR B (28P)
SRS FLOOR HARNESS
28P CONNECTOR C851
BLU
BLU
C505
SRS UNIT CONNECTOR B (28P)
BLU
29. Disconnect SRS floor harness 28P connector (A)
from the SRS main harness connector C851.
30. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and the No. 16 terminal
of SRS floor harness 28P connector C851. There
should be 0
1.0
.
Open in the BLU wire of the SRS main
harness; replace the SRS main harness.
Open in the BLU wire of the SRS floor
harness; replace the SRS floor harness.
31. Disconnect dashboard wire harness A 21P
connector C505 from the right side wire harness.
32. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and body ground. There
should be an open circuit, or at least 1 M
.
Short to ground in the right side wire harness,
passenger’s seat wire harness (with power seat), or
OPDS unit harness; replace the faulty harness.
Go to step 33.
(cont’d)
Wire side of female terminals
Terminal side of male terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:41:07 61S0X050_230_0311
−
−
−
−
*08
19
*09
21
YES
NO
YES
NO
23-312
SRS
DTC Troubleshooting (cont’d)
C503
SRS UNIT CONNECTOR B (28P)
BLU
C851
A
SRS UNIT CONNECTOR B (28P)
BLU
33. Disconnect SRS main harness 8P connector C503
from dashboard wire harness A.
34. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and body ground. There
should be an open circuit, or at least 1 M
.
Short to ground in dashboard wire harness
A; replace dashboard wire harness A.
Go to step 35.
35. Disconnect SRS floor harness 28P connector (A)
from the SRS main harness connector C851.
36. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and body ground. There
should be an open circuit, or at least 1 M
.
Short to ground in the SRS main harness;
replace the SRS main harness.
Short to ground in the SRS floor harness;
replace the SRS floor harness.
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:41:08 61S0X050_230_0312
−
−
−
−
S0X4AZBK791000R814XFAAT00
S0X4ASIK791000R854XFAAT00
’03-04 Models
DTC 81-4x (81-40 to 81-49, 81-4A to 81-4F),
81-5x (81-50 to 81-59, 81-5A to 81-5F),
81-63, 81-64:
’03-04 Models
DTC 85-4x (85-40 to 85-49, 85-4A to 85-4F),
85-5x (85-50 to 85-59, 85-5A to 85-5F),
85-63, 85-64:
YES
NO
YES
NO
23-313
23-313
Internal Failure of the Front
Passenger’s Weight Sensor Unit
Internal Failure of the OPDS Unit
1. Erase the DTC memory (see page 23-39).
2. Turn the ignition switch ON (II), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Replace the front passenger’s weight sensor
unit (see page 23-391).
Intermittent failure, system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-39).
1. Erase the DTC memory (see page 23-39).
2. Turn the ignition switch ON (II), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Replace the OPDS unit (see page 23-387).
Intermittent failure, system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-39).
Does the SRS indicator stay on?
Does the SRS indicator stay on?
03/07/29 10:41:08 61S0X050_230_0313
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст