Honda Odyssey 2004. Manual — part 366
08
09
10
08
09
Seat Cushion Cover
8-way power seat
All except 8-way power seat
’99-01 models
’02-04 models (8-way power/manual except
leather seat cover)
’02-04 models (manual height adjustable)
20-106
Seats
Front Seat Cover Replacement (cont’d)
A
B
B
C
B
A
B
B
C
B
B
B
A
B
A
B
A
B
1. Remove the front seat (see page 20-81).
2. Remove the seat cushion, 8-way power without
side airbag (see page 20-86), 8-way power with side
airbag (see page 20-87), manual height adjustable
without side airbag (’01 model) (see page 20-88),
manual height adjustable with side airbag
(’02 model) (see page 20-89), manual height
adjustable (’03-04 models) (see page 20-90),
manual without side airbag (see page 20-91),
manual with side airbag (see page 20-92), manual
(’03-04 models) (see page 20-93).
3. Release the clips (A) and hooks (B) from under the
seat cushion, then loosen the seat cushion cover
(C).
4. Pull back the edge of the seat cushion cover all the
way around, and release the clips (A), then remove
the seat cushion cover (B).
03/07/29 10:03:17 61S0X050_200_0108
10
*01
’02-04 models (leather seat cover)
20-107
A
B
A
B
5. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles when installing a seat
cushion cover, make sure the material is
stretched evenly over the pad before securing
the clips and hooks.
• Replace any clips (A) you removed with new
ones using commercially available upholstery
ring pliers (B).
03/07/29 10:03:18 61S0X050_200_0109
*01
S0X4A22J46170553903MFAT10
20-108
Seats
Second Row Seat Disassembly/Reassembly - Bucket-type
PIVOT BOLT
10 x 1.25 mm
21 N·m (2.1 kgf·m, 15 lbf·ft)
CENTER COVER
HOOK
INNER PIVOT
COVER
HEADREST
SEAT-BACK
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
RECLINE
COVER
RECLINE
KNOB
8 x 1.25 mm
21 N·m (2.1 kgf·m,
15 lbf·ft)
SLIDE ADJUSTER/
RISER ASSEMBLY
TRACK END
CORD
TRACK END
COVER
8 x 1.25 mm
21 N·m (2.1 kgf·m,
15 lbf·ft)
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
TRACK
END CORD
SLIDE
ADJUSTER
HOOK
TRACK
END COVER
HOOK
SEAT CUSHION
’02-04 models
HOOKS
RECLINE
COVER
RECLINE
KNOB
To seat cushion
frame
BEVERAGE
HOLDER
SUB BRACKET
BEVERAGE
HOLDER
NOTE: Apply liquid thread lock to the bolts securing the seat-back and seat cushion.
03/07/29 10:03:19 61S0X050_200_0110
21
S0X4A23J46170553903MFAT20
For some ’99-01 models
20-109
Second Row Seat Disassembly/Reassembly - Bench-type
HEADREST
RIGHT RECLINE COVER
RECLINE KNOB
SEAT-BACK
RECLINE
KNOB
SEAT CUSHION/RISER ASSEMBLY
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
LEFT RECLINE COVER
NOTE: Apply liquid thread lock to the bolts securing the seat-back and seat cushion.
03/07/29 10:03:19 61S0X050_200_0111
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст