Honda Accord Hybrid (2022 year). Manual in english — page 10
158
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
If two bars light up, the
Driver Attention
Level Low
message will appear.
If one bar lights up, the
Driver Attention
Level Low. Time For A Break
message will
appear, a beep will sound, and the steering
wheel will vibrate.
If this message appears, stop in a safe location
and rest for as long as needed.
The message will disappear when the left
selector wheel is pressed or when the system
has determined that the driver is driving
normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the message will appear again after
approximately 15 minutes, accompanied by a
beep and steering wheel vibrations.
The message does not appear when the
traveling time is 30 minutes or less.
Continued
159
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
■
The Driver Attention Monitor resets when:
•
The power system is turned off.
•
The driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function:
•
The vehicle must be traveling above 25 mph (40 km/h).
•
The electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:
•
The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2
Lane Keeping Assist System (LKAS)
•
The condition of the road is poor, e.g. the surface is unpaved or bumpy.
•
It is windy.
•
The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select
Tactile And Audible
Alert
,
Tactile Alert
, or
OFF
.
2
P. 357
1
For the Driver Attention Monitor to function:
The bars on the driver information interface remain
grayed out unless the Driver Attention Monitor is
functioning.
uu
Gauges and Displays
u
Driver Information Interface
160
In
strum
ent Pa
nel
Shows the distance between your vehicle and
the vehicle detected ahead.
Informs you whether ACC with Low Speed
Follow and/or LKAS is activated or not. If ACC
with Low Speed Follow is activated, the set
following interval is displayed. If LKAS is
activated, the displayed lane marks change to
indicate that LKAS is activated.
2
Adaptive Cruise Control (ACC) with Low
Speed Follow
2
Lane Keeping Assist System (LKAS)
P. 480
■
Driving Support Information
1
In case ACC with Low Speed Follow is not activated,
when the distance between your vehicle and the
vehicle ahead becomes too small, the section behind
the vehicle icon turns amber and alerts you.
Amber gradation
Icon of vehicle ahead
Distance to vehicle ahead
When ACC with Low Speed Follow and
LKAS are On
Set Vehicle Interval
ACC with Low Speed Follow on:
The section behind the vehicle icon
turns green.
LKAS on: The lane outlines appear
on the display.
LKAS starts: The lane lines change
to solid ones.
LKAS suspend: The lane lines
change to dotted ones.
Continued
161
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
Indicates the status of RDM, Low Speed Braking Control
*
, CMBS
TM
, and blind spot
information system
*
, such as On, Off, or Failure, by color and letters.
The following colors indicate the status of any of the above mentioned systems:
•
Green: The system is on.
•
Gray: The system is off.
•
Amber: There is a problem with the system.
■
Safety Support
1
If a system is indicated by the color amber, have your
vehicle checked by a dealer immediately.
To turn on or off each system, first rotate the left
selector wheel to switch displays. From the next
display you can select which system to turn on or off.
2
2
2
Blind spot information system on and off
P. 445
2
P. 461
You can also confirm the status of each function by
the color of the safety support indicator.
2
Safety Support Indicator (Amber)
P. 111
2
Safety Support Indicator (Green/Gray)
P. 114
Even when the Low Speed Braking Control icon is
green, if the parking sensor is turned off for the rear
only, the brake assist will not operate when reversing.
2
Models with Low Speed Braking Control
Area Info for
CMBS
TM
CMBS
TM
Icon
and Status Info
Area Info for
blind spot
information
system
*
RDM Icon and
Status Info
Area Info for
RDM
Blind spot
information
system Icon
and Status
Info
*
Low Speed
Braking Control
Icon and Status
Info
*
Area Info for the Low
Speed Braking Control
*
* Not available on all models
162
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
Shows the average fuel economy for the last
three driving cycles (1-3), and the current
driving cycle (0) in mpg or l/100 km.
Each time you set the power mode to ON, the
display is updated, and the oldest record is
deleted.
■
Average Fuel Economy Records
Continued
163
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
■
Eco Drive Display
The vehicle icon on the display moves forward or backward while driving.
The more aggressive the acceleration is, the further the icon moves forward.
The more aggressive the deceleration is, the further the icon moves backward.
Keep the icon near the center of the circle for better fuel economy while driving.
■
Eco Drive Display/Drive Cycle Score/Lifetime Points
1
Switch between the average fuel economy A and
average fuel economy B by rolling the left selector
wheel.
Aggressive
Deceleration
Vehicle Icon
Aggressive
Acceleration
Moderate
Deceleration
Slow
Acceleration/
Deceleration
Moderate
Acceleration
Average Fuel
Economy
164
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
■
Drive Cycle Score/Lifetime Points
Appear for a few seconds when you set the power mode to VEHICLE OFF. Each has
three stages. Depending on your driving style, the leaf icon(s) and the gauge
increase or decrease to indicate that you have reached a different stage of fuel
economy.
■
Resetting the Drive Cycle Score
1.
Make sure the shift position is in
(
P
. Turn the power mode to ON.
2.
If ECON mode is on, press the
ECON
button to turn it off.
3.
Turn the power mode to VEHICLE OFF.
4.
Turn the power mode to ON again.
u
Make sure to complete steps from 4 through 6 within 30 seconds.
5.
Depress the brake pedal twice.
6.
Press the
ECON
button twice.
u
The color of the ambient meter will turn to monochrome.
7.
Turn the power mode to VEHICLE OFF.
Drive Cycle Score
Lifetime Points
Advancing
to 2nd
Stage
Receding
to 1st
Stage
Advancing
to 3rd
Stage
Receding
to 2nd
Stage
165
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
Displays the power flow of the motor and engine, indicating the vehicle’s power
source and whether the battery is being charged.
■
Power Flow Monitor
1
While the vehicle is stationary with the engine
running, the following may appear on the driver
information interface.
Power is supplied
by the motor and
the engine.
Hybrid (HV)
The engine is running
and the motor is
charging the High
Voltage battery.
Power is being
supplied by the
engine only.
Engine ON
Engine OFF
Power is supplied
by the motor.
Electric Vehicle (EV)
The engine is running
and the motor is
charging the High
Voltage battery.
Engine (Direct Drive)
Power Flow
Engine
The motor is
charging the High
Voltage battery.
Regeneration
166
uu
Gauges and Displays
u
Head-Up Display
*
In
strum
ent Pa
nel
Head-Up Display
*
Shows the current mode for ACC with Low Speed Follow and the LKAS, POWER/
CHARGE gauge, traffic sign recognition system, shift position and deceleration
paddle selector indicator, compass or turn-by-turn directions along with the vehicle
speed. You can choose which item to be displayed using the (
HUD
) button on the
steering wheel. They are displayed when the power mode is in ON.
To turn the head-up display on and off
: Press the
HUD
button on the driver
side control panel.
The display can be moved up and down to become level with your eyes.
To raise or lower the head-up display
: Press the
or
button until the
desired position is reached.
1
When you unlock and open the driver’s door with a
remote transmitter or keyless access system, the
head-up display adjusts automatically to one of the
two preset positions.
3
4
/
Button
3 4
HUD
Button
Head-Up Display
Press the button to raise
the display.
3
Press the
button to
lower the display.
4
* Not available on all models
167
uu
Gauges and Displays
u
Head-Up Display
*
Continued
In
strum
ent Pa
nel
The display also shows the following
warnings.
•
Lane Departure Warning:
When your
vehicle is too close to the traffic lane lines,
the lane departure warning appears.
2
Lane Keeping Assist System (LKAS)
P. 480
•
Head-up Warning Lights:
Flash when the
BRAKE
message appears on the driver
information interface.
2
Collision Mitigation Braking System
2
Adaptive Cruise Control (ACC) with
Low Speed Follow
2
Lane Departure Warning
* Not available on all models
168
uu
Gauges and Displays
u
Head-Up Display
*
In
strum
ent Pa
nel
Each time you press the (
HUD
) button on the steering wheel, the head-up display
content will change.
■
To Change Head-Up Display Content
Head-Up Display
Current Mode for ACC
with Low Speed Follow
and the LKAS, Vehicle
Speed, Traffic Sign
Recognition System
Vehicle Speed, Traffic
Sign Recognition
System
POWER/CHARGE Gauge, Shift
Position Indicator, Deceleration
Paddle Selector Indicator,
Vehicle Speed, Traffic Sign
Recognition System
Traffic Sign Recognition
System, Vehicle Speed
Turn-by-Turn
Directions, Vehicle
Speed, Traffic Sign
Recognition System
Compass, Vehicle
Speed, Traffic Sign
Recognition System
(
HUD
) Button
Continued
169
uu
Gauges and Displays
u
Head-Up Display
*
In
strum
ent Pa
nel
Shows your driving speed in mph or km/h.
Shows the degree for POWER/CHARGE as a bar graph.
Shows the current shift position.
2
P. 97
Shows the current deceleration stage for the deceleration paddle selector.
2
Deceleration Paddle Selector Indicator
P. 97
2
P. 423
Shows the current mode for ACC with Low Speed Follow and the LKAS.
2
Adaptive Cruise Control (ACC) with Low Speed Follow
P. 464
2
Lane Keeping Assist System (LKAS)
P. 480
■
Vehicle Speed
■
POWER/CHARGE Gauge
■
Shift Position Indicator
■
Deceleration Paddle Selector Indicator
■
Current Mode for ACC with Low Speed Follow and the LKAS
1
Switch between mph and km/h by using the driver
information interface or customized features on the
audio/information screen.
2
2
P. 357
uu
Gauges and Displays
u
Head-Up Display
*
170
In
strum
ent Pa
nel
■
Compass
Shows the compass screen.
■
Turn-by-Turn Directions
When driving guidance is provided by the navigation system, Android Auto or Apple
CarPlay, turn-by-turn directions to your destination appear.
2
Refer to the Navigation System Manual
2
P. 326
2
Shows the traffic sign recognition system.
2
Traffic Sign Recognition System
■
Navigation
■
Traffic Sign Recognition System
1
You can select whether to have the turn-by-turn
display come on or not during the route guidance.
2
P. 357
Turn-by-turn directions may not be available for all
apps.
171
Controls
This chapter explains how to operate the various controls necessary for driving.
. . . . . . . . . . . . .. 172
Locking and Unlocking the Doors
Outside . . . . . . . . . . .. 176
Locking/Unlocking the Doors from the
Inside . . . . . . . . . . . . 183
Childproof Door Locks . . . . . . 185
Auto Door Locking/Unlocking . . .. 186
Immobilizer System . . . . . . .. 190
Security System Alarm. . . . . .. 190
Operating the Switches Around the
Rear Defogger/Heated Door Mirror Button ..210
Heated Windshield Button
*
Brightness Control . . . . . . ... 211
Driving Position Memory System
Adjusting the Steering Wheel . . .. 215
Interior Rearview Mirror . . . . ... 216
Power Door Mirrors . . . . . . . 217
. . . . . . . . . . . . .. 218
Using Automatic Climate Control . 244
Automatic Climate Control Sensors. ..248
* Not available on all models
172
Co
ntrols
Clock
Adjusting the Clock
You can adjust the time manually in the audio/information screen, with the power
mode in ON.
1
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
Models with navigation system
173
uu
Clock
u
Adjusting the Clock
Co
ntrols
1.
Press the
(Home) button, then select
Settings
.
2.
Select
System
.
3.
Select
Day & Time
.
4.
Select
Set Date & Time
.
5.
Select
Automatic Date & Time
, then
select
OFF
.
To adjust time:
6.
Select
Set Time
.
7.
Selecting /
.
8.
Select
Save
to set the time.
To adjust date:
6.
Select
Set Date
.
7.
Selecting /
.
8.
Select
Save
to set the date.
■
Adjusting the Time
1
You can also adjust the clock by touching the clock
displayed on the upper right corner of the display or
the
Clock
icon on the home screen.
1. Touch the clock on the display.
The clock screen of the select face-type appears.
2. Select
Settings
.
3. Select
Day & Time
.
4. Select
Set Date & Time
.
5. Select
Automatic Date & Time
, then select
OFF
.
6. Select
Set Date
or
Set Time
.
7. Adjusting the dates, hours and minutes by
selecting /
.
8. Select
Save
to set the time.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
2
P. 357
You can customize the date display to
MM/DD/
YYYY
,
DD/MM/YYYY
or
YYYY/MM/DD
.
2
P. 357
3 4
3 4
3 4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст