Honda Accord Hybrid (2022 year). Manual in english — page 9
uu
Gauges and Displays
u
Gauges
142
In
strum
ent Pa
nel
Shows the remaining High Voltage battery charge level.
■
High Voltage Battery Charge Level Gauge
1
High Voltage Battery Charge Level Gauge
The High Voltage battery charge level may decrease
under the following conditions:
•
When the 12-volt battery has been replaced.
•
When the 12-volt battery has been disconnected.
•
When the High Voltage battery control system
corrects its reading.
The charge level reading will be corrected
automatically while driving.
Changes in the temperature of the High Voltage
battery can increase or decrease the battery’s
charging capacity. If temperature changes cause the
battery’s capacity to change, the number of
indicators in the battery charge level gauge may also
change, even if the amount of charging remains the
same.
143
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
Driver Information Interface
The driver information interface shows information such as the estimated travelable
distance and fuel economy of the vehicle. It also displays messages such as warnings
and other helpful information.
■
Accessing contents in the main display
Press the
(home) button, then roll the left selector wheel to scroll to the content
you want to see. Press the left selector wheel to see detailed information.
■
Switching the Display
1
To go back to the previous screen, press the
(back) button.
You can edit, add, or delete the meter contents using
the audio/information screen.
2
P. 272
144
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
(Home) Button
Left Selector Wheel
Roll the left selector
wheel.
Warnings
P. 152
Safety Support
P. 161
Maintenance
P. 152
Rear Seat Belts
P. 156
Driver Attention
P. 157
Driving Support
P. 160
Traffic Sign
P. 155
Navigation
P. 151
Power/Charge
P. 154
Eco Drive
P. 163
Power Flow
P. 165
Range & Fuel
P. 147
Fuel Economy
P. 162
Speed & Time
P. 149
Audio
P. 155
Phone
P. 153
145
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
■
Sub display
Press the
TRIP
button to change the display.
Shows the total number of miles or kilometers that your vehicle has accumulated.
■
Odometer
Odometer
Outside Temperature
Trip A
Trip B
TRIP
Button
TRIP
TRIP
TRIP
uu
Gauges and Displays
u
Driver Information Interface
146
In
strum
ent Pa
nel
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the
TRIP
Button. The trip meter
is reset to
0.0
.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading
seems incorrect.
■
Trip Meter
■
Outside Temperature
1
Switch between trip meter A and trip meter B by
pressing the
TRIP
Button.
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
You can adjust the temperature reading.
2
P. 357
147
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
Roll the left selector wheel to switch between trip computer A and trip computer B.
■
Range & Fuel
Left Selector Wheel
Roll
Trip Computer A
Trip Computer B
Trip Meter
Range
Average Fuel
Economy
Instant Fuel
Economy
uu
Gauges and Displays
u
Driver Information Interface
148
In
strum
ent Pa
nel
■
Trip meter
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, then press the left selector wheel and then select
Reset
.
u
The trip meter is reset to
0.0
.
■
Average fuel economy (Avg. Fuel)
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
■
Instant fuel economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
■
Range
Shows the estimated distance you can travel on the remaining power and fuel. This
estimated distance is based on the vehicle’s current fuel economy.
1
Switch between trip meter A and trip meter B by
rolling the left selector wheel.
When resetting the trip meter in the
Range & Fuel
,
the trip meter in the sub display resets at the same
time.
1
You can change when to reset the average fuel
economy.
2
P. 357
149
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
Roll the left selector wheel to switch between trip computer A and trip computer B.
■
Speed & Time
Roll
Trip Computer A
Trip Computer B
Trip Meter
Average Speed
Elapsed Time
Left Selector Wheel
uu
Gauges and Displays
u
Driver Information Interface
150
In
strum
ent Pa
nel
■
Trip meter
2
■
Elapsed time
Shows the time elapsed since Trip A or Trip B was reset.
■
Average speed (Avg. Speed)
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
1
You can change when to reset the elapsed time.
2
P. 357
1
You can change when to reset the average speed.
2
P. 357
Continued
151
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
■
Compass
Shows the compass screen.
■
Turn-by-Turn Directions
When driving guidance is provided by the
navigation system
*
, Android Auto or Apple
CarPlay, turn-by-turn directions to your
destination appear.
2
Refer to the Navigation System Manual
2
2
P. 320
■
Navigation
1
You can select whether to have the turn-by-turn
display come on or not during the route guidance.
2
P. 357
Turn-by-turn directions may not be available for all
apps.
When the compass or turn-by-turn directions are
displayed, you can control some navigation system
functions on the driver information interface by
scrolling the left selector wheel.
2
Refer to the navigation system
Models with navigation system
Compass
Turn-By-Turn Driving Directions
* Not available on all models
uu
Gauges and Displays
u
Driver Information Interface
152
In
strum
ent Pa
nel
2
Driver Information Interface Warning and
Information Messages
P. 115
Shows the remaining oil life and Maintenance
Minder
TM
.
2
■
Warnings
1
If there are no Warnings,
None
message appears on
the driver information interface.
If there are multiple warnings, you can roll the left
selector wheel to see other warnings.
(Example)
■
Maintenance
153
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
Shows the current phone information.
2
■
Phone
154
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
■
Electric motor
The degree to which the electric motor is
being powered is displayed by the readings on
the
POWER
side.
■
Battery charge in progress
The degree to which the High Voltage battery
is being charged is displayed by the readings
on the
CHARGE
side.
■
Speed/Distance Units
Enables you to show another unit on the
driver information interface, head-up display
*
and audio/information screen and set the
displayed measurements to read in either
miles and mph or km and km/h.
Press and hold the left selector wheel when
you select
Power/Charge
on the driver
information interface. Each time you do this,
the unit will change from
miles, mph
to
km,
km/h
or vice versa. After this, a confirmation
screen will appear for a few seconds.
■
POWER/CHARGE Gauge
* Not available on all models
155
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
Shows the current audio information.
2
Shows the traffic sign recognition system.
2
Traffic Sign Recognition System
P. 493
■
Audio
■
Traffic Sign Recognition System
156
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
Appears when any of the rear seat belts are
latched or unlatched.
2
P. 46
■
Rear Seat Belt Reminder
Continued
157
uu
Gauges and Displays
u
Driver Information Interface
In
strum
ent Pa
nel
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select
Driver Attention
on the
driver information interface, bars on it light up
in white to indicate the degree of the driver’s
attention.
2
Accessing contents in the main display
P. 143
■
Driver Attention Monitor
1
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information
Interface
Left Selector Wheel
(Home) Button
Level
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст