Honda Accord (2019 year). Instruction — part 7

96

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Security System
Alarm Indicator

• Blinks when the security system

alarm has been set.

2 Security System Alarm P. 184

System
Message
Indicator

• Comes on along with a beep when

a problem is detected. A system
message on the driver information
interface appears at the same time.

• While the indicator is on, press the

(home) button to see the message again.

2 Accessing contents in the main

display P. 138

• Refer to the Indicators information in this

chapter when a system message appears
on the driver information interface. Take
the appropriate action for the message.

• The driver information interface does not

return to the normal screen unless the
warning is canceled, or the left selector
wheel is pressed.

Indicator

97

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models without the adaptive damper system
*2:Models with the adaptive damper system

Indicator

Name

On/Blinking

Explanation

Message

ECON Mode
Indicator

• Comes on when you press the

ECON button.

2 ECON Button P. 492

*1

*2

98

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models without the adaptive damper system
*2:Models with the adaptive damper system

Indicator

Name

On/Blinking

Explanation

Message

SPORT Mode
Indicator

*

• Comes on when you press the

SPORT button.

• The ambient meter remains lit up in

red as long as SPORT mode is on.

2 SPORT Mode

*

P. 491

*1

*2

* Not available on all models

99

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Adaptive
Cruise Control
(ACC) with Low
Speed Follow
(LSF) Indicator
(Amber)

*

/

Adaptive
Cruise Control
(ACC) Indicator
(Amber)

*

Comes on if there is a problem with
ACC with LSF

*

/ACC

*

.

Stays on constantly - Have your vehicle
checked by a dealer.

Comes on if the ACC with LSF

*

/

ACC

*

is deactivated temporarily

after the battery has been
disconnected, then re-connected.

Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.

Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.

ACC with LSF

*

/ACC

*

has been

automatically canceled.

Make sure the total load is within the
Maximum Load Limit.

2 Maximum Load Limit P. 457

* Not available on all models

100

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Adaptive
Cruise Control
(ACC) with Low
Speed Follow
(LSF) Indicator
(Green)

*

/

Adaptive
Cruise Control
(ACC) Indicator
(Green)

*

Comes on when you press the
MAIN button.

2 Adaptive Cruise Control (ACC) with

Low Speed Follow (LSF)

*

P. 519

2 Adaptive Cruise Control (ACC)

*

P. 535

Lane Keeping
Assist System
(LKAS)
Indicator
(Amber)

Comes on if there is a problem with
the LKAS.

Stays on constantly - Have your vehicle
checked by a dealer.

Lane Keeping
Assist System
(LKAS)
Indicator
(Green)

Comes on when you press the
MAIN button.

2 Lane Keeping Assist System (LKAS)

P. 550

* Not available on all models

101

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support
Indicator
(Amber)

Comes on if there is a problem with
RDM, CMBS

TM

, or the blind spot

information system

*

.

Stays on constantly - Have your vehicle
checked by a dealer.

Comes on if the RDM and CMBS

TM

are deactivated temporarily after
the battery has been disconnected
and then re-connected.

Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.

* Not available on all models

102

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support
Indicator
(Amber)

Comes on when RDM and/or
CMBS

TM

shuts itself off.

Indicator may come on temporarily when
passing through an enclosed space, such
as tunnel.

The area around the radar sensor is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.

Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor.

2 Collision Mitigation Braking

System

TM

(CMBS

TM

) P. 510

Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.

2 Front Sensor Camera P. 568

* Not available on all models

103

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support
Indicator
(Amber)

Comes on when RDM and/or
CMBS

TM

shuts itself off.

Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.

Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.

2 Front Sensor Camera P. 568

Comes on when mud, snow, or ice
has accumulated in the vicinity of
the blind spot information system
sensor.

Comes on while driving - Something
may be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information
system sensor and remove any obstacles.

2 Blind spot information System

*

P. 502

Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.

Make sure the total load is within the
Maximum Load Limit.

2 Maximum Load Limit P. 457

Models with the blind spot
information system

* Not available on all models

104

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support
Indicator
(Green/Gray)

Lights up in green when RDM,
CMBS

TM

, and the blind spot

information system

*

are on.

Lights up in green and gray when
RDM, CMBS

TM

, or the blind spot

information system

*

, or any two of

these systems are off.

Lights up in gray when RDM,
CMBS

TM

, and the blind spot

information system

*

are off.

2 RDM On and Off P. 560
2 CMBS

TM

On and Off P. 513

2 Blind spot information System On

and Off P. 504

* Not available on all models

105

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Driver Information Interface Warning and Information Messages

The following messages appear only on the driver information interface. Press the

(home) button, select Warnings, then press the left

selector wheel to see the message again with the system message indicator on.

Message

Condition

Explanation

Appears when the vehicle is no longer able to run
due to a malfunction.

Immediately stop in a safe place.

Have your vehicle checked by a dealer immediately.

Appears when there is a risk that the vehicle will
move unexpectedly after you have stopped due to a
malfunction with the vehicle.

While the vehicle is stopped, apply the parking brake.

Have your vehicle checked by a dealer.

Appears when you set the power mode to ON again
and the vehicle is able to run.

2 Starting the Engine P. 465

Automatic transmission models

106

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if any door or the trunk is not completely

closed.

• Appears if any door or the trunk is opened while

driving. The beeper sounds.

• Disappears when all doors and the trunk are closed.

• Appears when the engine oil pressure is low.

Appears while driving - Immediately stop in a safe

place.

2 If the Low Oil Pressure Warning Appears P. 681

107

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if there is a problem with the shutter grille,

and the radiator coolant temperature is too high.

• Power output will be reduced, so you may not be able

to accelerate or maintain your current speed. Have your
vehicle checked by a dealer.

Appears when the washer fluid is low.

Refill the washer fluid.

2 Refilling Window Washer Fluid P. 630

Appears when the scheduled maintenance is due
soon.

Consequently, Maintenance Due Now and
Maintenance Past Due follow.

2 Maintenance Minder Messages on the Driver

Information Interface P. 609

Appears when there is a problem with the sensor on
the battery.

Have your vehicle checked by a dealer.

2 Checking the Battery P. 651

Appears along with the battery charging system
indicator when the battery is not charging.

Turn off the climate control system and rear defogger to
reduce electricity consumption.

2 If the Charging System Indicator Comes On P. 681

Models with shutter grille

Canadian models

108

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

Appears when the engine coolant temperature gets
abnormally high.

2 Overheating P. 679

Appears if the automatic brake hold is automatically
canceled while it is in operation.

Immediately depress the brake pedal.

Automatic transmission/
Continuously variable
transmission models

Manual transmission
models

109

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

Appears when the automatic brake hold system is
turned off.

2 Automatic Brake Hold P. 577

Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.

Fasten the driver’s seat belt.

2 Automatic Brake Hold P. 577

110

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.

Press the automatic brake hold button with the brake
pedal depressed.

2 Automatic Brake Hold P. 577

Appears when the parking brake is applied
automatically while it is in operation.

2 Automatic Brake Hold P. 577
2 Parking Brake P. 571

Automatic transmission/
Continuously variable
transmission models

Manual transmission
models

111

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.

Press the electric parking brake switch with the brake
pedal depressed.

2 Parking Brake P. 571

Automatic transmission/
Continuously variable
transmission models

Manual transmission
models

Была ли эта страница вам полезна?
Да!Нет
8 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности