Honda Accord (2019 year). Instruction — part 8
112
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after you set the power mode to
ACCESSORY or ON.
●
Appears after you unlock and open the driver’s
door.
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing the
ENGINE START/STOP button.
Automatic transmission/
Continuously variable
transmission models
Manual transmission
models
Canadian models
Continuously variable transmission models
for Canadian models
Manual transmission models
113
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the power mode is in ACCESSORY.
—
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Change the power mode to VEHICLE OFF.
2 ENGINE START/STOP Button P. 190
●
Appears when you close the door with the power
mode in ON without the remote inside the vehicle.
●
Disappears when you bring the remote back inside the
vehicle and close the door.
2 Remote Reminder P. 192
●
Appears when the remote battery becomes weak.
●
Replace the battery as soon as possible.
114
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if you try to start the engine when the
transmission is in
(
N and the parking brake is
disengaged.
●
Put the transmission into
(
P, then start the engine in
the normal procedure.
2 Starting the Engine P. 465
●
Appears when the parking brake is disengaged while
the power mode is in ON.
●
Set the parking brake, then start the engine in the
normal procedure.
2 Parking Brake P. 571
2 Starting the Engine P. 465
Automatic transmission
models
Continuously variable
transmission models
Automatic transmission/Continuously variable
transmission models
Manual transmission models
115
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if the remote battery is too weak to start the
engine or the key is not within operating range to
start the engine.
A beeper sounds six times.
●
Bring the remote in front of the ENGINE START/STOP
button to be touched with.
2 If the Remote Battery is Weak P. 672
●
Appears when the starter system has a problem.
●
As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal and clutch pedal (manual
transmission only), manually start the engine.
Have your vehicle checked by a dealer.
●
Appears as soon as a problem is detected in the
smart entry system
*
or push button starting system.
●
Have your vehicle checked by a dealer.
U.S.
Canada
* Not available on all models
116
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if you press the ENGINE START/STOP
button while the vehicle is moving.
• The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
• Appears if the vehicle is being driven in a manner
consistent with drowsy or inattentive driving.
117
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the temperature of the transmission
is starting to get too hot.
• The performance of the vehicle may be reduced.
• Until the message disappears, reduce your speed and
allow the system to cool down.
• Appears when you attempt to change to another
gear position with the transmission in
(
P and the
engine OFF.
• To select another gear position while in
(
P, the engine
must be ON.
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the engine. If the message disappears,
continue driving.
Automatic transmission models
118
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
• When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(
P before
releasing the brake pedal.
2 Shift Operation P. 476
• Appears when you put the transmission into
(
N,
then release the
(
N button.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 478
• Appears when car wash mode is not available due to
the transmission being too hot.
• When the transmission is too hot, car wash mode may
not be available. Let the engine idle until the
transmission has cooled down.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 478
Automatic transmission models
119
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
• Release your foot off the accelerator pedal, then select
a shift button.
• Appears when the
(
P button is pressed while the
vehicle is moving.
• Appears if you put the transmission into
(
R while
the vehicle is moving forward, or into
(
D while the
vehicle is reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
• Appears when you set the power mode to ON
without fastening the driver’s seat belt.
• Appears when you change the gear position after
(
P has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
• Fasten the seat belt properly before you start to drive.
• Appears when you try to change the gear position
without depressing the brake pedal.
• Depress the brake pedal, then select a shift button.
Automatic transmission models
120
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if you depress the accelerator pedal when
the transmission is in
(
N.
• Release the accelerator pedal. After that, depress the
brake pedal and change the transmission position.
●
Appears when the shift is repeatedly changed
between
(
P and any other position.
●
Wait for a while then change the gear position.
• Appears when you try to take the transmission out
of
(
P immediately after you start engine.
• Try to take the transmission out of
(
P again.
Automatic transmission models
121
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you press and hold
(
N button for
more than two seconds.
• Disappears when you set the gear position to a gear
other than
(
N.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 478
Message
Condition
Explanation
• Appears if you press the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P.
●
Move the shift lever to
(
P. The power mode changes to
VEHICLE OFF.
●
Move the shift lever to
(
P, then press the ENGINE
START/STOP button twice.
Automatic transmission models
Continuously variable transmission models
U.S. models
Canadian models
122
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the automatic
lighting control system.
• Appears while driving - Manually turn the lights on,
and have your vehicle checked by a dealer.
• Appears if there is a problem with the headlights.
• Appears while driving - The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
• Appears if there is a problem with the parking sensor
system.
• Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on or the
beeper does not stop even after you clean the area,
have the system checked by a dealer.
• Appears if there are obstacles around the sensors.
• Check for obstacles near your vehicle to make sure it is
safe to park.
Models with parking sensor system
Models with parking sensor system
123
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
●
Appears when ACC with LSF
*
/ACC
*
has been
automatically canceled.
●
You can resume the set speed after the condition that
caused ACC with LSF
*
/ACC
*
to cancel improves. Press
the RES/+ button.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking System
P. 510
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
* Not available on all models
124
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when ACC with LSF
*
/ACC
*
is canceled due
to excessive high vehicle speed.
●
Reduce the speed, then reset ACC with LSF
*
/ACC
*
.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
P. 535
●
Appears when the speed of the vehicle is too high for
you to set ACC with LSF
*
/ACC
*
.
●
Reduce the speed, then set ACC with LSF
*
/ACC
*
.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
P. 535
●
Appears when ACC is canceled due to excessive low
vehicle speed.
●
Raise the speed, then reset ACC.
2 Adaptive Cruise Control (ACC)
P. 535
●
Appears when the speed of the vehicle is too low for
you to set ACC.
●
Raise the speed, then set ACC.
2 Adaptive Cruise Control (ACC)
P. 535
Manual transmission models
Manual transmission models
* Not available on all models
125
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
with LSF
*
/ACC
*
is in operation.
●
ACC with LSF
*
/ACC
*
has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 519
2 Adaptive Cruise Control (ACC)
P. 535
●
Appears when pressing the SET/– button while the
distance between your vehicle and the vehicle
ahead of you is too close.
●
ACC with LSF
*
/ACC
*
cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 519
2 Adaptive Cruise Control (ACC)
P. 535
●
Appears when the parking brake is applied
automatically while ACC with LSF
*
/ACC
*
is in
operation.
●
ACC with LSF
*
/ACC
*
has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 519
2 Adaptive Cruise Control (ACC)
P. 535
●
Appears when pressing the SET/– button while the
parking brake is applied.
●
ACC with LSF
*
/ACC
*
cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
P. 519
2 Adaptive Cruise Control (ACC)
P. 535
* Not available on all models
126
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when pressing the SET/– button while the
vehicle is moving and the brake pedal is depressed.
●
ACC with LSF
*
/ACC
*
cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
P. 535
Automatic
transmission/
Continuously variable
transmission models
Manual transmission
models
* Not available on all models
127
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears just before the ACC with LSF
*
/ACC
*
is
automatically canceled when you are descending a
long hill etc (The following interval is automatically
set to extra long).
●
Appears when the ACC with LSF
*
/ACC
*
has been
automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
●
Appears when you are descending a long hill etc and
you press the RES/+ or SET/– button.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Adaptive Cruise Control (ACC)
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст