Mitsubishi Colt Ralliart. Manual — part 460
ENGINE MOUNTING
POWER PLANT MOUNT
32-5
<CVT>
AC601218
AB
68 ± 7 N·m
20 ± 5 N·m
2
N
68 ± 7 N·m
<Up to Feb.
2006 models>
68 ± 7 N·m
<From Mar.
2006 models>
68 ± 7 N·m
1
5.0 ± 1.0 N·m
3
4
5
Removal steps
>>
A
<<
1.
Earth cable connection
2.
Self-locking nut
3.
Engine mounting insulator and
dynamic damper assembly
4.
Engine mounting bracket dynamic
damper
5.
Engine mounting insulator
INSTALLATION SERVICE POINT
>>A<< EARTH CABLE CONNECTION
AC601219
<M/T>
AB
0 – 45˚
AC601220
<CVT>
AB
1. Install the earth cable in the direction shown in the
illustration.
2. Tighten the earth cable mounting bolts to the
specified torque.
Tightening torque: 5.0
± 1.0 N⋅m
Main
Index
Group
TOC
ENGINE MOUNTING
POWER PLANT MOUNT
32-6
REMOVAL AND INSTALLATION <4G1>
M1321001101346
Pre-removal Operation
Raise the engine and transmission assembly until its weight
is not applied to the insulator, and support it securely.
AC402349
AC403041
AC600365
AC600364AB
25 ± 5 N·m
68 ± 7 N·m
3
68 ± 7 N·m
4
5
2
N
N
1
68 ± 7 N·m
Removal steps
1.
Self-locking nut
2.
Engine mounting insulator and
weight assembly
3.
Self-locking nut
>>
A
<<
4.
Engine mounting weight
5.
Engine mounting insulator
INSTALLATION SERVICE POINT
>>A<< ENGINE MOUNTING WEIGHT
INSTALLATION
AC301203AC
Engine
mounting
weight
Identification
mark
CAUTION
The identification mark must face downwards.
Main
Index
Group
TOC
TRANSMISSION MOUNTING
POWER PLANT MOUNT
32-7
TRANSMISSION MOUNTING
REMOVAL AND INSTALLATION
M1321001401176
Pre-removal Operation
• Air Cleaner Assembly Removal <4A9> (Refer to GROUP
15, Air Cleaner
• Air Cleaner Assembly Removal <4G1> (Refer to GROUP
15, Air Cleaner
• Battery and Battery Tray Removal
• Line Pressure Sensor Removal <CVT> (Refer to GROUP
23A, Valve Body Assembly, Sensors
• Front Under Cover Panel Assembly Removal (Refer to
GROUP 51, Front Bumper Assembly and Radiator Grille
).
• Engine Room Side Under Cover (LH) Removal
• Front Exhaust Pipe Removal <4A9> (Refer to GROUP 15,
Exhaust Pipe and Main Muffler
• Front Exhaust Pipe Removal <4G1> (Refer to GROUP
15, Exhaust Pipe and Main Muffler
).
• Engine Roll Stopper Rod Assembly Removal (Refer to
Post-installation Operation
• Engine Roll Stopper Rod Assembly Installation (Refer to
• Front Exhaust Pipe Installation <4A9> (Refer to GROUP
15, Exhaust Pipe and Main Muffler
).
• Front Exhaust Pipe Installation <4G1> (Refer to GROUP
15, Exhaust Pipe and Main Muffler
).
• Engine Room Side Under Cover (LH) Installation
• Front Under Cover Panel Assembly Installation (Refer to
GROUP 51, Front Bumper Assembly and Radiator Grille
).
• Line Pressure Sensor Installation <CVT> (Refer to
GROUP 23A, Valve Body Assembly, Sensors
).
• Battery and Battery Tray Installation
• Air Cleaner Assembly Installation <4A9> (Refer to
GROUP 15, Air Cleaner
).
• Air Cleaner Assembly Installation <4G1> (Refer to
GROUP 15, Air Cleaner
).
<4A9-M/T>
AC601222
43 ± 4 N·m
43 ± 4 N·m
45 ± 10 N·m
11 ± 1 N·m
24 ± 4 N·m
1
2
3
4
N
AB
N
23 ± 3 N·m
23 ± 2 N·m
N
Main
Index
Group
TOC
Removal steps
<<
A
>>
1.
Gearshift cable and select cable
connection
2.
Control wiring harness connection
<<
B
>>
3.
Clutch release cylinder assembly
•
Raise the engine and transmission
assembly until its weight is not
applied to the transmission
mounting insulator, and support it
securely.
4.
Transmission mounting insulator
TRANSMISSION MOUNTING
POWER PLANT MOUNT
32-8
<4A9-CVT>
AC206585AC
1
12 ± 2 N·m
2
3
4
4
5
6
7
8
9
12 ± 2 N·m
63 ± 7 N·m
45 ± 10 N·m
Removal steps (Continued)
Removal steps
1.
CVT solenoid valve connector
2.
Inhibitor switch connector
3.
Speed sensor connector
4.
Oil pressure sensor connector
5.
Transmission control cable
connection
6.
Battery earth connection
7.
Bracket
8.
Control cable support bracket
Removal steps (Continued)
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст