Mitsubishi Outlander (2003+). Manual — part 257
REAR SUSPENSION CROSSMEMBER
REAR SUSPENSION
34-25
REAR SUSPENSION CROSSMEMBER
REMOVAL AND INSTALLATION
M1341006800219
INSPECTION
M1341006900067
•
Check the crossmember for cracks or
deformation.
•
Check all bolts for condition and straightness.
Pre-removal Operation
•
Main Muffler, Centre Exhaust Pipe Removal (Refer to
GROUP 15, Exhaust pipe and Main Muffler
•
Control Link, Upper Arm, Lower Arm Removal (Refer to
).
•
Stabilizer Bar Removal (Refer to
•
Fuel Filler Neck Protector Removal (Refer to GROUP
).
Post-installation Operation
•
Fuel Filler Neck Protector Installation (Refer to GROUP
).
•
Stabilizer Bar Installation (Refer to
•
Control Link, Upper Arm, Lower Arm Installation (Refer to
).
•
Main Muffler, Centre Exhaust Pipe Installation (Refer to
GROUP 15, Exhaust pipe and Main Muffler
•
Rear Wheel Alignment Check and Adjustment (Refer to
).
AC107129
44 ± 9 N·m
1
2
3
4
5
N
AB
90 ± 10 N·m
90 ± 10 N·m
95 ± 15 N·m
N
Removal steps
1.
Dynamic damper <4WD>
2.
Differential support arm connecting
bolt <4WD>
3.
Rear suspension crossmember
4.
Differential support arm <4WD>
5.
Plug
NOTES
35A-1
GROUP 35A
BASIC BRAKE
SYSTEM
CONTENTS
GENERAL INFORMATION . . . . . . . .
SERVICE SPECIFICATIONS. . . . . . .
LUBRICANTS . . . . . . . . . . . . . . . . . .
SEALANT. . . . . . . . . . . . . . . . . . . . . .
SPECIAL TOOLS. . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE. . . . . . . . . . .
BRAKE PEDAL CHECK AND
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . .
BRAKE BOOSTER OPERATING TEST . . .
CHECK VALVE OPERATION CHECK . . . .
BLEEDING . . . . . . . . . . . . . . . . . . . . . . . . .
BRAKE FLUID LEVEL SENSOR CHECK. .
DISC BRAKE PAD CHECK AND
REPLACEMENT . . . . . . . . . . . . . . . . . . . . .
DISC BRAKE ROTOR CHECK. . . . . . . . . .
BRAKE PEDAL. . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
MASTER CYLINDER ASSEMBLY
AND BRAKE BOOSTER . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
MASTER CYLINDER . . . . . . . . . . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
FRONT DISC BRAKE ASSEMBLY . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
DISASSEMBLY AND REASSEMBLY . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
REAR DISC BRAKE ASSEMBLY . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
DISASSEMBLY AND REASSEMBLY . . . . .
GENERAL INFORMATION
BASIC BRAKE SYSTEM
35A-2
GENERAL INFORMATION
M1351000100406
The brake system offers high dependability and
durability along with improved braking performance
and brake sensitivity.
CONFIGURATION DIAGRAM
SPECIFICATIONS
AC300584
Brake booster
Master cylinder
Front disc brake
Parking brake
Rear disc brake
AC
Hydraulic unit
(Integrated with ABS-ECU)
Item
Specification
Master cylinder
Type
Tandem type
I.D. mm
25.4
Brake booster
Type
Vacuum type, tandem
Effective dia. of power cylinder mm
205 + 230
Boosting ratio
7.5
Rear wheel hydraulic control method
Electronic brake-force distribution (EBD)
Front brakes
Type
Floating caliper, 2 piston, ventilated disc
Disc effective diameter
×
thickness mm 246
×
24
Wheel cylinder I.D. mm
42.9
Clearance adjustment
Automatic
Rear disc brakes
Type
Floating caliper, 1 piston, solid disc
Disc effective dia.
×
thickness mm
226
×
10
Wheel cylinder I.D. mm
38.1
Clearance adjustment
Automatic
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст