Mitsubishi Outlander (2003+). Manual — part 131
AIR CLEANER
INTAKE AND EXHAUST
15-3
AIR CLEANER
REMOVAL AND INSTALLATION <4G63>
M1151002100550
CAUTION
Parts marked by * are made of recycled-paper mixed plastic material, so observe the following
precautions.
•
Avoid any shock or load to these parts when removing and installing them.
•
When installing, securely set the air cleaner cover and the resonator clamp to the air cleaner body.
NOTE: Parts marked by * are made of recycled-paper mixed plastic material. Dispose of according to state
and local laws
AC203703
3.9 ± 1.0 N·m
3.9 ± 1.0 N·m
3*
2*
4*
5
11
6
7
1*
8
9
12
10*
13
N
11 ± 1 N·m
8.8 ± 1.0 N·m
8.8 ± 1.0 N·m
8.8 ± 1.0 N·m
AB
22 ± 4 N·m
Clamp
Removal steps
1. Resonator
2. Air cleaner element
3. Air duct
4. Air cleaner body
5. Air flow sensor connector
6. Breather hose connection
7. Air cleaner cover and air flow sensor
assembly
8. Air flow sensor assembly
9. Gasket
10. Air cleaner cover
11. Resonator
12. Air intake hose
13. Air cleaner bracket
Removal steps (Continued)
AIR CLEANER
INTAKE AND EXHAUST
15-4
REMOVAL AND INSTALLATION <4G69>
M1151002100561
CAUTION
Parts marked by * are made of recycled-paper mixed plastic material, so observe the following
precautions.
•
Avoid any shock or load to these parts when removing and installing them.
•
When installing, securely set the air cleaner cover and the resonator clamp to the air cleaner body.
NOTE: Parts marked by * are made of recycled-paper mixed plastic material. Dispose of according to state
and local laws
AC304211
3.0 ± 0.5 N·m
3.0 ± 0.5 N·m
3.9 ± 1.0 N·m
3.9 ± 1.0 N·m
4.0 ± 1.0 N·m
1.6 ± 0.6 N·m
8.8 ± 1.0 N·m
8.8 ± 1.0 N·m
11 ± 1 N·m
22 ± 4 N·m
1*
2*
3
4*
11
5
7
8*
10
6
9
AC
Clamp
Removal steps
1. Resonator
2. Air cleaner element
3. Air duct
4. Air cleaner body
5. Air flow sensor connector
6. Breather hose connection
7. Air flow sensor assembly
8. Air cleaner cover
9. Resonator
10. Air intake hose
11. Air cleaner bracket
Removal steps (Continued)
INTAKE MANIFOLD
INTAKE AND EXHAUST
15-5
INTAKE MANIFOLD
REMOVAL AND INSTALLATION <4G63>
M1151003000879
Pre-removal Operation
•
Fuel Line Pressure Reduction [Refer to GROUP 13A,
On-vehicle Service
−
Fuel Pump Connector
Disconnection (How to Reduce Pressurized Fuel Lines)
.]
•
Throttle Body Removal (Refer to GROUP 13A, Throttle
).
•
Fuel Delivery Pipe and Fuel Injector assembly Removal
(Refer to GROUP 13A, Injector
Post-installation Operation
•
Fuel Delivery Pipe and Fuel Injector assembly Installation
(Refer to GROUP 13A, Injector
).
•
Throttle Body Installation (Refer to GROUP 13A, Throttle
Body
•
Accelerator Cable Adjustment (Refer to GROUP 17,
On-vehicle Service
−
Accelerator Cable Check and
Adjustment
•
Fuel Leak Check
AC301313
2
N
1
3
5
4
13 ± 1 N·m
11 ± 1 N·m
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
6
8
7
9
10
AB
(Engine oil)
Removal steps
1.
Purge control solenoid valve
connector
2.
EGR control solenoid valve
connector
3.
Detonation sensor connector
4.
Accelerator cable connection
5.
Earth cable connection
6.
Emission control equipment hose
7.
PCV hose
8.
Oil level gauge and guide
9.
O-ring
10. Detonation sensor connector clamp
Removal steps (Continued)
INTAKE MANIFOLD
INTAKE AND EXHAUST
15-6
AC301314
9.0 ± 1.0 N·m
11 ± 1 N·m
20 ± 2 N·m
31 ± 3 N·m
36 ± 6 N·m
20 ± 2 N·m
20 ± 2 N·m
36 ± 6 N·m
36 ± 6 N·m
17
15
16
14
11
N
13
12
N
AB
Removal steps
11. Vacuum hose and pipe assembly
12. EGR valve
13. EGR valve gasket
14. Brake booster vacuum hose
connection
15. Intake manifold stay
16. Intake manifold assembly
17. Intake manifold gasket
Removal steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст