Mitsubishi Outlander (2003+). Manual — part 284
PARKING BRAKE CABLE
PARKING BRAKES
36-9
INSTALLATION SERVICE POINT
>>A<< TENSION SPRING INSTALLATION
Apply grease to the mating surface of the tension
spring and pedal, and then install the spring as
shown.
PARKING BRAKE CABLE
REMOVAL AND INSTALLATION <L.H.
drive vehicles>
M1361001900581
AC300123AB
Pre-removal Operation
•
Rear Floor Console Assembly Removal (Refer to GROUP
52A, Floor Console
Post-installation Operation
•
Parking Brake Lever Stroke adjustment (Refer to
•
Rear Floor Console Assembly Installation (Refer to
GROUP 52A, Floor Console Assembly
).
AC202586AD
5
3
6
2
4
1
Removal steps
•
Shoe and lining assembly (Refer to
).
•
Loosen the adjusting nuts.
•
Turn up the driver's side carpet.
1.
Parking brake cable connection
2.
Clip
3.
Protector B
4.
Parking brake cable connection
5.
Protector C
6.
Rear parking brake cable assembly
Removal steps (Continued)
PARKING BRAKE CABLE
PARKING BRAKES
36-10
REMOVAL AND INSTALLATION
<R.H. drive vehicles>
M1361001900592
<Front>
Pre-removal Operation
•
Front scuff plate, rear scuff plate, cowl side trim, lower
center pillar trim removal (Refer to GROUP 52A, Trims
•
Front seat assembly removal <driver's side> (Refer to
GROUP 52A, Front Seat Assembly
•
Rear seat cushion removal (Refer to GROUP 52A, Rear
•
Seat belt lower anchor bolt removal (Refer to GROUP
52A, Seat Belt
).
•
Floor Console Assembly Removal (Refer to GROUP 52A,
Floor Console
•
Center console panel and center console removal (Refer
to GROUP 52A, Instrument Panel Assembly
•
Foot duct <driver’s side> removal (Refer to GROUP 55A,
Heater Unit, Heater Core, Blower Assembly and
Evaporator Unit
).
•
Accelerator pedal stopper removal (Refer to GROUP 17,
Accelerator Cable and Pedal
<2000>,
<2400>).
Post-installation Operation
•
Accelerator pedal stopper installation (Refer to GROUP
17, Accelerator Cable and Pedal
<2000>,
<2400>).
•
Foot duct <driver’s side> installation (Refer to GROUP
55A, Heater Unit, Heater Core, Blower Assembly and
Evaporator Unit
).
•
Center console panel and center console installation
(Refer to GROUP 52A, Instrument Panel Assembly
).
•
Floor Console Assembly Installation (Refer to GROUP
52A, Floor Console
•
Seat belt lower anchor bolt removal (Refer to GROUP
52A, Seat Belt
•
Rear seat cushion removal (Refer to GROUP 52A, Rear
Seat
).
•
Front seat assembly removal <driver's side> (Refer to
GROUP 52A, Front Seat Assembly
•
Front scuff plate, rear scuff plate, cowl side trim, lower
center pillar trim removal (Refer to GROUP 52A, Trims
•
Parking Brake pedal Stroke adjustment (Refer to
AC102716AD
1
2
3
4
Removal steps
•
Turn up the driver's side carpet.
1.
Adjusting nut
2.
Nut holder
3.
Equalizer
4.
Front parking brake cable assembly
Removal steps (Continued)
PARKING BRAKE CABLE
PARKING BRAKES
36-11
<Rear>
Pre-removal Operation
•
Front scuff plate, rear scuff plate, cowl side trim, lower
center pillar trim removal (Refer to GROUP 52A, Trims
•
Front seat assembly removal <driver's side> (Refer to
GROUP 52A, Front Seat Assembly
•
Rear seat cushion removal (Refer to GROUP 52A, Rear
•
Seat belt lower anchor bolt removal (Refer to GROUP
52A, Seat Belt
).
•
Floor Console Assembly Removal (Refer to GROUP 52A,
Floor Console Assembly
).
•
Center console panel and center console removal (Refer
to GROUP 52A, Instrument Panel Assembly
Post-installation Operation
•
Center console panel and center console installation
(Refer to GROUP 52A, Instrument Panel Assembly
).
•
Floor Console Assembly Installation (Refer to GROUP
52A, Floor Console Assembly
).
•
Seat belt lower anchor bolt removal (Refer to GROUP
52A, Seat Belt
•
Rear seat cushion removal (Refer to GROUP 52A, Rear
•
Front seat assembly removal <driver's side> (Refer to
GROUP 52A, Front Seat Assembly
•
Front scuff plate, rear scuff plate, cowl side trim, lower
center pillar trim removal (Refer to GROUP 52A, Trims
•
Parking Brake pedal Stroke adjustment (Refer to
AC202586AD
5
3
6
2
4
1
Removal steps
•
Shoe and lining assembly (Refer to
).
•
Loosen the adjusting nuts.
•
Turn up the driver's side carpet.
1.
Parking brake cable connection
2.
Clip
3.
Protector B
4.
Parking brake cable connection
5.
Protector C
6.
Rear parking brake cable assembly
Removal steps (Continued)
PARKING BRAKE LINING AND DRUM
PARKING BRAKES
36-12
PARKING BRAKE LINING AND DRUM
REMOVAL AND INSTALLATION
M1361002500359
Post-installation Operation
•
Parking Brake Lever Stroke Check and Adjustment (Refer
to
).
•
Lining Running-in (Refer to
).
•
Floor Console Installation (Refer to GROUP 52A, Floor
Console Assembly
).
AC300145
13
60 ± 5 N·m
63 ± 7 N·m
AB
13
4
15
5
3
8
9
7
2
1
6
10
11
12
13
13
14
16
16
7
Brake grease: Multipurpose grease
Removal
steps
<<A>>
1. Rear brake caliper assembly
2. Rear brake disc
>>B<<
3.
Shoe-to-anchor spring
>>B<<
4.
Shoe-to-anchor spring
5. Shoe guide plate
6. Adjusting wheel spring
>>A<<
7. Adjuster
assembly
8. Strut
9. Strut-to-shoe
spring
10. Shoe hold-down cup
11. Shoe
hold-down
spring
12. Shoe hold-down pin
13. Shoe and lining assembly
14. Clip
15. Rear hub assembly (For 2WD, refer
to GROUP 27A, Rear Hub
Assembly
. For 4WD, refer
to GROUP 27B, Rear Hub
Assembly
16. Backing plate
Removal steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст