Mitsubishi Outlander (2003+). Manual — part 347
HEADLINING
INTERIOR
52A-27
HEADLINING
REMOVAL AND INSTALLATION
M1521001400304
REMOVAL SERVICE POINT
<<A>> SUN VISOR HOLDER REMOVAL
Insert the special tool ornament remover
(MB990784) into side claws of the sun visor holder
through the both sides to remove the hinges.
Pre-removal and Post-installation Operation
•
Removal and Installation of Front Pillar Trim, Centre Pillar
Trim Upper, Quarter Trim Upper (Refer to
AC301290
1
2
3
4
5
5
6
6
7
8
9
AB
Removal steps
1.
Assist grip
2.
Rear room lamp assembly
3.
Front room lamp/map lamp
assembly
4.
Sun roof switch cover <Vehicles
with sun roof>
<<A>>
5.
Sun visor holder
6.
Sun visor assembly
7.
Front headlining trim <Vehicles with
sun roof>
8.
Rear headlining trim <Vehicles with
sun roof>
9.
Headlining
AC005512
MB990784
Sun visor holder
MB990784
AD
INSIDE REAR VIEW MIRROR
INTERIOR
52A-28
INSIDE REAR VIEW MIRROR
M1521002600185
REMOVAL SERVICE POINTS
1. Disengage the claw A and lower the cover toward
arrow 1 direction.
2. Push the claw B toward arrow 2 direction to
unlock, and pull out the mirror toward arrow 3
direction.
AC209066
Claw B
Claw A
Cover
1
2
3
AD
FRONT SEAT ASSEMBLY
INTERIOR
52A-29
FRONT SEAT ASSEMBLY
REMOVAL AND INSTALLATION
M1522001300407
<L.H. DRIVE VEHICLES>
CAUTION
For the removal of the front seat assembly on vehicles with the side air bags, refer to GROUP 52B,
Service Precautions
and Air Bag Module and Clock Spring
Pre-removal and Post-installation Operation
Removal and Installation of Rear Floor Console Assembly
(Refer to
AC301693
NOTE
: Claw position
Section A – A
Section B – B
Claw
Claw
8
4, 5
3
8
2
3
4
5
5
4
7
3
3
1
1
8
8
44 ± 10 N·m
44 ± 10 N·m
30 ± 5 N·m
30 ± 5 N·m
A
A
B
B
AC
6
6
1.
Headrest
2.
Heated seat switch <Vehicles with
heated seat>
Front seat assembly removal
steps
3.
Front seat anchor cover
4.
Seat anchor cover outer
5.
Seat anchor cover inner
6.
Harness connector <Vehicles with
side-air bag>
7.
Harness connector <Vehicles with
heated seat>
>>A<<
8.
Front seat assembly
Front seat assembly removal
steps (Continued)
FRONT SEAT ASSEMBLY
INTERIOR
52A-30
<R.H. DRIVE VEHICLES>
CAUTION
For the removal of the front seat assembly on vehicles with the side air bags, refer to GROUP 52B,
Service Precautions (Refer to
) and Air Bag Module and Clock Spring (Refer to
).
Pre-removal and Post-installation Operation
Removal and Installation of Floor Console Assembly (Refer
to
AC309222 AB
1
1
6
6
2
2
2
3
4
4
5
3
30 ± 5 N·m
44 ± 10 N·m
30 ± 5 N·m
44 ± 10 N·m
Section
A – A
Section
B – B
Claw
3, 4
6
2
6
A
A
B
B
Claw
NOTE
: Claw Position
5
1.
Head restraint
Front seat assembly removal
steps
2.
Front seat anchor cover
3.
Seat anchor cover outer
4.
Seat anchor cover inner
5.
Harness connector <Vehicles with
side-air bag>
>>A<<
6.
Front seat assembly
Front seat assembly removal
steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст