Mitsubishi Outlander (2003+). Manual — part 462
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-137
POWER WINDOW
SUB SWITCH
(FRONT: LH)
POWER
WINDOW MOTOR
POWER
WINDOW MAIN
SWITCH
(FRONT: RH)
POWER
WINDOW MOTOR
(FRONT: LH)
HALL IC
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
CPU
HALL IC
HALL IC
HALL IC
Power Window (front) Circuit <RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-138
COMMENTS ON TROUBLE SYMPTOM
The revolution detection sensor, which is
incorporated in the power window motor, may be
defective.
POSSIBLE CAUSES
•
Malfunction of the power window motor
DIAGNOSIS PROCEDURE
Step 1. Check the power window operating
current.
Check that the power window operating current is
normal (Refer to GROUP 42
−
Door
−
On-vehicle
Service
).
Q: Is the check result normal?
YES :
Adjust the door window glass (Refer to
GROUP 42
−
Door
−
On-vehicle service
), and then go to Step 2.
NO :
Replace the defective power window motor
assembly which operating current are
abnormal.
POWER WINDOW
SUB SWITCH
POWER
WINDOW MOTOR
(REAR: RH)
POWER WINDOW
SUB SWITCH
(REAR: LH)
(REAR: LH)
POWER
WINDOW MOTOR
(REAR: RH)
HALL IC
HALL IC
HALL IC
HALL IC
CPU
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Power Window (rear) Circuit
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-139
Step 2. Confirm the power window learning
function.
Check that the power window switch has learned the
fully closed position of the windows (Refer to
GROUP 42
−
Door
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Make the power window switch learn the
fully closed position of the windows (Refer
to GROUP 42
−
Door
).
Step 3. Determine a trouble spot.
Q: Which door does the power window anti-trap
function fail on?
Driver's door :
Go to Step 4.
Front passenger's door :
Go to Step 7.
Rear right door :
Go to Step 13.
Rear left door :
Go to Step 19.
Step 4. Connector check: E-05 power window
main switch connector and E-13 power window
motor (front LH) connector <L.H. drive vehicles>
or E-23 power window motor (front LH)
connector <R.H. drive vehicles>
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the defective connector.
AC308792
Connectors: E-05, E-13
<LHD>
E-05
Harness side
E-13
Harness side
E-05
E-13(GR)
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AB
4
6 5
3 2 1
AC308798
Connectors: E-05, E-23
<RHD>
E-05
Harness side
E-23
Harness side
E-05
E-23(GR)
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AD
4
6 5
3 2 1
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-140
Step 5. Check the wiring harness from E-05
power window main switch connector terminal
Nos. 8, 9, 10 and 12 to E-13 power window motor
(front LH) connector terminal Nos. 5, 4, 6 and 2
<L.H. drive vehicles> or E-23 power window
motor (front RH) connector terminal Nos. 5, 6, 4
and 2 <R.H. drive vehicles>.
NOTE: Prior to the wiring harness inspection, check
intermediate connector E-12 <L.H. drive vehicles> or
E-32 <R.H. drive vehicles>, and repair if necessary.
•
Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the wiring harness.
Step 6. Retest the system.
After the power window main switch is replaced,
check that the driver's power window anti-trap
function works.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
−
How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor assembly
(front LH).
Step 7. Connector check: E-23 power window
motor (front RH) connector <L.H. drive vehicles>
or E-13 power window motor (front LH)
connector <R.H. drive vehicles>
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
AC308792
Connectors: E-05, E-12, E-13
<LHD>
E-05
Harness side
E-13
Harness side
E-05
E-13(GR)
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AD
4
6 5
3 2 1
E-12
E-12
AC308798
Connectors: E-05, E-23, E-32
<RHD>
E-05
Harness side
E-23
Harness side
E-05
E-23(GR)
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AE
4
6 5
3 2 1
E-32
E-32
AC308793
Connector: E-23
<LHD>
AG
Harness side
E-23(GR)
4
6 5
3 2 1
AC308805
Connector: E-13
<RHD>
AG
Harness side
E-13(GR)
4
6 5
3 2 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст