Mitsubishi Grandis. Manual — part 218
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-334
Step 9. Connector check: F-13 door mirror
assembly (RH) or F-07 door mirror assembly (LH)
connector.
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Repair the defective connector.
Step 10. Resistance measurement at the F-13
door mirror assembly (RH) or F-07 door mirror
assembly (LH) connector.
(1) Disconnect the connector, and measure at the
AC311150
AD
Connector: F-07
Harness side
<LHD>
AC310211
AF
Connector: F-07 <RHD>
Harness side
AC311147
AF
Connector: F-13 <LHD>
Harness side
AC310213
AE
Connector: F-13 <RHD>
Harness side
AC311150
AD
Connector: F-07
Harness side
<LHD>
AC310211
AF
Connector: F-07 <RHD>
Harness side
AC311147
AF
Connector: F-13 <LHD>
Harness side
AC310213
AE
Connector: F-13 <RHD>
Harness side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-335
wiring harness side.
(2) Resistance measurement between the defective
lamp connector terminal and body earth.
• Resistance between F-13 door mirror
assembly (RH) connector terminal No.2 and
body earth
• Resistance between F-07 door mirror
assembly (LH) connector terminal No.2 and
body earth
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Repair the wiring harness in the door mirror
assembly.
NO :
Go to Step 11.
AC310507CA
Connectors F-07, F-13
(Harness side)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-336
Step 11. Check the wiring harness from F-13 door
mirror assembly (RH) or F-07 door mirror
assembly (LH) connector terminal No.2 and body
earth.
NOTE:
AC311150
AD
Connector: F-07
Harness side
<LHD>
AC310211
AF
Connector: F-07 <RHD>
Harness side
AC311147
AF
Connector: F-13 <LHD>
Harness side
AC310213
AE
Connector: F-13 <RHD>
Harness side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-337
Prior to the wiring harness inspection, check
intermediate connector C-14 <side turn-signal lamp
(RH)>, C-27 <side turn-signal lamp (LH)> and
junction block connector C-205, and repair if
necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
Step 12. Connector check: G-09 rear turn-signal
lamp (RH) or G-25 rear turn-signal lamp (LH)
connector.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the defective connector.
AC310615
AB
Connector: C-14 <LHD>
AC310631
Connector: C-14 <RHD>
AG
AC310613
Connector: C-27 <LHD>
AJ
AC310628AN
Connector: C-27 <RHD>
AC310623
Connector: C-205 <LHD>
AM
Harness side
Junction block (Front view)
AC310618
Connectors: C-203 <RHD>
AK
Harness side
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Junction block (Front view)
AC310222
Connector: G-09
AG
Harness side
G-09 (B)
AC310220
Connector: G-25
AF
G-25 (B)
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст