Mitsubishi Grandis. Manual — part 217
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-330
lamp connector terminal and body earth.
•
Resistance between A-33 front turn-signal lamp
(RH) connector terminal No.1 and body earth
• Resistance between A-23 front turn-signal
lamp (LH) connector terminal No.1 and body
earth
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 16.
NO :
Go to Step 5.
Step 5. Connector check: A-40 earth connector
<front turn-signal lamp (RH)> and A-25 earth
connector <front turn-signal lamp (LH)>.
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the connector.
AC310506BO
Connectors A-23, A-33
(Harness side)
AC310403
A-25 (GR)
AE
Connector: A-25 <LHD>
Harness side
AC310398
A-25 (GR)
AE
Connector: A-25 <RHD>
Harness side
AC310401
Connector: A-40 <LHD>
Harness side
AE
A-40 (GR)
AC310396
Connector: A-40 <RHD>
Harness side
AE
A-40 (GR)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-331
Step 6. Check the wiring harness from A-33 front
turn-signal lamp (RH) connector terminal No.1
and A-40 earth connector terminal No.3 or A-23
front turn-signal lamp (LH) connector terminal
No.1 and A-25 earth connector terminal No.6.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-332
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310404
AD
Connectors: A-23, A-25
A-23 (B)
A-23
Harness side
A-25 (GR)
A-25
Harness side
<LHD>
AC310399
AD
Connectors: A-23, A-25
A-23 (B)
A-23
Harness side
A-25 (GR)
A-25
Harness side
<RHD>
AC310402
AD
Connectors: A-33, A-40
A-33 (B)
A-33
Harness side
A-40 (GR)
A-40
Harness side
<LHD>
AC310397
AD
Connectors: A-33, A-40
A-33 (B)
A-33
Harness side
A-40 (GR)
A-40
Harness side
<RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-333
Step 7. Connector check: F-13-6 side turn-signal
lamp (RH) or F-07-6 side turn-signal lamp (LH)
connector.
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
Step 8. Resistance measurement at the F-13-6
side turn-signal lamp (RH) or F-07-6 side
turn-signal lamp (LH) connector.
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Resistance measurement between the defective
lamp connector terminal and body earth.
•
Resistance between F-13-6 side turn-signal lamp
(RH) connector terminal No.2 and body earth
• Resistance between F-07-6 side turn-signal
lamp (LH) connector terminal No.2 and body
earth
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 19.
NO :
Go to Step 9.
AC303049AF
Connector:
F-07-6
Harness side
1
2
AC303050AC
Connector:
F-13-6
Harness side
1
2
AC303049AF
Connector:
F-07-6
Harness side
1
2
AC303050AC
Connector:
F-13-6
Harness side
1
2
AC310506BQ
Connectors F-07-6, F-13-6
(Harness side)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст