Mitsubishi Grandis. Manual — part 130
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-517
Step 4. Check the wiring harness between E-02
interior lamp connector terminal No.5 and body
earth
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-518
NOTE: Prior to the wiring harness inspection, check
intermediate connector E-11, and repair if necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310650
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles without
sunroof-LHD>
AC310654
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles without
sunroof-RHD>
AC310652
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles with
sunroof-LHD>
AC310656
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles with
sunroof-RHD>
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-519
Step 5. Connector check: C-221 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the defective connector.
AC312037
Connector: C-221 <LHD>
Junction block (Rear view)
AD
Harness side
AC312047
Connector: C-221 <RHD>
Junction block (Rear view)
AD
Harness side
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-520
Step 6. Check the wiring harness from E-02
interior lamp connector terminal Nos.6 and 7 to
C-221 ETACS-ECU connector terminal Nos.53
and 63.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст