Mitsubishi Grandis. Manual — part 5

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-17

ELECTRIC RETRACTABLE REMOTE
CONTROLLED MIRROR
Electric retractable remote controlled
mirror timer function

When the unfolding/folding switch on the remote
controlled mirror switch is turned ON with the ignition
switch at the ACC or ON position, the retraction
mirror relay is turned on for 16 seconds
(unfolding/folding) to unfold or fold the door mirrors.
Even after the ignition switch is turned OFF, the door
mirrors remain operable for 30 seconds.
If the unfolding/folding switch on the remote
controlled mirror switch is turned ON while one of the
retraction mirror relay is in operation (unfolding or
folding), the other relay for the opposite motion is
turned ON after 0.1 second.

NOTE: Whether the door mirrors are at the unfolding
or folding position is determined according to the
memory of the retraction mirror relay operated
previously. For this reason, if the mirrors are
manually retracted, they may not move when the
unfolding/folding switch is pressed next time.

AUTOMATIC UNFOLDING FUNCTION

When the vehicle speed reaches 30 km/h, with the
ignition switch ON and the mirrors retracted,
ETACS-ECU turns on the retraction mirror relay
(unfolding) for 16 seconds to return the door mirrors.
However, the door mirrors do not return to their
normal positions automatically if the ignition switch is
turned from OFF to ON, and then the
unfolding/folding switch on the remote controlled

mirror switch is operated.
NOTE: Whether the door mirrors are at the unfolding
or folding position is determined according to the
memory of the retraction mirror relay operated
previously. For this reason, if the mirrors are
manually retracted, they may not move when the
unfolding/folding switch is pressed next time.

AC309810

Ignition switch
(ACC)

AB

t: 0.1 second
T1: 30 seconds
T2: 16 seconds

ON

OFF

T2

T2

T2

T2

T2

T2

t

t

t

T1

T1

OFF

ON

OFF

ON

Remote controlled
mirror switch

OFF

ON

Electric retractable remote
controlled mirror
(Unfolding)

Electric retractable remote
controlled mirror
(Folding)

AC207002AC

ON

OFF

ON

OFF

ON

OFF

ON

OFF

T : 16 seconds

T

T

Ignition switch
(IG)

30 km/h

0 km/h

Unfolding

Folding

Vehicle speed

Remote controlled mirror switch
(folding/unfolding switch)

Door mirror position

Electric retractable remote
controlled mirror (Folding)

Electric retractable remote
controlled mirror (Unfolding)

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-18

HEADLAMP
Headlamp automatic-shutdown function
(the initial condition: with function)

Even when the lighting switch (tail lamp switch or
headlamp switch) is ON, the headlamp (including the
tail lamps) turns off automatically with any of the
following conditions to prevent the battery discharge
caused by unattended operation.

• If the ignition switch is turned OFF with the

lighting switch ON, the lamp turns off
automatically after 3 minutes. If the driver's door
is opened during the 3 minutes, the lamp turns off
after one second (One second before turning off,
the lamp remainder buzzer sounds. However, if
the driver's door is opened with the ignition key
inserted, the key remainder alarm buzzer
operates in the first priority).

• When the lighting switch is turned to the

headlamp position (the headlamp switch is ON)
from OFF with the ignition switch OFF, the
headlamps and the tail lamps turn off 3 minutes
after getting off (open/close of the driver's door).

• If the lighting switch is turned to the tail lamp

position from OFF with the ignition switch OFF,
the lamps do not turn off automatically.

NOTE: The auto-turn off can be made by the

customize function.

After the headlamp automatic-shutdown function,
when the lighting switch is turned OFF and then ON
or, the ignition switch is turned ON, the headlamp
turns on again.

HIGH-BEAM INDICATOR

The ETACS-ECU outputs the high beam indicator
ON signal to the combination meter through CAN
communication in synchronization with the high
beam headlamp operation. The combination meter
receives the transmitted signal and turns ON or OFF
the high beam indicator.

AC311847AB

1 second

3 minutes

3 minutes

(Closed) OFF

(Open) ON

ON

OFF

ON

OFF

Tail lamp

Headlamp

OFF

ON

OFF

Driver's

door switch

Lighting switch

Headlamp output

Tail lamp output

Ignition switch (IG)

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-19

Daytime running light function

The front-ECU illuminates the low-beam headlamps
when the ignition switch is turned "ON" with the
headlamp switch is at the "OFF" or "TAIL" position. It
illuminates the low-beam headlamps at a normal
brightness when the headlamps are turned on with
the daytime running light on.

FLASHER TIMER FUNCTION
TURN-SIGNAL LAMP <INITIAL SETTING:
TURN SIGNAL LAMP CAN BE OPERATED
WHEN THE IGNITION SWITCH IS IN THE
ON POSITION>

When the turn-signal lamp switch is ON (LH or RH)
with the ignition switch is ON, the turn-signal lamp
output (flash signal) is turned ON.
If the lamp bulb of the front or rear turn-signal lamp
has burned out, the flashing speed becomes faster to
alert the driver that the lamp bulb has burned out.
NOTE: Using a customize function, this function
becomes available even when the ignition switch is
in the ACC position. For more information about the
customisation feature.

HAZARD WARNING LAMP

When the hazard lamp switch input signal turning
from OFF to ON is detected, the flashing states turns
over by the signal (When the hazard lamp is not
blinking, it blinks. If it is blinking, it turns off).
NOTE:

.

1. The push-return switch is adopted for the hazard

lamp switch.

2. Even if the lamp bulb has burned out, the flashing

speed of the hazard lamp is not changed.

TURN-SIGNAL LAMP INDICATOR

The ETACS-ECU outputs the turn-signal lamp
indicator ON signal to the combination meter through
CAN communication in synchronization with the
turn-signal lamp operation. The combination meter
receives the transmitted signal and turns ON or OFF
the turn-signal lamp indicator.

AC311848

Passing / Dimmer

switch

Headlamp switch

ON

OFF

HEAD

OFF or TAIL

Ignition switch

(IG2)

ON

OFF

Headlamp

High-beam

Low-beam

OFF

AB

AC101508

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

Ignition
switch (IG)

Turn signal lamp
switch RH

Turn signal lamp
switch LH

Turn signal lamp
output RH

Turn signal lamp
output LH

AC

AC101509

ON

OFF

ON

OFF

ON

OFF

Hazard lamp
switch

Turn signal
lamp output
RH

Turn signal
lamp output
LH

AC

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-20

FOG LAMP
Front fog lamp control

When the fog lamp switch is turned to ON with the
tail lamp or the headlamp lit (the tail lamp switch or
the headlamp switch is ON), the fog lamp relay turns
ON, and the fog lamps turn on.
If the tail lamp or the headlamp is turned off with the
lighting switch OFF while the fog lamps lit, the fog
lamps turn off the same time to prevent unattended
operation.
If the tail lamp is turned off by the headlamp
automatic-shutdown function, the fog lamps turn off
at the same time. However, if the tail lamps turn on
again, the fog lamps do not.

FRONT FOG LAMP INDICATOR

The ETACS-ECU outputs the front fog lamp indicator
ON signal to the combination meter through CAN
communication in synchronization with the front fog
lamp operation. The combination meter receives the
transmitted signal and turns ON or OFF the front fog
lamp indicator.

Rear fog lamp control

If the rear fog lamp switch is turned ON when the
headlamp or the front fog lamp is turned ON, the rear
fog lamp is switched ON and OFF alternatively.
If the headlamp and the front fog lamp are turned
OFF, the rear fog lamp is turned OFF at the same
time.

REAR FOG LAMP INDICATOR

The ETACS-ECU outputs the rear fog lamp indicator
ON signal to the combination meter through CAN
communication in synchronization with the rear fog
lamp operation. The combination meter receives the
transmitted signal and turns ON or OFF the fog lamp
indicator.

AC212278 AF

OFF

ON

(Illuminated) OFF

(Switched off) ON

Tail lamp

Headlamp

OFF

Front fog lamp switch

Lighting switch

Headlamp automatic shutdown
output

(Extinguished) OFF

(Illuminated) ON

Fog lamp output

AC212279

ON

OFF

ON

OFF

Rear fog lamp switch

Rear fog lamps

AB

Tail lamp

Headlamp

OFF

Lighting switch

Extinguished

Illuminated

Front fog lamps