Mitsubishi Grandis. Manual — part 669
HOOD
BODY
42-4
ADJUSTMENT OF HOOD HEIGHT
M1421007400167
Turn bumper (B) to the shown dimension to adjust
the hood height. If the hood height is still not even,
turn bumper (B) again until the height is even.
NOTE: If bumper (B) is turned once, its height
changes by approximately 3 mm.
AC303550
21.4 mm
AC
A
A
Bumper B
Section A – A
HOOD
BODY
42-5
HOOD
REMOVAL AND INSTALLATION
M1421001600420
Post-installation Operation
• Adjustment of Clearance Around Hood (Refer to
).
• Adjustment of Alignment of Hood Stepped Portion and
Hood Striker (Refer to
• Adjustment of Hood Height (Refer to
AC310407
9.0 ± 2.0 N·m
4
3
5
8,9
Section B – B
Section A – A
Clip
11
12
Clip
9
12
10
6
A
A
7
22 ± 4 N·m
22 ± 4 N·m
22 ± 4 N·m
14
1
2
2
A
A
B
B
8
11
13
AB
6
<Front view>
4
<Rear view>
4
Hood bumper removal steps
1. Hood bumper A
2. Hood bumper B
Hood latch and hood lock release
cable removal steps
3. Hood latch cover
•
Front bumper (Refer to GROUP 51,
Front Bumper
4. Hood latch
5. Hood lock release cable cover
•
Cowl side trim (Refer to GROUP 52A,
Interior Trim
6. Hood lock release handle
•
Splash shield LH (Refer to
).
7. Hood lock release cable
Hood and hood hinge removal steps
8. Hood opening weatherstrip
9. Hood weatherstrip front
10. Hood weatherstrip rear
11. Hood Insulator
•
Washer hose, Washer nozzle (Refer
to GROUP 51, Windshield Washer
12 Hood
13 Hood support rod
Hood latch and hood lock release
cable removal steps (Continued)
FENDER
BODY
42-6
FENDER
REMOVAL AND INSTALLATION
M1421001900432
•
Fender (Refer to
14. Hood hinge
Hood and hood hinge removal steps
AC310063
1
4
3
AB
2
Note
: Clip positions
Splash shield removal step
1. Splash shield
Fender removal steps
1. Splash shield
•
Front bumper assembly (Refer to
GROUP 51, Front Bumper
•
Headlamp assembly (Refer to
GROUP 54A, Headlamp
).
2. Tip of roof drip moulding
3. Fender rear protector
4. Fender
•
Delta window glass (Refer to
).
Fender installation steps
4. Fender
•
Delta window glass (Refer to
3. Fender rear protector
2. Tip of roof drip moulding
•
Headlamp assembly (Refer to
GROUP 54A, Headlamp
•
Front bumper assembly (Refer to
GROUP 51, Front Bumper
).
1. Splash shield
FUEL FILLER LID
BODY
42-7
FUEL FILLER LID
REMOVAL AND INSTALLATION
M1421002500341
AC310400
5.0 ± 1.0 N·m
4
2
1
4
3
3
AB
Fuel filler lid height and clearance
adjustment
5
Removal steps
1.
Fuel filler lid
2.
Fuel filler lid damper spring
3.
Fuel filler lid lock release handle
•
Front scuff plate, Rear scuff plate,
Centre pillar trim lower (Refer to
GROUP 52A, Interior Trim
•
Third seat assembly (Refer to
GROUP 52A, Third Seat
•
Cargo floor box (Refer to GROUP
52A, Interior Trim
).
4.
Fuel filler lid hook
5.
Fuel filler lid lock release cable
Removal steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст