Mitsubishi Grandis. Manual — part 95
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-377
NOTE:
Prior to the wiring harness inspection, check
intermediate connector E-11 and junction block
connector C-211, and repair if necessary.
• Check the power supply line for open circuit.
Q: Is the check result normal?
YES :
Replace the room lamp.
NO :
Repair the wiring harness.
AC310626
Connector: C-219
Junction block (Rear view)
<LHD>
AB
Junction block side
AC310620
Connector: C-219
Junction block
(Rear view)
<RHD>
AB
Junction block side
AC310652
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles with
sunroof-LHD>
AC310656
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles with
sunroof-RHD>
AC310623
AC310623
Connector: C-211
AQ
<LHD>
Junction block (Front view)
Harness side
3
1
2
AC310618
AC310618
Connector: C-211 <RHD>
AS
Harness side
Junction block (Front view)
3
1
2
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-378
Step 5. Check the room lamp switch.
Check which position (ON or DOOR) of the room
lamp switch does not activate the room lamp.
Q: Which switch position does not activate the lamp?
The lamp illuminates at neither the ON nor DOOR
position. :
Go to Step 6.
The lamp does not illuminate at the ON position. :
Go to Step 6.
The lamp does not illuminate at the DOOR position.
:
Go to Step 8.
Step 6. Connector check: E-02 room lamp
connector
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Repair the defective connector.
Step 7. Check the bulbs of the room lamp.
Check that the room lamp bulbs are not burned out.
Q: Is the check result normal?
YES :
Replace the room lamp.
NO :
Replace the room lamp bulb.
Step 8. Connector check: E-02 room lamp
connector
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the defective connector.
Step 9. Check the bulbs of the room lamp.
Check that the room lamp bulbs are not burned out.
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Replace the room lamp bulb.
AC310651
AD
Connector: E-02 <LHD>
Harness side
AC310655
AE
Connector: E-02 <RHD>
Harness side
AC310651
AD
Connector: E-02 <LHD>
Harness side
AC310655
AE
Connector: E-02 <RHD>
Harness side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-379
Step 10. Check the wiring harness from C-219
ETACS-ECU connector terminal No.5 to E-02
room lamp connector terminal No.8.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-380
NOTE:
Prior to the wiring harness inspection, check
intermediate connector E-11 and junction block
connector C-211, and repair if necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
Replace the room lamp.
NO :
Repair the wiring harness.
AC310626
Connector: C-219
Junction block (Rear view)
<LHD>
AB
Junction block side
AC310620
Connector: C-219
Junction block
(Rear view)
<RHD>
AB
Junction block side
AC310652
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles with
sunroof-LHD>
AC310656
AB
Connectors: E-02, E-11
Harness side
E-02
E-11
E-02
E-11
<Vehicles with
sunroof-RHD>
AC310623
AC310623
Connector: C-211
AQ
<LHD>
Junction block (Front view)
Harness side
3
1
2
AC310618
AC310618
Connector: C-211 <RHD>
AS
Harness side
Junction block (Front view)
3
1
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст