Mitsubishi Grandis. Manual — part 179
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-178
Step 7. Connector check: F-05 power window
main switch connector and F-16 power window
motor (front: RH) connector.
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
Step 8. Check the wiring harness from F-05
power window main switch connector terminal
Nos.8, 9, 10 and 12 to F-16 power window motor
(front: RH) connector terminal Nos.6, 2, 4 and 5.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
Step 9. Retest the system.
After the power window main switch is replaced,
check that the driver's power window anti-trap
function works.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor (front:
LH).
AC310214
AC310214
AB
Connectors: F-05, F-16
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
F-16(B)
F-05
F-16
Harness side
AC310214
AC310214
AB
Connectors: F-05, F-16
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
F-16(B)
F-05
F-16
Harness side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-179
Step 10. Connector check: F-16 power window
motor (front: RH) connector.
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
Step 11. Resistance measurement at F-16 power
window motor (front: RH) connector.
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Resistance between F-16 power window motor
(front RH) connector terminal No.6 and body
earth.
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Go to Step 12.
Step 12. Check the wiring harness F-16 power
window motor (front: RH) connector terminal
No.6 to body earth.
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-14 and repair if necessary.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the wiring harness.
Step 13. Connector check: F-15 power window
sub switch (front: RH) connector.
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Repair the defective connector.
AC311147
AC
Connector: F-16
Harness side
<LHD>
F-16(B)
AC311147
AC
Connector: F-16
Harness side
<LHD>
F-16(B)
AC311338AE
Connector F-16
(Harness side)
AC311147
AC
Connector: F-16
Harness side
<LHD>
F-16(B)
AC310615
AB
Connector: C-14 <LHD>
AC311147
AC311147
AI
Connector: F-15
Harness side
<LHD>
F-15(B)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-180
Step 14. Check the wiring harness from F-15
power window sub switch (front: RH) connector
terminal Nos.2, 8 and 3 to F-16 power window
motor (front: RH) connector terminal Nos.2, 4
and 5.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the wiring harness.
Step 15. Retest the system.
After the power window sub switch (front: RH) is
replaced, check that the front passenger's anti-trap
function can be operated by the power window sub
switch.
(1) Replace the power window sub switch (front:
RH).
(2) Check that the front passenger's power window
anti-trap function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor (front:
RH).
Step 16. Connector check: F-10 power window
motor (front: LH) connector.
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Repair the defective connector.
Step 17. Resistance measurement at F-10 power
window motor (front: LH) connector.
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Resistance between F-10 power window motor
(front: LH) connector terminal No.6 and body
earth.
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 19.
NO :
Go to Step 18.
AC311147
AD
Connectors: F-15, F-16
Harness side
F-15(B)
Harness side
F-16(B)
F-15
F-16
<LHD>
AC310211
AC
Connector: F-10
Harness side
<RHD>
F-10(B)
AC310211
AC
Connector: F-10
Harness side
<RHD>
F-10(B)
AC311338
AC311338 AF
Connector F-10
(Harness side)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-181
Step 18. Check the wiring harness F-10 power
window motor (front: LH) connector terminal
No.6 to body earth.
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-27 and repair if necessary.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 19.
NO :
Repair the wiring harness.
Step 19. Connector check: F-26 power window
sub switch (front: LH) connector power window
sub switch (front: RH) connector.
Q: Is the check result normal?
YES :
Go to Step 20.
NO :
Repair the defective connector.
Step 20. Check the wiring harness from F-26
power window sub switch (front: LH) connector
terminal Nos.2, 8 and 3 to F-10 power window
motor (front: LH) connector terminal Nos.2, 4 and
5.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 21.
NO :
Repair the wiring harness.
Step 21. Retest the system.
After the power window sub switch (front: LH) is
replaced, check that the front passenger's anti-trap
function can be operated by the power window sub
switch.
(1) Replace the power window sub switch (front: LH).
(2) Check that the front passenger's power window
anti-trap function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor (front:
LH).
Step 22. Connector check: F-19 power window
motor (rear: RH) connector.
Q: Is the check result normal?
YES :
Go to Step 23.
NO :
Repair the defective connector.
AC310211
AC
Connector: F-10
Harness side
<RHD>
F-10(B)
AC310628AC
Connector: C-27 <RHD>
AC310211
AC310211
AI
Connector: F-26 <RHD>
F-26(B)
Harness side
AC310211
AC310211
AD
Connectors: F-10, F-26 <RHD>
Harness side
F-10(B)
F-26(B)
Harness side
F-26
F-10
AC310216
Connector: F-19
F-19(B)
AC
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст