Mitsubishi Grandis. Manual — part 84
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-333
Step 17. Check the wiring harness from the A-33
front turn-signal lamp (RH) connector terminal
No.2 to C-219 ETACS-ECU connector terminal
No.9 or A-23 front turn-signal lamp (LH)
connector terminal No.2 to C-219 ETACS-ECU
connector terminal No.14.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-334
AC310403
A-23 (B)
AI
Connector: A-23 <LHD>
Harness side
AC310398
A-23 (B)
AI
Connector: A-23 <RHD>
Harness side
AC310401
Connector: A-33 <LHD>
Harness side
AI
A-33 (B)
AC310396
Connector: A-33 <RHD>
Harness side
AG
A-33 (B)
AC310626
Connector: C-219
Junction block (Rear view)
<LHD>
AB
Junction block side
AC310620
Connector: C-219
Junction block
(Rear view)
<RHD>
AB
Junction block side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-335
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-125 and junction block
connector C-203, and repair if necessary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 18.
NO :
Repair the wiring harness.
Step 18. Retest the system.
Check that the turn-signal lamps illuminate normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the headlamp assembly.
Step 19. Connector check: C-219 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 20.
NO :
Repair the defective connector.
AC310613
AD
Connector: C-125 <LHD>
AC310628AB
Connector: C-125 <RHD>
AC310623
Connectors: C-203 <LHD>
AL
Harness side
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Junction block (Front view)
AC310618
Connectors: C-203 <RHD>
AK
Harness side
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Junction block (Front view)
AC310626
Connector: C-219
Junction block (Rear view)
<LHD>
AB
Junction block side
AC310620
Connector: C-219
Junction block
(Rear view)
<RHD>
AB
Junction block side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-336
Step 20. Connector check: F-13 door mirror
assembly (RH) or F-07 door mirror assembly (LH)
connector.
Q: Is the check result normal?
YES :
Go to Step 21.
NO :
Repair the defective connector.
AC311150
AD
Connector: F-07
Harness side
<LHD>
AC310211
AF
Connector: F-07 <RHD>
Harness side
AC311147
AF
Connector: F-13 <LHD>
Harness side
AC310213
AE
Connector: F-13 <RHD>
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст