Mitsubishi Grandis. Manual — part 175
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-162
Step 8. Check the wiring harness from F-15
power window sub switch (front: RH) connector
<LH drive vehicles> or F-26 power window sub
switch (front: LH) connector <RH drive vehicles>
terminal No.6 to the inserted probe.
NOTE:
Prior to the wiring harness inspection, check
intermediate connectors C-14, C-27, and repair if
necessary.
• Check the communication lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
AC311147
AB
Connector: F-15
<LHD>
Harness side
F-15(B)
AC310211
AB
Connector: F-26
Harness side
<RHD>
F-26(B)
AC310615
AB
Connector: C-14 <LHD>
AC310631
Connector: C-14 <RHD>
AG
AC310613
Connector: C-27 <LHD>
AJ
AC310628AC
Connector: C-27 <RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-163
Step 9. Check the power window sub switch.
Check that the front passenger's power window
works by means of the power window sub switch
(front: LH) when the power window lock switch is
turned off.
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Refer to inspection procedure D-3 "Relevant
power window(s) do not work by means of
the front and rear power window sub
switches
Step 10. Retest the system.
After the power window sub switch (front: LH) is
replaced, check that the front passenger's door
power window can be operated by the power window
sub switch.
(1) Replace the power window sub switch (front: LH).
(2) Check that the front passenger's power window
works by means of the power window main
switch.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window main switch.
Step 11. Connector check: F-05 power window
main switch connector.
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Repair the connector.
AC311150
AB
Connector: F-05
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AC310213
Connector: F-05
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AB
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-164
Step 12. Check the wiring harness from F-05
power window main switch connector terminal
No.11 to the inserted probe.
NOTE:
AC311150
AB
Connector: F-05
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AC310213
Connector: F-05
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AB
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-165
Prior to the wiring harness inspection, check
intermediate connectors C-16, C-14 <RH drive
vehicles>, C-27 <LH drive vehicles>, D-03, and
repair if necessary.
• Check the communication lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the wiring harness.
Step 13. Connector check: F-18 power window
sub switch (rear RH) connector.
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Repair the connector.
AC310632BA
Connectors: C-14, C-16
C-16
C-14
C-14
C-16
<RHD>
AC310615
AE
Connector: C-16 <LHD>
AC310613
Connector: C-27 <LHD>
AJ
AC310633 AB
Connector: D-03 <LHD>
D-03(B)
AC310205
AB
Connector: D-03 <RHD>
D-03(B)
AC310216
Connector: F-18
F-18(B)
AB
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст