Mitsubishi Grandis. Manual — part 176
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-166
Step 14. Check the wiring harness from F-18
power window sub switch (rear: RH) connector
terminal No.6 to the inserted probe.
NOTE:
AC310216
Connector: F-18
F-18(B)
AB
Harness side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-167
Prior to the wiring harness inspection, check
intermediate connectors C-16, C-14 <RH drive
vehicles>, C-27 <LH drive vehicles>, D-03, and
repair if necessary.
• Check the communication lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the wiring harness.
Step 15. Check the power window sub switch.
Check that the rear right power window works by
means of the power window sub switch (rear: RH)
when the power window lock switch is turned off.
Q: Is the check result normal?
YES :
Go to Step 16.
NO :
Refer to inspection procedure D-3 "Relevant
power window(s) do not work by means of
the front and rear passenger's power
window sub switches
Step 16. Retest the system.
After the power window sub switch (rear: RH) is
replaced, check that the rear right door power
window can be operated by the power window sub
switch.
(1) Replace the power window sub switch (rear: RH).
(2) Check that the rear right power window works by
means of the power window main switch.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window main switch.
AC310632BA
Connectors: C-14, C-16
C-16
C-14
C-14
C-16
<RHD>
AC310615
AE
Connector: C-16 <LHD>
AC310613
Connector: C-27 <LHD>
AJ
AC310633 AB
Connector: D-03 <LHD>
D-03(B)
AC310205
AC
D-03 (B)
9
3
2
1
5 6 7 8
4
10
Connector: D-03 <RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-168
Step 17. Connector check: F-05 power window
main switch connector.
Q: Is the check result normal?
YES :
Go to Step 18.
NO :
Repair the connector.
AC311150
AB
Connector: F-05
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AC310213
Connector: F-05
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AB
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-169
Step 18. Check the wiring harness from F-05
power window main switch connector terminal
No.11 to the inserted probe.
NOTE:
AC311150
AB
Connector: F-05
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AC310213
Connector: F-05
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст