Mitsubishi Outlander (2013+). Manual — part 91
WIPER AND WASHER
EXTERIOR
51-13
Rain sensitive AUTO wiper function <Optional>
• Lighting control sensor (rain sensor) has been
installed in the upper part of the windshield to
sense the raindrops and windshield wiper can be
operated when the ignition switch is at ON and
wiper switch is at AUTO position.
• The lighting control sensor detects the raindrops
on the windshield surface using the optical ele-
ment, and it automatically switches the wind-
shield wiper operation, depending on the amount
of rainfall, to the intermittent or LO/HI operation.
• The lighting control sensor detects the raindrops
using the reflections of infrared rays, and
depending on the amount of rainfall, it automati-
cally adjusts the wiping speed.
• Dry windshield: All infrared rays emitted from the
emitter diode are reflected by the windshield and
directed to the receiver diode as they are.
• Wet windshield: Part of the infrared rays emitted
from the emitter diode are transmitted to outside
of the windshield through the raindrops, and the
infrared rays with reduced intensity are directed
to the receiver diode.
NOTE: Using the customise function, the rain sensi-
tive AUTO wiper function can be invalidated (Refer to
).
Delayed finishing wipe function <Initial condition: with function>
1. When the washer lever of the column switch is
operated for 0.5 seconds or longer with the igni-
tion switch in the ACC or ON position, or when
the comfort washer function is enable, the
washer fluid is sprayed and the wiper is operated.
6 seconds after stopping the wiper operation, the
wiper operates once to wipe out the washer fluid
ran down.
NOTE: Using the customise function, the delayed fin-
ishing wipe function can be invalidated (Refer to ).
ACB05683AB
Windshield
Lighting control sensor
Windshield
Receiver diode
Emitter diode
Raindrop
High
intensity
Receiver diode
Emitter diode
Reduced
intensity
Windshield
Optical
element
Optical
element
Dry windshield
Wet windshield
Infrared rays
Infrared rays
WIPER AND WASHER
EXTERIOR
51-14
REAR WIPER AND WASHER
M2510008000748
CONSTRUCTION DIAGRAM
• Resin wiper arm has been adopted to achieve
weight reduction and integration of the arm and
blade.
• Fixed interval type intermittent wiper* has been
adopted to provide a clear rear view in rainy
weather.
• The washer tank is shared with the windshield
washer.
• Washer-linked wiper function* has been adopted.
Washer fluid can be optionally injected without
operating the wiper optionally. When the ignition
switch is turned ON while the washer switch is
ON, the washer motor operates but the wiper
does not.
• Reverse gear-linked rear wiper function (auto-
matic rear window wiper operation with reverse
gear engaged)* has been adopted. In this func-
tion, the rear wiper performs continuous
low-speed operation for 3 cycles approximately 1
second after the selector lever is shifted to "R"
position while the front or rear wiper switch is in
the intermittent position, and then proceed with
the intermittent operation.
NOTE: *: Using the customise function, the fixed
interval type intermittent wiper, reverse gear-linked
rear wiper function and the washer-linked wiper func-
tion can be adjusted (Refer to ).
ACC00126AB
Rear wiper arm
Rear wiper blade
Rear wiper hose
Rear washer
nozzle
Rear wiper
motor
WIPER AND WASHER
EXTERIOR
51-15
DESCRIPTION OF CONSTRUCTION AND OPERATION
Rear wiper control <Initial condition: Front or rear wiper switch ON>
When the rear wiper switch on the column switch is
turned ON while the ignition switch is in ACC or ON
position, ETACS turns the rear wiper relay ON for 3
seconds (for approximately 2 cycles) and operates
the intermittent action in 8 seconds interval.
When the selector lever is moved to R (reverse)
position during the front or rear wiper operation, the
inhibitor switch R (reverse) turns ON, and 1 second
after that, ETACS turns the rear wiper relay ON for 3
seconds (for approximately 3 cycles), and operates
the intermittent action in 8 seconds interval again.
NOTE: Using the customise function, the operation
with front/rear wiper ON can be switched to the oper-
ation with the rear wiper only ON. (Refer to .)
Washer-linked rear wiper function <Initial condition: with function>
When the rear washer switch on the column switch is
turned ON while the ignition switch is in ACC or ON
position, ETACS turns the rear washer relay ON.
The rear washer relay turns ON after the rear washer
switch has been ON for 0.3 seconds, then turns the
rear wiper relay ON to operate the rear wiper simul-
taneously. When the rear washer switch is turned
OFF, after 3 seconds the rear wiper is turned OFF.
If the rear washer switch is turned ON during the rear
wiper operation, 7.4 seconds after turning OFF the
rear wiper relay turns OFF, the intermittent action is
resumed in 8 seconds interval.
NOTE: Using the customise function, the washer
linked rear wiper function can be invalidated (Refer
to ).
AC207474
OFF
AO
T2: 7.4 seconds
ON
T3
T4
Rear wiper relay
OFF
ON
Rear wiper switch
OFF
ON
T1
T2
T2
T2
T2
Inhibitor switch
"R" position
t
T1: 3.0 seconds
t: 1.0 second
T4
T1
T4
T3
T2
T3
T4
T4
T3: 8.0 seconds
T4: 0.6 second
AC507498AE
t : 0.3 second
T1 : 3 seconds
T2 : 7.4 seconds
T3 : 8 seconds
T4 : 0.6 second
t
t
t
ON
OFF
ON
OFF
ON
OFF
T1
T1
T1
T2
T3
T4
T4
Rear wiper switch
in off position
Rear wiper switch in on position
Rear washer switch
Rear washer relay
Rear wiper relay
HEADLAMP WASHER <OPTIONAL>
EXTERIOR
51-16
HEADLAMP WASHER <OPTIONAL>
M2510000500437
CONSTRUCTION DIAGRAM
• The headlamp washer can be operated with the
ignition switch at the ON or ACC position and the
headlamp switch at the ON position. Push the
headlamp washer button located at the end of the
lighting lever once and the washer will be
sprayed onto the headlamps.
• A headlamp washer mechanism that thrusts out
and retracts nozzles, utilizing the water pressure
produced by motors has been adopted as an
option. This mechanism contributes to better
appearances of vehicles when their washer noz-
zles are not in use.
• The headlamp washer tank used for this mecha-
nism is also used for the windshield and rear win-
dow washers.
ACC00343
A
A
AB
Section A – A <Headlamp washer operated>
Section A – A
Washer tank
Headlamp washer motor
Headlamp
washer
nozzle
Washer hose
Headlamp washer
cover
Headlamp
Front bumper
Headlamp washer cover
Headlamp washer
actuator assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст