Mitsubishi Outlander (2013+). Manual — part 645
COMBINATION METER
CHASSIS ELECTRICAL
54A-65
TEST
Item No.
Item name
Test content
2
LCD (AUTO)
The multi information display screen changes by looping in the
following order.
<Standard meter>
1. All the segments are displayed.
2. Number 2 of the segments are displayed.
3. All the segments except some segments are displayed.
<High contrast meter>
1. The version information is displayed.
2. A white full screen is displayed.
3. A screen with Red, Green, Black and white gradation is
displayed.
4. A black full screen is displayed.
3
Buzzer (AUTO)
The buzzer sounds.
4
Pointer (AUTO)
Makes the speedometer and tachometer sweep from zero to full
scale.
5
Illumination (AUTO)
Makes the meter needles, the instrument face plate, the
variable-dimming LED indicator and the LCD screen back light
sweep 0% to 100% and vice versa.
6
Indicator (AUTO)
Toggles all of the LED indicators ON and OFF.
TURN-SIGNAL SOUND CUSTOMIZATION
Item No.
Item name
Test content
1
Signal sound setting
Customising turn-signal sound
CHECK PROCEDURE FOR EACH MULTI
INFORMATION DISPLAY SCREEN <HIGH
CONTRAST METER>
M1540201901220
CAUTION
When there are TV towers, substations, or broad-
casting stations which emit strong radio waves
in proximity, on rare occasions, a warning is dis-
played on the multi information screen for a few
seconds. This is caused by the reception of
strong radio waves, and there is no functional
problem.
WARNING SCREEN
When malfunctions occur to the vehicle, the following
warning screens are displayed. If these screens are
not displayed normally or if they continue to be dis-
played even after the factor is eliminated, take meas-
ures according to the action procedure.
COMBINATION METER
CHASSIS ELECTRICAL
54A-66
Display content
Message
Factor
Action procedure
AC809615
REMOVE KEY
Displayed with the
sounding of buzzer
when the driver's door is
opened with the ignition
switch in the LOCK
(OFF) position and the
key inserted in the
ignition switch key
cylinder.
If the ignition key reminder buzzer
does not sound, diagnose the
ignition key reminder buzzer.
Refer to
AC809612
TURN OFF
LIGHTS
Displayed with the
sounding of buzzer
when the driver's door is
opened with the ignition
switch at the LOCK
(OFF) or ACC position
and the lighting switch at
the tail or head position.
If the lighting monitor warning
buzzer is not being sounded,
perform the troubleshooting for
the lighting monitor warning
buzzer. Refer to
.
AC809614
KEY BATTERY
LOW
Displayed when the
keyless operation key
battery is running low.
If the warning screen is not
displayed normally or if the screen
continues to be displayed,
perform the troubleshooting for
the KOS. Refer to GROUP 42B
−
Diagnosis code chart .
AC809615
KEY NOT
DETECTED
Displayed if carrying a
keyless operation key
with different ID code or
the keyless operation
key is outside the
operative range.
AC809615
KEY STILL IN
VEHICLE
Displayed when the
keyless operation key
take-out monitoring
function or keyless
operation key
confinement prevention
function is in operation.
AC809615
CHECK DOORS
Displayed when the
door ajar prevention
function is in operation.
AC809615
COMBINATION METER
CHASSIS ELECTRICAL
54A-67
KEYLESS
OPERATION
SYSTEM
SERVICE
REQUIRED
Displayed when there is
a malfunction to KOS.
If the warning screen is not
displayed normally or if the screen
continues to be displayed,
perform the troubleshooting for
the KOS. Refer to GROUP 42B
−
Diagnosis code chart .
AC904250
KEY NOT
DETECTED
INSERT KEY
INTO KEY SLOT
Displayed when the
keyless operation key
cannot be detected.
AC904251
REMOVE KEY
FROM KEY SLOT
Displayed when the key
is not removed from the
key slot located in the
glove box.
AC904252
−
Displayed when the
lock/unlock switch of
front door outside
handle is pressed while
in the power mode other
than OFF.
AC904252
−
Displayed when the
driver's door is open
while in the power mode
other than OFF.
If the warning screen is not
displayed normally or if the screen
continues to be displayed,
perform the troubleshooting for
the OSS. Refer to GROUP 42B
−
Diagnosis code chart .
AC904253
IMMOBILIZER
SYSTEM
SERVICE
REQUIRED
Displayed when a
malfunction occurs to
the immobilizer system.
AC904254
PUSH ENGINE
SWITCH WHILE
TURNING
STEERING
WHEEL
Displayed when the
steering lock is in
operation.
AC904255
STEERING
LOCK SERVICE
REQUIRED
Displayed when a
malfunction occurs to
the steering lock.
Display content
Message
Factor
Action procedure
AC904256
COMBINATION METER
CHASSIS ELECTRICAL
54A-68
SHIFT TO P
POSITION
Displayed when the
engine is stopped while
the selector lever is in
other than P position.
If the warning screen is not
displayed normally or if the screen
continues to be displayed,
perform the troubleshooting for
the OSS. Refer to GROUP 42B
−
Diagnosis code chart .
AC904257
STEERING
WHEEL
UNLOCKED
Displayed when the
steering lock is not in
operation.
AC904260
ELECTRICAL
SYSTEM
SERVICE
REQUIRED
Displayed when a
malfunction occurs to
the power supply
system.
AC904258
PRESS BRAKE
PEDAL TO
START ENGINE
Displayed when the
engine switch is pressed
without the brake pedal
depressed at starting the
engine.
AC809617
BRAKE SYSTEM
SERVICE
REQUIRED
Displayed when the
brake fluid amount is
insufficient or a
malfunction occurs to
the brake device.
If the warning screen is not
displayed normally or if the screen
continues to be displayed, check
the brake fluid or brake device.
Refer to GROUP 35A
−
On-vehicle Service .
AC809617
RELEASE
PARKING BRAKE
Displayed if vehicle is
driven with the parking
brake engaged.
If the warning screen is not
displayed normally or if the screen
continues to be displayed, check
the parking brake. Refer to
GROUP 36
− On-vehicle Service .
AC809618
ABS SERVICE
REQUIRED
Displayed when a
malfunction occurs to
the anti-skid braking
system (ABS).
If the warning screen is not
displayed normally or if the screen
continues to be displayed,
perform the troubleshooting for
the ABS or ASC. Refer to GROUP
35B
− Trouble Symptom Chart
<ABS> or GROUP 35C
− Trouble
Symptom Chart <ASC>.
AC809619
ENGINE
OVERHEATING
STOP SAFELY
Displayed when
overheated.
If the warning screen is not
displayed normally or if the screen
continues to be displayed,
perform the troubleshooting for
the engine. Refer to GROUP 13A
− Trouble Symptom Chart .
Display content
Message
Factor
Action procedure
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст