Mitsubishi Montero Sport (2004+). Manual — part 88
SPECIFICATIONS
TSB Revision
ENGINE MECHANICAL
11A-41
SERVICE SPECIFICATIONS
M1112000300171
SEALANT
M1111000500291
Timing belt lower cover attaching bolt
11 N
⋅m (97 in-lb)
Timing belt lower cover attaching nut
4.9 N
⋅m (43 in-lb)
Timing belt tension arm assembly attaching bolt
44 N
⋅m (33 ft-lb)
Timing belt tension pulley attaching bolt
48 N
⋅m (35 ft-lb)
Timing belt upper cover attaching bolt (6
×18)
11 N
⋅m (97 in-lb)
Timing belt upper cover attaching bolt
14 N
⋅m (124 in-lb)
Timing indicator bracket attaching bolt
11 N
⋅m (97 in-lb)
Transmission mounting bolt
35 N
⋅m (26 ft-lb)
Upper oil pan attaching bolt
5.9 N
⋅m (52 in-lb)
Water outlet pipe attaching bolt
12
− 15 N⋅m (106 − 133 in-lb)
Water passage assembly attaching bolt
17
− 20 N⋅m (12 − 14 ft-lb)
Water pipe and hose assembly attaching bolt
12
− 15 N⋅m (106 − 133 in-lb)
ITEM
SPECIFICATION
ITEM
STANDARD VALUE
LIMIT
Basic ignition timing at idle
5
° BTDC ± 3°
−
Actual ignition timing at curb idle
Approximately 10
°
BTDC
−
CO contents %
0.5 or less
−
HC contents ppm
100 or less
−
Curb idle speed r/min
700
± 100
−
Compression pressure (250
− 400 r/min) kPa (psi)
1200 (171)
Minimum 890 (127)
Compression pressure difference of all cylinder kPa (psi)
−
98 (14)
Intake manifold vacuum at curb idle kPa (in Hg)
−
Minimum 60 (18)
Timing belt tensioner torque N
⋅m (in-lb)
4.4 (39)
Timing belt tensioner adjuster rod protrusion amount mm
(in)
3.8
− 5.0 (0.15 − 0.20)
−
Timing belt tensioner adjuster rod movement mm (in)
Within 1 (0.04)
−
ITEM
SPECIFIED SEALANT
Oil pan
MITSUBISHI GENUINE Part No. MD970389 or
equivalent
NOTES
12-1
GROUP 12
ENGINE
LUBRICATION
CONTENTS
GENERAL DESCRIPTION. . . . . . . . .
SPECIAL TOOL . . . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE. . . . . . . . . . .
ENGINE OIL CHECK . . . . . . . . . . . . . . . . .
ENGINE OIL REPLACEMENT . . . . . . . . . .
ENGINE OIL FILTER REPLACEMENT . . .
ENGINE OIL PRESSURE CHECK . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . .
FASTENER TIGHTENING
SPECIFICATION . . . . . . . . . . . . . . . . . . . . .
SERVICE SPECIFICATIONS . . . . . . . . . . .
SEALANT . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL DESCRIPTION
TSB Revision
ENGINE LUBRICATION
12-2
GENERAL DESCRIPTION
M1121000100432
The lubrication method is a fully force-fed, full-flow filtration type.
ENGINE OILS
WARNING
Prolonged and repeated contact with mineral oil will result in the removal of natural fats from
the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains
potentially harmful contaminants which may cause skin cancer. Adequate means of skin pro-
tection and washing facilities must be provided.
.
RECOMMENDED PRECAUTIONS
The most effective precaution is to adapt working
practices which prevent, as far as practical, the risk
of skin contact with mineral oils i.e. use enclosed
systems for handling used engine oil and degrease
components, where practical, before handling them.
.
OTHER PRECAUTIONS:
• Avoid prolonged and repeated contact with oil,
particularly used engine oil.
• Wear protective clothing, including impervious
gloves where practical.
• Avoid contaminating clothes with oil.
• Do not put oily rags in pockets.
• Do not wear heavily soiled clothing and
oil-soaked foot-wear. Overalls must be cleaned
regularly and kept separate from personal cloth-
ing.
• Where there is a risk of eye contact, eye protec-
tion should be worn i.e. chemical goggles or face
shields. In addition, an eye wash facility should
be provided.
• Obtain first aid treatment immediately for open
cuts and wounds.
• Wash regularly with soap and water to ensure all
oil is removed (skin cleansers and nail brushes
will help). After cleaning, apply lotion, etc., con-
taining lanolin to replace natural skin oils is
advised.
• Do not use gasoline, kerosene, diesel fuel, gas
oil, thinners or solvents for cleaning skin.
• Apply barrier creams before each work period.
• If skin disorders develop, obtain medical advice
immediately.
SPECIAL TOOL
M1121000600426
ITEM
SPECIFICATION
Oil pump type
Trochoid type
Drive method
Crankshaft
TOOL
TOOL NUMBER AND
NAME
SUPERSESSION
APPLICATION
MD998054
Engine oil pressure
switch wrench
General service tool or
MD998054-01
Removal and installation
of engine oil pressure
switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст