Mitsubishi Montero Sport (2004+). Manual — part 455
DOOR
TSB Revision
BODY
42-75
NOTE: After inspecting intermediate connectors E-31 and E-42
inspect the wire. If intermediate connectors E-31 or E-42 is
damaged, repair or replace damaged component. Refer to
GROUP 00E
, Harness Connector Inspection. Then go
to Step 22.
Q: Are there any damaged harness wires between
ETACS-ECU connectors D-10 (terminals No.21 and
No.24) <Vehicles without keyless entry system> or D-27
(terminals No.41 and No.42) <Vehicles with keyless
entry system> and door lock actuator (reart: LH)
connector F-09 (terminals No.1 and No.2)?
YES : Replace the ETACS-ECU and then go to step 22.
NO : Repair or replace the damaged components. Refer to
GROUP 00E
, Harness Connector inspection.
Then go to Step 22.
STEP 18. Check door lock actuator (liftgate) connector
G-04 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Is the connector in good condition?
YES : Go to step 19.
NO : Repair or replace the damaged components. Refer to
GROUP 00E
, Harness Connector inspection.
Then go to Step 22.
AC309451
6
2
7
5
1
3 4
8
19
7
6
5
16
15
17 18
4
3
2
10 11 12 13
1
9
14
CONNECTORS: E-31, E-42
E-03
E-42
E-42
E-31
AB
AC202036
1
4 3
2
5
CONNECTOR: G-04
AB
G-04
COMPONENT
SIDE
DOOR
TSB Revision
BODY
42-76
STEP 19. Check the door lock actuator (liftgate).
(1) Remove the liftgate lock key cylinder (Refer to
).
(2) Follow the table to check the liftgate lock actuator operation
(lock/unlock).
Actuator Operation Check
Q: Is the liftgate lock actuator damaged?
YES : Replace liftgate lock actuator, then go to Step 22 .
NO : Go to Step 20.
LEVER
POSITION
BATTERY
CONNECTION
LEVER
OPERATION
At the "LOCK"
position
• Connect terminal
No. 1 and the
positive battery
terminal.
• Connect terminal
No. 2 and the
negative battery
terminal.
The lever moves
from the "LOCK"
position to the
"UNLOCK"
position.
At the "UNLOCK"
position
• Connect terminal
No. 2 and the
positive battery
terminal.
• Connect terminal
No. 1 and the
negative battery
terminal.
The lever moves
from the
"UNLOCK"
position to the
"LOCK" position.
5
4
3
2
1
AC003805AB
UNLOCK
LOCK
A
VIEW A
DOOR
TSB Revision
BODY
42-77
STEP 20. Check ETACS-ECU connectors D-10 <Vehicles
without keyless entry system> and D-27 <Vehicles with
keyless entry system> for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are ETACS-ECU connectors D-10 <Vehicles without
keyless entry system> and D-27 <Vehicles with keyless
entry system> in good condition?
YES : Go to Step 21.
NO : Repair or replace the damaged components. Refer to
GROUP 00E
, Harness Connector inspection.
Then go to Step 22.
AC202002
6 5 4
1
2
7
3
8
41
43
51
42
50
44
52
46 45
53
49
47
30
48
56
55
D-27 (B)
D-10
JUNCTION
BLOCK (REAR)
CONNECTORS: D-10, D-27
AB
D-27 COMPONENT SIDE
D-10 COMPONENT SIDE
21
22
23
24
25
26
27
28
DOOR
TSB Revision
BODY
42-78
STEP 21. Check the harness wire between ETACS-ECU
connectors D-10 (terminals No.21 and No.24) <Vehicles
without keyless entry system> or D-27 (terminals No.41
and No.42) <Vehicles with keyless entry system> and door
lock actuator (liftgate) connector G-04 (terminals No.1 and
No.2).
AC202002
6 5 4
1
2
7
3
8
41
43
51
42
50
44
52
46 45
53
49
47
30
48
56
55
D-27 (B)
D-10
JUNCTION
BLOCK (REAR)
CONNECTORS: D-10, D-27
AB
D-27 COMPONENT SIDE
D-10 COMPONENT SIDE
21
22
23
24
25
26
27
28
AC202036
1
4 3
2
5
CONNECTOR: G-04
AB
G-04
COMPONENT
SIDE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст