Mitsubishi Montero Sport (2004+). Manual — part 766
34-1
GROUP 34
REAR SUSPENSION
CONTENTS
GENERAL DESCRIPTION. . . . . . . . .
SPECIAL TOOLS. . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE. . . . . . . . . . .
REAR WHEEL ALIGNMENT CHECK AND
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . .
LOWER ARM . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
LOWER ARM BUSHING REPLACEMENT.
SHOCK ABSORBER AND LATERAL
ROD . . . . . . . . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
LATERAL ROD BUSHING
REPLACEMENT . . . . . . . . . . . . . . . . . . . . .
COIL SPRING AND AXLE BUMPER .
REMOVAL AND INSTALLATION . . . . . . . .
STABILIZER BAR. . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . .
FASTENER TIGHTENING
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . .
GENERAL SPECIFICATIONS . . . . . . . . . .
SERVICE SPECIFICATIONS . . . . . . . . . . .
GENERAL DESCRIPTION
TSB Revision
REAR SUSPENSION
34-2
GENERAL DESCRIPTION
M1341000100397
The rear suspension is the 3 link coil spring type axle
suspension, which assures comfortable ride and out-
standing steering stability.
CONSTRUCTION DIAGRAM
AC309531AB
STABILIZER BAR
LOWER ARM
SHOCK ABSORBER
LATERAL ROD
COIL SPRING
SPECIAL TOOLS
TSB Revision
REAR SUSPENSION
34-3
SPECIAL TOOLS
M1341000600444
ON-VEHICLE SERVICE
REAR WHEEL ALIGNMENT CHECK AND
ADJUSTMENT
M1341011000402
The rear suspension assembly must be free of worn, loose or
damaged parts prior to measurement of rear wheel alignment.
Standard value:
• Toe-in: 0 mm (0 inch)
• Camber: 0
NOTE: Toe-in and camber are set at the factory and cannot be
adjusted. If toe-in or camber is not within the standard value,
check and replace bent or damaged parts.
TOOL
TOOL NUMBER AND
NAME
SUPERSESSION
APPLICATION
MB990891
Bushing remover installer
base
−
Removal and installation
of lower arm bushing
MB991318
Lower arm bushing arbor
−
MB990971
Bushing remover installer
base
−
MB991411
Rear wheel bearing and
hub installer joint
−
MB990650
Lower arm bushing arbor
−
Removal and installation
of lateral rod bushing
MB991318
MB990971
MB991411
MB990650
LOWER ARM
TSB Revision
REAR SUSPENSION
34-4
LOWER ARM
REMOVAL AND INSTALLATION
M1341008800066
CAUTION
*: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on
the ground in an unladen condition.
Required Special Tools:
• MB990891: Bushing Remover Installer Base
• MB990971: Rear Wheel Bearing and Installer
Joint
• MB991318: Lower Arm Bushing Arbor
• MB991411: Rear Wheel Bearing and Hub
Installer Joint
Pre-removal Operations
• Support the axle housing with a jack
AC309532 AB
17 N·m
13 ft-lb
216
-
245 N·m*
159
-
181 ft-lb*
216
-
245 N·m*
159
-
181 ft-lb*
1
2
3
4
REMOVAL STEPS
1. PARKING BRAKE ATTACHING
BOLT
2. SPEED SENSOR ATTACHING BOLT
<VEHICLE WITH ABS>
3. BOLT ASSEMBLY
4. LOWER ARM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст