Mitsubishi Montero (2002-2004). Manual — part 312
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-295
STEP 7. Measure at combination meter connector D-03 in
order to check the ignition switch (IG1) line of the power
supply to the combination meter.
(1) Disconnect combination meter connector D-03, and
measure at the wiring harness side.
(2) Turn the ignition switch to the "ON" position.
(3) Measure the voltage between terminal 62 and ground.
• The voltage should be approximately 12 volts (battery
positive voltage).
Q: Is the measured voltage approximately 12 volts (battery
positive voltage)?
YES : Go to Step 10.
NO : Go to Step 8.
STEP 8. Check combination meter connector D-03 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is combination meter connector D-03 in good
condition?
YES : Go to Step 9.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the seat belt warning light
illuminates normally.
AC204170
CONNECTOR : D-03
AC
D-03(GR)
HARNESS
SIDE
51
52
61 60
53
54
56
57
55
63
66 65 64
59
62
58
67
D-03(GR)
61
62
63
64
65
66
57
58
59
60
51
52
53
54
55
56
67
ACX01583 AB
CONNECTOR D-03
(HARNESS SIDE)
AC204170
CONNECTOR : D-03
AC
D-03(GR)
HARNESS
SIDE
51
52
61 60
53
54
56
57
55
63
66 65 64
59
62
58
67
D-03(GR)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-296
STEP 9. Check the wiring harness between combination
meter connector D-03 (terminal 62) and the ignition switch
(IG1).
NOTE: Also check junction block connectors D-208 and D-210
for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If junction block connector D-208 or D-
210 is damaged, repair or replace the damaged component(s)
as described in GROUP 00E, Harness Connector Inspection
.
Q: Is the wiring harness between combination meter
connector D-03 (terminal 62) and the ignition switch
(IG1) in good condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the seat belt warning light illuminates normally.
AC204170
CONNECTOR : D-03
AC
D-03(GR)
HARNESS
SIDE
51
52
61 60
53
54
56
57
55
63
66 65 64
59
62
58
67
D-03(GR)
AC204191
CONNECTORS: D-208, D-210
D-208
AC
HARNESS SIDE
HARNESS SIDE
D-210
D-208
D-210
1
2
3
5
6
4
1
2
7 6
3
9
4
11
12
10
13
5
8
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-297
STEP 10. Check combination meter connector D-04 and
ETACS-ECU connector D-224 for loose, corroded or
damaged terminals, or terminals pushed back in the
connector.
Q: Are combination meter connector D-04 and ETACS-ECU
connector D-224 in good condition?
YES : Go to Step 11.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the seat belt warning light
illuminates normally.
STEP 11. Check the wiring harness between combination
meter connector D-04 (terminal 32) and ETACS-ECU
connector D-224 (terminal 39).
Q: Is the wiring harness between combination meter
connector D-04 (terminal 32) and ETACS-ECU connector
D-224 (terminal 39) in good condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the seat belt warning light illuminates normally.
AC204170
CONNECTOR : D-04
AD
D-04(GR)
HARNESS
SIDE
D-04(GR)
31
32
41 40
33
34
36
37
35
43
46 45 44
39
42
38
47
AC204174
CONNECTOR : D-224
AD
D-224(B)
D-224(B)
HARNESS SIDE
21
23
24
22
32
3433
31
26
27
28
3029
38
39
40
36
37
25
35
AC204170
CONNECTOR : D-04
AD
D-04(GR)
HARNESS
SIDE
D-04(GR)
31
32
41 40
33
34
36
37
35
43
46 45 44
39
42
38
47
AC204174
CONNECTOR : D-224
AD
D-224(B)
D-224(B)
HARNESS SIDE
21
23
24
22
32
3433
31
26
27
28
3029
38
39
40
36
37
25
35
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-298
HEADLIGHT AND TAILLIGHT
GENERAL DESCRIPTION CONCERNING HEADLIGHT AND TAILLIGHT
M1549021300060
The ECU related to the headlight and taillight types
and various control functions are as follows.
Taillights and headlights illumination
.
Taillight
The front ECU will light up the taillight when the taillight switch
signal from the column switch is in the "ON" state and the built-
in taillight replay is in the "ON" state.
NOTE: This item only considers the taillight lightup function and
does not take into consideration the other functions. In actual
driving, the taillights may be turned off due to the headlight
automatic shut-down function. For the details of the headlight
automatic shut-down function, refer to its Section.
.
Headlights and high-beam indicator light
The front ECU lights up the headlight (LO) when the signal from
the column switch to the headlight switch is in the "ON" state
and the built-in head light relay (LO) is in the "ON" state. If the
dimmer switch is turned on while the headlight relay (LO) is on,
the front-ECU turns on the headlight relay (HI), causing the
high-beam headlights to illuminate.
What's more, ETACS-ECU lights up the high beam indicator
light when the acknowledgment signal from the front ECU is in
the "HI-BEAM ACK" state or the head light switch signal from
the column switch is in the "PASS" state.
NOTE: This item only considers the headlight lightup function
and doesn't take into consideration the other functions. In
actual driving, the headlights may be turned off due to the
headlight automatic shut-down function. For the details of the
headlight automatic shut-down function, refer to its Section.
FUNCTION
CONTROL ECU
Taillight
Front-ECU, column switch
Headlights and high-beam indicator light
ETACS-ECU, front-ECU, column switch
Headlight automatic-shutdown function
ETACS-ECU, front-ECU, column switch
Dimmer automatic reset function
Front-ECU, column switch
Daytime running light function
Daytime running light-ECU
AC106502
ON
OFF
ON
OFF
Taillight
switch
Taillight
relay
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст