Mitsubishi Montero (2002-2004). Manual — part 189

TOWING AND HOISTING

TSB Revision

GENERAL <BODY AND CHASSIS>

00-25

TOWING AND HOISTING

M1001000800142

WRECKER TOWING RECOMMENDATION

.

FRONT TOWING PICKUP

CAUTION

Do not tow this vehicle with a wrecker using sling-type

equipment to prevent the bumper from deformation. If
this vehicle is towed, use wheel lift or flat bed equip-
ment.

Make sure that the transmission remains in the "N"

position.

For the four-wheel-drive vehicle, move the transfer shift

lever to "2H" position

The vehicle may be towed on its rear wheels for extended dis-
tances provided the parking brake is released. It is recom-
mended that vehicles be towed using the front pickup
whenever possible.

.

REAR TOWING PICKUP

CAUTION

This vehicle cannot be towed by a wrecker using sling-

type equipment to prevent the lower arm from deforma-
tion.If this vehicle is towed, use a wheel lift or flat bed
equipment.

Do not use the steering column lock to secure the front

wheel for towing.

For the four-wheel-drive vehicle, move the transfer shift

lever to "2H" position.

If these limits cannot be met, the front wheels must be

placed on a tow dolly.

Automatic transmission vehicle may be towed on the front
wheels at speeds not to exceed 50 km/h (30 mph) for distances
not to exceed 30 km (18 miles).

.

TOWING WHEN KEYS ARE NOT AVAILABLE
When a locked vehicle must be towed and keys are not avail-
able, the vehicle may be lifted and towed from the front, pro-
vided the parking brake is released. If not released, the rear
wheels should be placed on a tow dolly.

ACX00883AB

SLING TYPE

WHEEL LIFT TYPE

FLAT BED TYPE

NO

ACX00884 AB

SLING TYPE

WHEEL LIFT TYPE

FLAT BED TYPE

NO

TOWING AND HOISTING

TSB Revision

GENERAL <BODY AND CHASSIS>

00-26

HOISTING

.

EMERGENCY JACKING
Place a jack under one of the jacking points shown in the illus-
tration.

.

FLOOR JACK

CAUTION

A floor jack must never be used on any part of the

underbody.

Do not attempt to raise one entire side of the vehicle by

placing a jack midway between front and rear wheels.
This practice may result in permanent damage to the
body.

A regular floor jack may be used under the front crossmember
or rear frame.

.

ACX01548

JACKING
POINTS

JACKING
POINTS

FRONT

REAR

AB

ACX01698 AB

FRONT

REAR

TOWING AND HOISTING

TSB Revision

GENERAL <BODY AND CHASSIS>

00-27

POST TYPE

CAUTION

When service procedures require removal of the rear sus-
pension, the fuel tank or the spare tire, place additional
weight on the rear end of the vehicle or anchor the vehicle
to a hoist to prevent center of gravity changes.
Special care should be taken when raising the vehicle on a
frame contact type hoist. The hoist must be equipped with the
proper adapters in order to support the vehicle at the proper
locations shown in the illustration.
Conventional hydraulic hoists may be used after determining
that the adapter plates will make firm contact with the side
frame.

ACX01699

BOLTS

ATTACHMENT

ATTACHMENT

SIDE SILL REAR END

AB

GENERAL DATA AND SPECIFICATIONS

TSB Revision

GENERAL <BODY AND CHASSIS>

00-28

GENERAL DATA AND SPECIFICATIONS

M1001000900309

GENERAL SPECIFICATIONS

.

1

2

3

4

5

6

7

8

9

10

11

AC204542

ITEM

V77WLYHVL2M/3M

V77WLYXVL2M/3M

Vehicle dimensions
Overall length mm (in)

1

4,795 (188.7)

4,795 (188.7)

Overall width mm (in)

2

1,875 (73.8)

1,875 (73.8)

Overall height (unladen) mm (in)

3

1,885 (74.2)

1,885 (74.2)

Wheelbase mm (in)

4

2,780 (109.4)

2,780 (109.4)

Tread

− front mm (in)

5

1,560 (61.4)

1,560 (61.4)

Tread

− rear mm (in)

6

1,560 (61.4)

1,560 (61.4)

Overhang

− front mm (in)

7

710 (28.0)

710 (28.0)

Overhang

− rear mm (in)

8

1,305 (51.4)

1,305 (51.4)

Minimum running ground clearance
mm (in)

9

235 (9.3)

235 (9.3)

Angle of approach degrees

10 42

°

42

°

Angle of departure degrees

11

24

°

24

°

Vehicle weight kg (lb)
Curb weight

2,140 (4,718)

2,170 (4,784)

Gross vehicle weight rating

2,760 (6,085)

2,760 (6,085)

Gross axle weight rating - front

1,200 (2,646)

1,200 (2,646)

Gross axle weight rating - rear

1,650 (3,638)

1,650 (3,638)

Seating capacity

7

7

Engine
Model No.

6G75

6G75

Piston displacement

3.8L

3.8L

Transmission
Model No.

V5A51

V5A51

Type

5-speed automatic

5-speed automatic

Fuel system
Fuel supply system

Electronic-controlled multiport fuel injection

Была ли эта страница вам полезна?
Да!Нет
9 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности