Mitsubishi Montero (2002-2004). Manual — part 329
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-363
STEP 14. Check headlight (LH) bulb.
(1) Remove the headlight (LH) bulb.
(2) Verify that the headlight (LH) bulb is not damaged or burned
out.
Q: Is headlight (LH) bulb normal?
YES : Go to Step 15.
NO : Replace the headlight (LH) bulb. Verify that the
headlights illuminate normally.
STEP 15. Check headlight (LH) connector A-20 and front-
ECU connector A-07X for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are headlight (LH) connector A-20 and front-ECU
connector A-07X in good condition?
YES : Go to Step 16.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the headlights illuminate normally.
AC204183
CONNECTOR : A-07X
AB
2 1
3
4
6
7
8
9
5
11 10
RELAY BOX SIDE
AC204167
CONNECTOR : A-20
HARNESS
SIDE
A-20(B)
A-20(B)
AI
2
1
Y
3
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-364
STEP 16. Check the wiring harness between headlight (LH)
connector A-20 (terminal 3) and front-ECU connector A-
07X (terminal 2).
NOTE: Also check joint connector A-15 for loose, corroded, or
damaged terminals, or terminals pushed back in the connector.
If joint connector A-15 is damaged, Repair or replace the dam-
aged component(s) as described in GROUP 00E, Harness
Connector Inspection
.
Q: Is the wiring harness between headlight (LH) connector
A-20 (terminal 3) and front-ECU connector A-07X
(terminal 2) in good condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the headlights illuminate normally.
STEP 17. Check headlight (RH) bulb.
(1) Remove the headlight (RH) bulb.
(2) Verify that the headlight (RH) bulb is not damaged or
burned out.
Q: Is headlight (RH) bulb normal?
YES : Go to Step 18.
NO : Replace the headlight (RH) bulb. Verify that the
headlights illuminate normally.
AC204183
CONNECTOR : A-07X
AB
2 1
3
4
6
7
8
9
5
11 10
RELAY BOX SIDE
AC204185
CONNECTORS : A-15, A-20
A-20(B)
A-15
AB
A-15
HARNESS SIDE
A-20(B)
2
1
Y
3
14
13
4
1112
5
3
10
8 9
2
7
1
6
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-365
STEP 18. Check headlight (RH) connector A-32 and front-
ECU connector A-07X for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are headlight (RH) connector A-32 and front-ECU
connector A-07X in good condition?
YES : Go to Step 19.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the headlights illuminate normally.
STEP 19. Check the wiring harness between headlight (RH)
connector A-32 (terminal 3) and front-ECU connector A-
07X (terminal 2).
Q: Is the wiring harness between headlight (RH) connector
A-32 (terminal 3) and front-ECU connector A-07X
(terminal 2) in good condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the headlights illuminate normally.
AC204183
CONNECTOR : A-07X
AB
2 1
3
4
6
7
8
9
5
11 10
RELAY BOX SIDE
AC204166
CONNECTOR : A-32
HARNESS
SIDE
A-32(B)
A-32(B)
AE
2
1
Y
3
AC204183
CONNECTOR : A-07X
AB
2 1
3
4
6
7
8
9
5
11 10
RELAY BOX SIDE
AC204166
CONNECTOR : A-32
HARNESS
SIDE
A-32(B)
A-32(B)
AE
2
1
Y
3
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-366
Inspection Procedure J-8: Headlight and Taillight: The high-beam indicator light does not illuminate.
High-beam Indicator Light Circuit
ACX02274
FUSIBLE LINK (2)
AC
BATTERY
AC204170
CONNECTORS : D-04, D-28
BN
D-04(GR)
D-28
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст