Mitsubishi Montero (2002-2004). Manual — part 324
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-343
STEP 35. Check the wiring harness between rear light (RH)
connector G-12 (terminal 3) and ground.
NOTE: Also check intermediate connector F-10 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector F-10 is damaged, repair or
replace the damaged component(s) as described in GROUP
00E, Harness Connector Inspection
Q: Is the wiring harness between rear light (RH) connector
G-12 (terminal 3) and ground in good condition?
YES : Replace the rear combination light socket (RH). Verify
that the taillight (RH) illuminates normally.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the taillight (RH) illuminates normally.
AC204179
CONNECTOR : G-12
AF
HARNESS SIDE
G-12(B)
G-12(B)
3
4
2
1
AC204178
CONNECTOR : F-10
AD
F-10(GR)
F-10(GR)
3
1
2
4
5
6
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-344
STEP 36. Check rear light (RH) connector G-12 and front-
ECU connector A-07X for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are rear light (RH) connector G-12 and front-ECU
connector A-07X in good condition?
YES : Go to Step 37.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the taillight (RH) illuminates
normally.
AC204183
CONNECTOR : A-07X
AB
2 1
3
4
6
7
8
9
5
11 10
RELAY BOX SIDE
AC204179
CONNECTOR : G-12
AF
HARNESS SIDE
G-12(B)
G-12(B)
3
4
2
1
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-345
STEP 37. Check the wiring harness between rear light (RH)
connector G-12 (terminal 1) and front-ECU connector A-
07X (terminal 8).
AC204183
CONNECTOR : A-07X
AB
2 1
3
4
6
7
8
9
5
11 10
RELAY BOX SIDE
AC204179
CONNECTOR : G-12
AF
HARNESS SIDE
G-12(B)
G-12(B)
3
4
2
1
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-346
NOTE: Also check intermediate connectors D-28, D-111 and F-
10 for loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If intermediate connector D-28,
D-111 or F-10 is damaged, repair or replace the damaged com-
ponent(s) as described in GROUP 00E, Harness Connector
Inspection
.
Q: Is the wiring harness between rear light (RH) connector
G-12 (terminal 1) and front-ECU connector A-07X
(terminal 8) in good condition?
YES : Replace the rear light socket (RH). Verify that the
taillight (RH) illuminates normally.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the taillight (RH) illuminates normally.
STEP 38. Check the license plate light bulb.
(1) Remove the license plate light bulb.
(2) Verify that the license plate light bulb is not damaged or
burned out.
Q: Is the license plate light bulb in good condition?
YES : Go to Step 39.
NO : Replace the license plate light bulb. Verify that the
license plate light illuminate normally.
AC204170
CONNECTOR : D-28
AI
2 3
27
32
28
33
16
15
4 5
19
18
29
17
34
7 8
35
22
21
9 10
30
36
31
37
25
24
23
6
20
1
14
26
11
13
12
38
AC204171
CONNECTOR : D-111
AC
9
8
6 7
5
3 4
20
32
21
33
43
17 18
30
41
16
29
28
39 40
13
25
12
24
35 36
14
26
37
15
27
38
19
31
42
1
10
22
2
11
23
34
AC204178
CONNECTOR : F-10
AD
F-10(GR)
F-10(GR)
3
1
2
4
5
6
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст