Mitsubishi Montero (2002-2004). Manual — part 268
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-119
STEP 20. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 17) to back door lock actuator
connector I-05 (terminal 3).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
ACX02293
CONNECTOR: I-05
AM
I-05 (B)
1
2
3
4
5
6
I-05 (B)
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-120
NOTE: Also check junction block connector D-209 and inter-
mediate connector D-111 and G-10 for loose, corroded, or
damaged terminals, or terminals pushed back in the connector.
If junction block connector D-209 or intermediate connector D-
111 or G-10 is damaged, repair or replace the damaged com-
ponent(s) as described in GROUP 00E, Harness Connector
Inspection
.
Q: Is the harness wiring from ETACS-ECU connector D-222
(terminal 17) to back door lock actuator connector I-05
(terminal 3) in good condition?
YES : Go to Step 21.
NO : The harness wiring may be damaged or the
connectors may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the harness wiring as necessary. Verify that all
the doors (including the back door) can be locked and
unlocked normally.
AC203850
CONNECTOR: D-209
AE
D-209
D-209
JUNCTION BLOCK
(FRONT VIEW)
AC203860AC
D-111
CONNECTOR: D-111
D-111
AC204524
CONNECTOR: G-10
AC
G-10
G-10
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-121
STEP 21. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 4) to back door lock actuator
connector I-05 (terminal 2).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
ACX02293
CONNECTOR: I-05
AM
I-05 (B)
1
2
3
4
5
6
I-05 (B)
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-122
NOTE: Also check junction block connector D-209 and inter-
mediate connector D-111 and G-10 for loose, corroded, or
damaged terminals, or terminals pushed back in the connector.
If junction block connector D-209 or intermediate connector D-
111 or G-10 is damaged, repair or replace the damaged com-
ponent(s) as described in GROUP 00E, Harness Connector
Inspection
.
Q: Is the harness wiring from ETACS-ECU connector D-222
(terminal 4) to back door lock actuator connector I-05
(terminal 2) in good condition?
YES : Replace the ETACS-ECU. Verify that all the doors
(including the back door) can be locked and unlocked
normally.
NO : The harness wiring may be damaged or the
connectors may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the harness wiring as necessary. Verify that all
the doors (including the back door) can be locked and
unlocked normally.
AC203850
CONNECTOR: D-209
AE
D-209
D-209
JUNCTION BLOCK
(FRONT VIEW)
AC203860AC
D-111
CONNECTOR: D-111
D-111
AC204524
CONNECTOR: G-10
AC
G-10
G-10
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст