Mitsubishi Montero (2002-2004). Manual — part 992
SYMPTOM PROCEDURES <KEY INTERLOCK AND SHIFT LOCK MECHANISMS>
TSB Revision
SYMPTOM PROCEDURES
23Ad-79
DIAGNOSIS
STEP 1. Check the connection of lock cam and
key interlock cable.
Q: Is the connection of lock cam and key interlock
cable in good condition?
YES :
Go to Step 2.
NO :
Repair the connection of lock cam and shift
lock cable. When the brake pedal is
depressed with the ignition key at other
positions than "LOCK" (OFF) position,
check that the selector lever can be moved
from "P" position to "R" position.
STEP 2. Check the connection of selector lever
assembly and shift transmission control cable.
Q: Is the connection of selector lever assembly and
shift transmission control cable in good condition?
YES :
Go to Step 3.
NO :
Repair the connection of selector lever
assembly and shift transmission control
cable. When the brake pedal is depressed
with the ignition key at other positions than
"LOCK" (OFF) position, check that the
selector lever can be moved from "P"
position to "R" position.
STEP 3. Check the fit of the shift lock cable.
Q: Is the shift lock cable installed correctly?
YES :
Go to Step 4.
NO :
Install the shift lock cable correctly. Refer to
. When the brake pedal is
depressed with the ignition key at other
positions than "LOCK" (OFF) position,
check that the selector lever can be moved
from "P" position to "R" position.
STEP 4. Check the shift lock cable.
Q: Is the shift lock cable in good condition?
YES :
Go to Step 5.
NO :
Replace the shift lock cable. Refer to
. When the brake pedal is
depressed with the ignition key at other
positions than "LOCK" (OFF) position,
check that the selector lever can be moved
from "P" position to "R" position.
STEP 5. Check the fit of the key interlock cable.
Q: Is the key interlock cable installed correctly?
YES :
Go to Step 6.
NO :
Install the key interlock cable correctly.
Refer to
. When the brake pedal
is depressed with the ignition key at other
positions than "LOCK" (OFF) position,
check that the selector lever can be moved
from "P" position to "R" position.
STEP 6. Check the key interlock cable.
Q: Is the key interlock cable in good condition?
YES :
Go to Step 7.
NO :
Replace the key interlock cable. Refer to
. When the brake pedal is
depressed with the ignition key at other
positions than "LOCK" (OFF) position,
check that the selector lever can be moved
from "P" position to "R" position.
STEP 7. Check the fit of the transmission control
cable.
Q: Is the transmission control cable installed
correctly?
YES :
Go to Step 8.
NO :
Install the transmission control cable
correctly. Refer to
. When the
brake pedal is depressed with the ignition
key at other positions than "LOCK" (OFF)
position, check that the selector lever can
be moved from "P" position to "R" position.
STEP 8. Check the transmission control cable.
Q: Is the transmission control cable in good
condition?
YES :
Repair or replace the selector lever
assembly. Refer to
. When the brake pedal is depressed with
the ignition key at other positions than
"LOCK" (OFF) position, check that the
selector lever can be moved from "P"
position to "R" position.
NO :
Replace the transmission control cable.
Refer to
. When the brake pedal
is depressed with the ignition key at other
positions than "LOCK" (OFF) position,
check that the selector lever can be moved
from "P" position to "R" position.
SYMPTOM PROCEDURES <KEY INTERLOCK AND SHIFT LOCK MECHANISMS>
TSB Revision
SYMPTOM PROCEDURES
23Ad-80
INSPECTION PROCEDURE 3: Selector Lever can be Moved from "P" to "R" Position with Brake Pedal
Depressed when Ignition Key is at "LOCK" (OFF) Position.
.
TECHNICAL DESCRIPTION (COMMENT)
Key interlock cable or lock cam may be defective.
.
TROUBLESHOOTING HINTS
• Malfunction of lock cam
• Malfunction of key interlock cable
DIAGNOSIS
STEP 1. Check the connection of lock cam and
key interlock cable.
Q: Is the connection of lock cam and key interlock
cable in good condition?
YES :
Go to Step 2.
NO :
Repair the connection of lock cam and shift
lock cable. When the brake pedal is
depressed with the ignition key at the
"LOCK" (OFF) position, check that the
selector lever can not be moved from "P"
position to "R" position.
STEP 2. Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES :
Go to Step 3.
NO :
Install the lock cam correctly. Refer to
. When the brake pedal is
depressed with the ignition key at the
"LOCK" (OFF) position, check that the
selector lever can not be moved from "P"
position to "R" position.
STEP 3. Check the lock cam.
Q: Is the lock cam in good condition?
YES :
Go to Step 4.
NO :
Replace the lock cam. Refer to
When the brake pedal is depressed with the
ignition key at the "LOCK" (OFF) position,
check that the selector lever can not be
moved from "P" position to "R" position.
STEP 4. Check the fit of the key interlock cable.
Q: Is the key interlock cable installed correctly?
YES :
Go to Step 5.
NO :
Install the key interlock cable correctly.
Refer to
. When the brake pedal
is depressed with the ignition key at the
"LOCK" (OFF) position, check that the
selector lever can not be moved from "P"
position to "R" position.
STEP 5. Check the key interlock cable.
Q: Is the key interlock cable in good condition?
YES :
No action to be taken.
NO :
Replace the key interlock cable. Refer to
. When the brake pedal is
depressed with the ignition key at the
"LOCK" (OFF) position, check that the
selector lever can not be moved from "P"
position to "R" position.
INSPECTION PROCEDURE 4: Selector Lever cannot be Moved from "P" to "R" Position Smoothly.
.
TECHNICAL DESCRIPTION (COMMENT)
Key interlock cable, shift lock cable, transmission
control cable, lock cam, or selector lever assembly
may be defective.
.
TROUBLESHOOTING HINTS
• Malfunction of key interlock cable
• Malfunction of shift lock cable
• Malfunction of transmission control cable
• Malfunction of lock cam
• Malfunction of selector lever assembly
DIAGNOSIS
STEP 1. Check the connection of lock cam and
key interlock cable.
Q: Is the connection of lock cam and key interlock
cable in good condition?
YES :
Go to Step 2.
NO :
Repair the connection of lock cam and shift
lock cable. Check that the selector lever can
be moved from "P" position to "R" position
smoothly.
SYMPTOM PROCEDURES <KEY INTERLOCK AND SHIFT LOCK MECHANISMS>
TSB Revision
SYMPTOM PROCEDURES
23Ad-81
STEP 2. Check the connection of selector lever
assembly and transmission control cable.
Q: Is the connection of selector lever assembly and
transmission control cable in good condition?
YES :
Go to Step 3.
NO :
Repair the connection of selector lever
assembly and transmission control cable.
Check that the selector lever can be moved
from "P" position to "R" position smoothly.
STEP 3. Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES :
Go to Step 4.
NO :
Install the lock cam correctly. Refer to
. Check that the selector lever
can be moved from "P" position to "R"
position smoothly.
STEP 4. Check the lock cam.
Q: Is the lock cam in good condition?
YES :
Go to Step 5.
NO :
Replace the lock cam. Refer to
.
Check that the selector lever can be moved
from "P" position to "R" position smoothly.
STEP 5. Check the fit of the shift lock cable.
Q: Is the shift lock cable installed correctly?
YES :
Go to Step 6.
NO :
Install the shift lock cable correctly. Refer to
. Check that the selector lever
can be moved from "P" position to "R"
position smoothly.
STEP 6. Check the shift lock cable.
Q: Is the shift lock cable in good condition?
YES :
Go to Step 7.
NO :
Replace the shift lock cable. Refer to
. Check that the selector lever
can be moved from "P" position to "R"
position smoothly.
STEP 7. Check the fit of the key interlock cable.
Q: Is the key interlock cable installed correctly?
YES :
Go to Step 8.
NO :
Install the key interlock cable correctly.
Refer to
. Check that the selector
lever can be moved from "P" position to "R"
position smoothly.
STEP 8. Check the key interlock cable.
Q: Is the key interlock cable in good condition?
YES :
Go to Step 9.
NO :
Replace the key interlock cable. Refer to
. Check that the selector lever
can be moved from "P" position to "R"
position smoothly.
STEP 9. Check the fit of the transmission control
cable.
Q: Is the transmission control cable installed
correctly?
YES :
Go to Step 10.
NO :
Install the transmission control cable
correctly. Refer to
. Check that
the selector lever can be moved from "P"
position to "R" position smoothly.
STEP 10. Check the transmission control cable.
Q: Is the transmission control cable in good
condition?
YES :
Repair or replace the selector lever
assembly. Refer to
. Check that the selector lever can be
moved from "P" position to "R" position
smoothly.
NO :
Replace the transmission control cable.
Refer to
. Check that the selector
lever can be moved from "P" position to "R"
position smoothly.
INSPECTION PROCEDURE 5: Selector Lever cannot be Moved from "R" Position to "P" Position.
.
TECHNICAL DESCRIPTION (COMMENT)
Selector lever assembly, transmission control cable,
or lock cam may be defective.
.
TROUBLESHOOTING HINTS
• Malfunction of selector lever assembly
• Malfunction of transmission control cable
• Malfunction of lock cam
SYMPTOM PROCEDURES <KEY INTERLOCK AND SHIFT LOCK MECHANISMS>
TSB Revision
SYMPTOM PROCEDURES
23Ad-82
DIAGNOSIS
STEP 1. Check the connection of selector lever
assembly and transmission control cable.
Q: Is the connection of selector lever assembly and
transmission control cable in good condition?
YES :
Go to Step 2.
NO :
Repair the connection of selector lever
assembly and transmission control cable.
Check that the selector lever can be moved
from "R" position to "P" position.
STEP 2. Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES :
Go to Step 3.
NO :
Install the lock cam correctly. Refer to
. Check that the selector lever
can be moved from "R" position to "P"
position.
STEP 3. Check the lock cam.
Q: Is the lock cam in good condition?
YES :
Go to Step 4.
NO :
Replace the lock cam. Refer to
.
Check that the selector lever can be moved
from "R" position to "P" position.
STEP 4. Check the fit of the transmission control
cable.
Q: Is the transmission control cable installed
correctly?
YES :
Go to Step 5.
NO :
Install the transmission control cable
correctly. Refer to
. Check that
the selector lever can be moved from "R"
position to "P" position.
STEP 5. Check the transmission control cable.
Q: Is the transmission control cable in good
condition?
YES :
Repair or replace the selector lever
assembly. Refer to
. Check that the selector lever can be
moved from "P" position to "R" position
smoothly.
NO :
Replace the transmission control cable.
Refer to
. Check that the selector
lever can be moved from "R" position to "P"
position.
INSPECTION PROCEDURE 6: Ignition Key cannot be Turned to "LOCK" (OFF) Position when Selector
Lever is at "P" Position.
.
TECHNICAL DESCRIPTION (COMMENT)
Lock cam, steering lock cylinder assembly, transmis-
sion control cable, or key interlock cable may be
defective.
.
TROUBLESHOOTING HINTS
• Malfunction of lock cam
• Malfunction of key interlock cable
• Malfunction of transmission control cable
• Malfunction of steering lock cylinder assembly
DIAGNOSIS
STEP 1. Check the connection of lock cam and
key interlock cable.
Q: Is the connection of lock cam and key interlock
cable in good condition?
YES :
Go to Step 2.
NO :
Repair the connection of lock cam and shift
lock cable. Check that the ignition key can
not be turned to the "LOCK" (OFF) position
with the selector lever at "P" position.
STEP 2. Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES :
Go to Step 3.
NO :
Install the lock cam correctly. Refer to
. Check that the selector lever
can be moved from "R" position to "P"
position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст