Mitsubishi Pajero Pinin. Manual — part 272
BODY –
Window Glass
42-14
QUARTER WINDOW GLASS
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D
Quarter Trim, Lower (R.H.) Removal and
Installation (Refer to GROUP 52A.)
D
Headlining Removal and Installation
(Refer to GROUP 52A.)
W0390AL
1
2
2
3
A
A
Primer
B
B
C
C
D
D
Section A – A
Section B – B
Section C – C
mm
Section D – D
Primer
Primer
Primer
12.5
12.5
15
15
12.5
12.5
18.5
3, 7
3
3, 7
3, 7
2, 6
Adhesive: 3M ATD Part No. 8609 Super Fast Urethane Auto Glass Sealant or equivalent
00008893
Removal steps
A
A
" "
A
A
1. Quarter window glass
"
A
A
2. Dual lock fastener
"
A
A
3. Window dam
BODY –
Window Glass
42-15
REMOVAL SERVICE POINT
A
A
"
QUARTER WINDOW GLASS REMOVAL
Remove the quarter window glass in the same manner as
for the windshild. (Refer to P.42-11.)
INSTALLATION SERVICE POINT
"
A
A
WINDOW DAM/DUAL LOCK FASTENER/
QUARTER WINDOW GLASS INSTALLATION
1.
Use a isopropyl alcohol to decrease the glass and body
surfaces where the window dam and dual lock fasteners
are installed.
2.
Install the window dam.
3.
Install the dual lock fasteners to the body flange in the
specified positions.
4.
Install the dual lock fasteners to the windshield in the
positions corresponding to the ones on the body flange
where the dual lock fasteners have been installed.
5.
Apply the primer and adhesive.
6.
Install the glass in the same manner as for the windshield.
(Refer to P.42-12.)
Dual lock
fastener
Dual lock fastener
installation positions
Glass end line
Side panel
flange end line
Align the dual
lock fastener end
and the marking.
: Dual lock fastener installation positions
BODY –
Window Glass
42-16
BACK DOOR GLASS
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D
High-mounted Stop Lamp Assembly Removal and
Installation (Refer to GROUP 52A.)
D
Back Door Trim Removal and Installation (Refer
to P.42-34.)
Adhesive: 3M ATD Part No. 8609 Super Fast Urethane Auto Glass Sealant or equivalent
Removal steps
1. Harness connector
A
A
" "
A
A
2. Back door glass
"
A
A
3. Dual lock fastener
"
A
A
4. Glass stopper
Remove the back door glass in the same manner as for the
windshield. (Refer to P42-11.)
WINDOW DAM/DUAL LOCK FASTENER/GLASS
STOPPER/BACK DOOR GLASS INSTALLATION
Apply the primer and adhesive.
Install the glass in the same manner as for the windshield.
(Refer to P.42–12.)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст