Mitsubishi Eclipse. Manual — part 711
![](/vehicles/winoney/grold/thow/stoint.png)
32-1
GROUP 32
POWER PLANT
MOUNT
CONTENTS
GENERAL DESCRIPTION. . . . . . . . .
SPECIAL TOOLS. . . . . . . . . . . . . . . .
ENGINE MOUNTING . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION . . . . . . . . . . . . . . . . . . . . . . .
TRANSAXLE MOUNTING . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
ENGINE ROLL STOPPER AND
CENTERMEMBER . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
CROSSMEMBER* . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
CROSSMEMBER BUSHING
REPLACEMENT . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . .
FASTENER TIGHTENING
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . .
SERVICE SPECIFICATION . . . . . . . . . . . .
WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
WARNING
•
Improper service or maintenance of any component of the SRS, or any SRS-related component, can lead to
personal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and
passenger (from rendering the SRS inoperative).
•
Service or maintenance of any SRS component or SRS-related component must be performed only at an
authorized MITSUBISHI dealer.
•
MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B - Supplemental
Restraint System (SRS) before beginning any service or maintenance of any component of the SRS or any
SRS-related component.
NOTE
The SRS includes the following components: SRS air bag control unit, SRS warning light, front impact sensors, air bag module,
clock spring, and interconnecting wiring. Other SRS-related components (that may have to be removed/installed in connection
with SRS service or maintenance) are indicated in the table of contents by an asterisk (*).
![](/vehicles/winoney/grold/thow/qulamaras.png)
GENERAL DESCRIPTION
TSB Revision
POWER PLANT MOUNT
32-2
GENERAL DESCRIPTION
M1321000100339
The engine-transaxle mount is of an inertial axis sup-
porting type whose excellent features have already
been proven in many Mitsubishi vehicles. The inertial
axis supporting type mount supports the front upper
part of the engine at the front and the rear upper part
of the transaxle at the rear. This arrangement effec-
tively suppresses the engine vibration.
CONSTRUCTION DIAGRAM
AC000298
FRONT
FRONT
ENGINE MOUNT
ENGINE MOUNT
ENGINE MOUNT
ENGINE MOUNT
CROSSMEMBER
CROSSMEMBER
CROSSMEMBER
CROSSMEMBER
CENTERMEMBER
CENTERMEMBER
CENTERMEMBER
CENTERMEMBER
FRONT ROLL
STOPPER
FRONT ROLL
STOPPER
FRONT ROLL
STOPPER
FRONT ROLL STOPPER
TRANSAXLE MOUNT
TRANSAXLE MOUNT
TRANSAXLE MOUNT
TRANSAXLE
MOUNT
REAR ROLL
STOPPER
REAR ROLL
STOPPER
REAR ROLL
STOPPER
REAR ROLL
STOPPER
DYNAMIC DAMPER
DYNAMIC DAMPER
ENGINE MOUNT STAY
ENGINE
MOUNT
STAY
<2.4L ENGINE>
<3.0L ENGINE>
AB
![](/vehicles/winoney/grold/thow/yons.png)
SPECIAL TOOLS
TSB Revision
POWER PLANT MOUNT
32-3
SPECIAL TOOLS
M1321000600334
TOOL
TOOL NUMBER
AND NAME
SUPERSESSION
APPLICATION
MB991453
Engine hanger
assembly
MZ203827-01
When an engine lifer is used:
Supporting the engine assembly
during remove and installation of
the transaxle mounting
GENERAL SERVICE
TOOL
MZ203827
Engine lifter
General service tool
MB991454
Engine hanger
MZ203827-01
When the engine hanger is
used:
Supporting the engine assembly
during remove and installation of
the transaxle mounting
NOTE: Special tool MB991454
is a part of engine hanger
attachment set MB991453.
MB991895
Engine hanger
−
MB991928
Engine hanger
A: MB991929
Joint (50)
×2
B: MB991930
Joint (90)
×2
C: MB991931
Joint (140)
×2
D: MB991932
Foot (standard)
×4
E: MB991933
Foot (short)
×2
F: MB991934
Chain and hook
assembly
−
MB991045
Bushing remover and
installer
Tool not available
Driving out and press-fitting of
crossmember bushings A and B
B991453
MZ203827
B991454
MB991895
B991928
A
B
C
D
E
F
SLIDE BRACKET (HI)
MB991045
![](/vehicles/winoney/grold/thow/chint.png)
ENGINE MOUNTING
TSB Revision
POWER PLANT MOUNT
32-4
ENGINE MOUNTING
REMOVAL AND INSTALLATION
M1321001100213
CAUTION
Mounting locations marked by
*
should be provisionally tightened, and then fully tightened after plac-
ing the vehicle horizontally and loading the full weight of the engine on the vehicle body.
MB990828
Bushing remover and
installer
Tool not available
Driving out and press-fitting of
crossmember bushing C
TOOL
TOOL NUMBER
AND NAME
SUPERSESSION
APPLICATION
MB990828
Pre-removal and Post-installation Operation
• Jack Up the Engine and Transmission Assembly Until There is no Weight on the Engine Mount Bracket Insulator.
• Reserve Tank Removal and Installation (Refer to GROUP 14, Radiator
AC000299
5
5
4
3
1
2
6
4
5
5
81 ± 12 N·m*
60 ± 9 ft-lb*
81 ± 12 N·m*
60 ± 9 ft-lb*
86 ± 12 N·m
64 ± 8 ft-lb
86 ± 12 N·m
64 ± 8 ft-lb
36 ± 6 N·m
27 ± 4 ft-lb
4.9 ± 1.0 N·m
44 ± 8 in-lb
N
AB
<2.4L ENGINE>
<3.0L ENGINE>
3
86 ± 12 N·m
64 ± 8 ft-lb
REMOVAL STEPS
1.
SUCTION HOSE <3.0L
ENGINE>
2.
ENGINE MOUNT STAY <3.0L
ENGINE>
3.
ENGINE MOUNT INSULATOR
MOUNTING BOLT
4.
ENGINE MOUNT BRACKET
>>A<<
5.
ENGINE MOUNT STOPPER
6.
DYNAMIC DAMPER <3.0L
ENGINE>
REMOVAL STEPS (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст