Mitsubishi Eclipse. Manual — part 844
![](/vehicles/winoney/grold/thow/res.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-385
PCM TERMINAL VOLTAGE REFERENCE CHART FOR TRANSAXLE OPERATION
M1231008400275
AC305281AB
C-50 <2.4L ENGINE> OR
C-52 <3.0L ENGINE>
C-54 <2.4L ENGINE> OR
C-55 <3.0L ENGINE>
C-57 <2.4L ENGINE> OR
C-59 <3.0L ENGINE>
C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
TERMINAL
NO.
INSPECTION ITEMS
INSPECTION REQUIREMENT
NORMAL CONDITION
45
Crankshaft position
sensor
Engine: Idling
1.5
− 2.5 V
46
TP sensor supplied
voltage
Ignition switch: ON
4.9
− 5.1 V
50
A/T control relay
Ignition switch: LOCK (OFF)
1 V or less
Ignition switch: ON
10
− 12 V
57
TP sensor ground
Always
0.5 V or less
75
Auto-cruise signal
Ignition switch: ON
Battery positive voltage
76
Ground
Always
1 V or less
77
Solenoid valve power
supply
Ignition switch: LOCK (OFF)
1 V or less
Ignition switch: ON
Battery positive voltage
78
TP sensor
Ignition switch: ON (check
for smooth voltage increase
as throttle is moved from idle
position to wide open throttle
Idle
0.6
− 0.8 V
Wide open
throttle
4.5
− 5.5 V
80
Vehicle speed signal
• Measure between terminals 80 and
ground with an oscilloscope.
• Engine: 2,000 r/min
• Selector lever position: 3 (3rd gear)
<Vehicles without sport mode>, Sport
mode (3rd gear) <Vehicles with sport
mode>
Refer to
,
Inspection Procedure
Using an Oscilloscope.
88
Ground
Always
1 V or less
89
Solenoid valve power
supply
Ignition switch: LOCK (OFF)
1 V or less
Ignition switch: ON
Battery positive voltage
97
Ground
Always
1 V or less
101
Transmission range
switch: P
• Ignition switch: ON
• Selector lever position: P
Battery positive voltage
• Ignition switch: ON
• Selector lever position: Other than
above
1 V or less
102
Transmission range
switch: D
• Ignition switch: ON
• Selector lever position: D
Battery positive voltage
• Ignition switch: ON
• Selector lever position: Other than
above
1 V or less
![](/vehicles/winoney/grold/thow/myen.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-386
103
Input shaft speed
sensor
• Measure between terminals 16 and
103 with an oscilloscope.
• Engine: 2,000 r/min
• Gear range: 3rd gear
Refer to
,
Inspection Procedure
Using an Oscilloscope.
104
Output shaft speed
sensor
• Measure between terminals 16 and
104 with an oscilloscope.
• Engine: 2,000 r/min
• Gear range: 3rd gear
Refer to
,
Inspection Procedure
Using an Oscilloscope.
105
Shift indicator light: 1st
<Vehicles with sport
mode>
• Engine: Idling
• Gear range: 1st gear
Battery positive voltage
• Engine: Idling
• Gear range: other than 1st gear
0
− 0.9 V
106
Second solenoid valve
• Gear range: 2nd gear
Battery positive voltage
• Engine: Idling
• Selector lever position: P
6
− 9 V
107
Torque converter clutch
solenoid valve
• Engine: Idling
• Gear range: 1st gear
Battery positive voltage
108
Transmission range
switch: R
• Ignition switch: ON
• Selector lever position: R
Battery positive voltage
• Ignition switch: ON
• Selector lever position: Other than
above
1 V or less
109
Transmission range
switch: 3 <Vehicles
without sport mode>
• Ignition switch: ON
• Selector lever position: 3
Battery positive voltage
• Ignition switch: ON
• Selector lever position: Other than
above
1 V or less
Select switch <Vehicles
with sport mode>
• Ignition switch: ON
• Selector lever position: Sport mode
Battery positive voltage
• Ignition switch: ON
• Selector lever position: Other than
above
1 V or less
110
Transmission range
switch: L <Vehicles
without sport mode>
• Ignition switch: ON
• Selector lever operation: L
Battery positive voltage
• Ignition switch: ON
• Selector lever operation: Other than
above
1 V or less
Select switch (Down)
<Vehicles with sport
mode>
• Ignition switch: ON
• Selector lever operation: Downshift and
hold the selector lever
Battery positive voltage
• Ignition switch: ON
• Selector lever operation: Other than
above
1 V or less
TERMINAL
NO.
INSPECTION ITEMS
INSPECTION REQUIREMENT
NORMAL CONDITION
![](/vehicles/winoney/grold/thow/angh.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-387
117
Shift indicator light: 3rd
<Vehicles with sport
mode>
• Engine: Idling
• Gear range: 3rd gear
Battery positive voltage
• Engine: Idling
• Gear range: other than 3rd gear
0
− 0.9 V
118
Shift indicator light: 2 nd
<Vehicles with sport
mode>
• Engine: Idling
• Gear range: 2nd gear
Battery positive voltage
• Engine: Idling
• Gear range: other than 2nd gear
0
− 0.9 V
120
Under drive solenoid
valve
• Engine: Idling
• Gear range: 1st gear
Battery positive voltage
• Engine: Idling
• Selector lever position: P
6
− 9 V
121
Transmission range
switch: N
• Ignition switch: ON
• Selector lever position: N
Battery positive voltage
• Ignition switch: ON
• Selector lever position: Other than
above
1 V or less
122
Park/Neutral position
switch: 2 <Vehicles
without sport mode>
• Ignition switch: ON
• Selector lever operation: 2
Battery positive voltage
• Ignition switch: ON
• Selector lever operation: Other than
above
1 V or less
Select switch (Up)
<Vehicles with sport
mode>
• Ignition switch: ON
• Selector lever operation: Upshift and
hold the selector lever
Battery positive voltage
• Ignition switch: ON
• Selector lever operation: Other than
above
1 V or less
123
Stoplight switch
• Ignition switch: ON
• Brake pedal: Depressed
Battery positive voltage
• Ignition switch: ON
• Brake pedal: Released
1 V or less
124
Transmission fluid
temperature sensor
• Ignition switch: ON
• Transmission fluid temperature: 20°C
(68
°F)
3.8
− 4.0 V
• Ignition switch: ON
• Transmission fluid temperature: 40°C
(104
°F)
3.2
− 3.4 V
• Ignition switch: ON
• Transmission fluid temperature: 80°C
(176
°F)
1.7
− 1.9 V
128
Shift indicator light: 4th
<Vehicles with sport
mode>
• Engine: Idling
• Gear range: 4th gear
Battery positive voltage
• Engine: Idling
• Gear range: other than 4th gear
0
− 0.9 V
TERMINAL
NO.
INSPECTION ITEMS
INSPECTION REQUIREMENT
NORMAL CONDITION
![](/vehicles/winoney/grold/thow/eay.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-388
PCM TERMINAL RESISTANCE AND CONTINUITY INSPECTION CHART
M1231013400185
129
Low-reverse solenoid
valve
• Engine: Idling
• Selector lever position: P
Battery positive voltage
• Engine: Idling
• Gear range: 2nd gear
6
− 9 V
130
Overdrive solenoid
valve
• Gear range: 3rd gear
Battery positive voltage
• Engine: Idling
• Selector lever position: P
6
− 9 V
TERMINAL
NO.
INSPECTION ITEMS
INSPECTION REQUIREMENT
NORMAL CONDITION
AC305534AB
C-50 <2.4L ENGINE> OR
C-52 <3.0L ENGINE>
C-54 <2.4L ENGINE> OR
C-55 <3.0L ENGINE>
C-57 <2.4L ENGINE> OR
C-59 <3.0L ENGINE>
C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
TERMINAL
NO.
INSPECTION ITEM
NORMAL CONDITION (CHECK CONDITION)
57
− 124
Transmission fluid temperature
sensor
16.7
− 20.5 kΩ [at 0°C (32°F)]
7.3
− 8.9 kΩ [at 20°C (68°F)]
3.4
− 4.2 kΩ [at 40°C (104°F)]
1.9
− 2.2 kΩ [at 60°C (140°F)]
1.0
− 1.2 kΩ [at 80°C (176°F)]
0.57
− 0.69 kΩ [at 100°C (212°F)]
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст