Mitsubishi Lancer Evolution X. Manual — part 640
![](/vehicles/winoney/ifonan/iri/aza.png)
TRANSAXLE
TSB Revision
TWIN CLUTCH SST OVERHAUL
22D-17
2. Use special tool MB992312 to install the oil seal to the
transaxle.
.
>>J<< V RING INSTALLATION
1. Clean the spline with a brush or the like.
2. Apply the transaxle oil to the special tool MB992314.
Insert the V ring to the special tool MB992314, and install
the V ring.
3. Check that the V ring is installed securely.
AK802300
MB992312
AC
AK802292
AK802441
MB992314
AC
![](/vehicles/winoney/ifonan/iri/xph.png)
TRANSFER
TSB Revision
TWIN CLUTCH SST OVERHAUL
22D-18
TRANSFER
DISASSEMBLY AND ASSEMBLY
M1222004000619
Required special tools:
• MD998382: Crankshaft front oil seal installer
• MD998550: Extension housing seal installer
AK800089
AF
3
5
2
4
1
6
9.0 ± 2.0 N·m
80 ± 18 in-lb
Removal steps
1. O-ring
>>C<<
2. Oil seal
3. Dust seal guard
>>B<<
4. Oil seal
>>A<<
5. Cover
6. Transfer
Removal steps (Continued)
![](/vehicles/winoney/ifonan/iri/wowanofteved.png)
TRANSFER
TSB Revision
TWIN CLUTCH SST OVERHAUL
22D-19
ASSEMBLY SERVICE POINT
.
>>A<< COVER INSTALLATION
1. Completely degrease the FIPG-applied surface so that
water and oil including the old sealant cannot adhere to the
surface coated with the sealant.
Never touch the degreased surface by hand.
2. Apply a 1.5 mm (0.06 in) diameter bead of sealant as
illustrated onto the cover.
Specified sealant: Mitsubishi Part No. MD997740 or
equivalent
3. Attach the cover to the transfer and tighten it to the specified
torque.
.
>>B<< OIL SEAL INSTALLATION
1. Using the special tool MD998382, to install the oil seal.
2. Apply transfer oil to the lip of oil seal.
.
>>C<< OIL SEAL INSTALLATION
1. Using the special tool MD998550, to install the oil seal.
2. Apply specified grease to the oil seal lip area.
Specified grease: Retinax A
AK602385AD
AK800088
MD998382
AD
AK800087
MD998550
AD
NOTES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст