Mitsubishi Galant. Manual — part 635

RADIO WITH TAPE PLAYER AND CD PLAYER

TSB Revision

CHASSIS ELECTRICAL

54A-93

Inspection Procedure 2: No sound. <vehicles with amplifier>

AC003975

Amplifier Power Supply Circuit

AB

AC003723 AB

BATTERY

FUSIBLE LINK (3)

AC003079 AB

CONNECTOR
BLOCK (LH)

CONNECTOR: C-66

TSB Revision

CHASSIS ELECTRICAL

RADIO WITH TAPE PLAYER AND CD PLAYER

54A-94

CIRCUIT OPERATION
Power is supplied to the amplifier when the fusible
link (3).

TECHNICAL DESCRIPTION (COMMENT)
The cause is probably a faulty amplifier power supply
circuit system.

TROUBLESHOOTING HINTS

Damaged harness wire or connector.

Damaged DIN cable.

Malfunction of the amplifier.

Malfunction of the radio, tape player, CD player
and CD auto changer.

DIAGNOSIS

Required Special Tool:

MB991223: Harness set

STEP 1. Check the amplifier power supply circuit by
backprobing.
(1) Do not disconnect amplifier connector D-17.
(2) Measure the voltages between terminal 2, 10 and ground

by backprobing.

Q: Are the voltages approximately 12 volts (battery

positive voltage)?
YES :
Go to Step 4.
NO : Go to Step 2.

STEP 2. Check amplifier connector D-17 for damage.
Q: Is amplifier connector D-17 in good condition?

YES : Go to Step 3.
NO : Repair or replace it. Refer to GROUP 00E, Harness

Connector Inspection

P.00E-2

. The speakers should

sound.

AC003415AH

CONNECTOR: C-69

CONNECTOR
BLOCK (RH)

AC003689

CONNECTOR: D-17

AB

AC003704 AC

CONNECTOR D-17

(HARNESS SIDE)

AC003689

CONNECTOR: D-17

AB

RADIO WITH TAPE PLAYER AND CD PLAYER

TSB Revision

CHASSIS ELECTRICAL

54A-95

STEP 3. Check the harness wires between amplifier
connector D-17 and fusible link (3).
NOTE: After inspecting intermediate connector C-66 and C-69,
inspect the wires. If intermediate connector C-66 and C-69 are
damaged, repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection

P.00E-2

.

Q: Are the harness wires between amplifier connector D-17

and fusible link (3) in good condition?
YES :
There is no action to be taken.
NO : Repair them. The speakers should sound.

AC003723 AB

BATTERY

FUSIBLE LINK (3)

AC003689

CONNECTOR: D-17

AB

AC003079 AB

CONNECTOR
BLOCK (LH)

CONNECTOR: C-66

AC003415AH

CONNECTOR: C-69

CONNECTOR
BLOCK (RH)

TSB Revision

CHASSIS ELECTRICAL

RADIO WITH TAPE PLAYER AND CD PLAYER

54A-96

STEP 4. Check amplifier connector D-17 for damage.
Q: Is amplifier connector D-17 in good condition?

YES : Go to Step 5.
NO : Repair or replace it. Refer to GROUP 00E, Harness

Connector Inspection

P.00E-2

. The speakers should

sound.

STEP 5. Check the harness wires between amplifier
connector D-17 and ground.
Q: Are the harness wires between amplifier connector D-17

and ground in good condition?
YES :
Go to Step 6.
NO : Repair them. The speakers should sound.

STEP 6. Check the DIN cable between amplifier and radio,
tape player and CD auto changer.

Q: Are the DIN cable in good condition?

YES : Repair or replace the amplifier or radio, tape player,

CD player and CD auto changer. The speakers
should sound.

NO : Repair or replace it. The speakers should sound.

AC003689

CONNECTOR: D-17

AB

AC003689

CONNECTOR: D-17

AB

Была ли эта страница вам полезна?
Да!Нет
7 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности