Mitsubishi Galant. Manual — part 691
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-159
STEP 2. Check the dome light connector D-06 and ETACS-
ECU connectors C-86 for damage.
Q: Are dome light connector D-06 and ETACS-ECU
connectors C-86 in good condition?
YES : Go to Step 3.
NO : Repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
. The dome
lights should illuminate normally.
STEP 3. Check the harness wire between dome light
connector D-06 and ETACS-ECU connectors C-86.
Q: Is the harness wire between dome light connector D-06
and ETACS-ECU connectors C-86 in good condition?
YES : Replace the ETACS-ECU. The dome lights should
illuminate normally.
NO : Repair it. The dome lights should illuminate normally.
AC003080 AD
JUNCTION BLOCK
(REAR VIEW)
CONNECTOR: C-86
AC003176 AB
CONNECTOR: D-06
AC003080 AD
JUNCTION BLOCK
(REAR VIEW)
CONNECTOR: C-86
AC003176 AB
CONNECTOR: D-06
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-160
Inspection Procedure L-2: Dome light: Dome light dimming function does not work normally.
TECHNICAL DESCRIPTION (COMMENT)
The ETACS-ECU dims the dome light according to
the input signals form the following switches :
TROUBLESHOOTING HINTS
•
Malfunction of the dome light
•
Malfunction of the ETACS-ECU
•
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
•
MB991223: Test Harness Set
•
MB991502: Scan Tool (MUT-II)
•
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the trouble symptom.
Q: Does the dome light illuminate when the dome light
switch is turned to "ON" position?
YES : Go to Step 6.
NO : Go to Step 2.
STEP 2. Check the dome light connector D-06 for damage.
Q: Are dome light connector D-06 in good condition?
YES : Go to Step 3.
NO : Repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
. The dome
lights should illuminate normally.
AC003080 AD
JUNCTION BLOCK
(REAR VIEW)
CONNECTOR: C-86
AC003176 AB
CONNECTOR: D-06
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-161
STEP 3. Check the harness wire between dome light
connector D-06 and battery.
NOTE: After checking junction block connector C-76 and C-84
and intermediate connector C-66, check the wires. If junction
block connector C-76 and C-84 and intermediate connector C-
66 are damaged, repair or replace it. Refer to GROUP 00E,
Harness Connector Inspection
Q: Is the harness wire between dome light connector D-06
and battery in good condition?
YES : Go to Step 4.
NO : Repair it. The interior dome should illuminate
normally.
AC003176 AB
CONNECTOR: D-06
AC003079 AB
CONNECTOR
BLOCK (LH)
CONNECTOR: C-66
AC003082 AU
CONNECTOR: C-76
JUNCTION BLOCK
(FRONT VIEW)
AC003080 AB
JUNCTION BLOCK
(REAR VIEW)
CONNECTOR: C-84
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-162
STEP 4. Check the dome light connector D-06 for damage.
Q: Are dome light connector D-06 in good condition?
YES : Go to Step 5.
NO : Repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
. The dome
lights should illuminate normally.
STEP 5. Check the harness wire between dome light
connector D-06 and ground.
NOTE: After checking junction block connector C-73 and C-76 ,
check the wires. If junction block connector C-73 and C-76 are
damaged, repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
Q: Is the harness wire between dome light connector D-06
and ground in good condition?
YES : Replace the ETACS-ECU. The dome lights should
illuminate normally.
NO : Repair it. The interior dome should illuminate
normally.
AC003176 AB
CONNECTOR: D-06
AC003176 AB
CONNECTOR: D-06
AC003082 AN
CONNECTORS: C-73, C-76
C-73
JUNCTION BLOCK
(FRONT VIEW)
C-76
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст