Mitsubishi Galant (2004+). Manual — part 15
FENDER SHIELD
TSB Revision
WELDED PANEL REPLACEMENT
3-7
NOTE ON REPAIR WORK
.
REMOVAL
The welding point between front sidemember inner and front
sidemember rear A is hidden by the dash crossmember exten-
sion upper. Therefore, when removing the front sidemember,
remove the dash crossmember extension upper in advance.
.
AB301089AB
K
L
M
N
N
L
(WITH THE FRONT SIDEMEMBER REMOVED)
AB200702
DASH CROSSMEMBER
EXTENSION UPPER
AB
FENDER SHIELD
TSB Revision
WELDED PANEL REPLACEMENT
3-8
INSTALLATION
1. Remove the dash crossmember extension upper from the
new front sidemember.
2. Adhere in advance adhesives in the areas shown in the
figure of the instructions when assembling the front fender
shield.
3. Adhere in advance adhesives in the areas shown in the
figure of the instructions when assembling the upper frame.
ADHESIVE TYPE
BRAND
Epoxyayresin
adhesive
3M
ä AAD Part No.8115 or
equivalent
ADHESIVE TYPE
BRAND
Epoxyayresin
adhesive
3M
ä AAD Part No.8115 or
equivalent
AB200704
DASH
CROSSMEMBER
EXTENSION UPPER
AB
AB301097
: ADHESIVE
AB
AB301096AB
: ADHESIVE
FENDER SHIELD
TSB Revision
WELDED PANEL REPLACEMENT
3-9
NOTES
FRONT SIDEMEMBER (PARTIAL REPLACEMENT)
TSB Revision
WELDED PANEL REPLACEMENT
3-10
FRONT SIDEMEMBER (PARTIAL REPLACEMENT)
M4030000100108
NOTE: Refer to the Headlight Support Section on
for the welding point with headlight support.
AB301334
SYMBOL
OPERATION DESCRIPTION
Spot welding
MIG plug welding : indicates two panels to be welded
: indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent application locations
(Use access holes to apply liberally to butt-welded joints.)
( )
AB
AB301335
AB
130 mm
(5.1 in)
SERVICE HOLE
REPAIR WELDS
A
B
A
B
165 mm
(6.5 in)
WATER DRAINING HOLE
35 mm
(1.38 in)
65 mm
(2.56 in)
SERVICE HOLE
RIGHT SIDE
LEFT SIDE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст