Mitsubishi Galant 9G. Manual — part 1606
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-8
HOW TO DIAGNOSE THE CAN BUS LINE
Required Special Tools:
• MB991958: Scan Tool (MUT-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: MUT-III USB Cable
• MB991910: MUT-III Main Harness A
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "CAN bus diagnosis" from the start-up screen.
4. When the vehicle information is displayed, confirm that it
matches the vehicle whose CAN bus lines will be
diagnosed.
• If they match, go to step 8.
• If not, go to step 5.
5. Select "view vehicle information" button.
6. When the vehicle information is displayed, confirm again
that it matches the vehicle which is being diagnosed.
• If they match, go to step 8.
• If not, go to step 5.
7. Press the "OK" button.
8. When the options are displayed, choose the options (mark
the check) and then select "OK".
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-9
DIAGNOSTIC TROUBLE CODE CHART
M1352011300601
CAUTION
During diagnosis, a DTC code associated with
another system may be set when the ignition
switch is turned on with connector(s) discon-
nected. On completion, confirm all systems for
DTCs. If DTC code(s) are set, erase them all.
Follow the inspection chart that is appropriate for the
diagnostic trouble code.
DTC
INSPECTION ITEM
DIAGNOSTIC CONTENT
REFERENCE PAGE
C1200
Front right wheel speed sensor Open circuit or short circuit
C1201
Front right wheel speed sensor Abnormal output signal
C1205
Front left wheel speed sensor
Open circuit or short circuit
C1206
Front left wheel speed sensor
Abnormal output signal
C1210
Rear right wheel speed sensor
Open circuit or short circuit
C1211
Rear right wheel speed sensor
Abnormal output signal
C1215
Rear left wheel speed sensor
Open circuit or short circuit
C1216
Rear left wheel speed sensor
Abnormal output signal
C1226
ABS front right solenoid valve (pressure holding system)
C1231
ABS front right solenoid valve (depressurizing system)
C1236
ABS front left solenoid valve (pressure holding system)
C1241
ABS front left solenoid valve (depressurizing system)
C1246
ABS rear right solenoid valve (pressure holding system)
C1251
ABS rear right solenoid valve (depressurizing system)
C1256
ABS rear left solenoid valve (pressure holding system)
C1261
ABS rear left solenoid valve (depressurizing system)
C1266
Motor system (seizure)
C1273
Motor relay problem (stays off)
C1274
Motor relay problem (stays on)
C1278
Valve relay problem (stays off) or ABS-ECU power supply
system problem
C1279
Valve relay problem (stays on)
C1395
Brake fluid filling not completed
C1396*
Engine torque input refusal
GROUP 13D,
Diagnostic Trouble Code
Procedures
C1397*
Transmission range switch input refusal
GROUP 13D,
Diagnostic Trouble Code
Procedures
C1607
Trouble in ABS-ECU
C1860
Power supply system
Abnormal rise in voltage
C1861
Power supply system
Abnormal drop in voltage
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-10
NOTE: Since the ABS system is controlled with the same ABS/TCL-ECU used to control the TCL system, the
codes (with a *) used only for the ABS system also appear.
The inspection contents for the codes (with a *) used only for the TCL system do not described in this group.
DIAGNOSTIC TROUBLE CODE PROCEDURES
DTC C1200/C1205/C1210/1215 Wheel Speed Sensor (Open circuit or short circuit)
U1073
Bus off
U1100*
CAN communications system time out error engine related
data
GROUP 13D,
Diagnostic Trouble Code
Procedures
U1101*
CAN communications system time out error A/T related data
GROUP 13D,
Diagnostic Trouble Code
Procedures
U1120*
CAN communications system TCL uncontrollable by engine
malfunction
GROUP 13D,
Diagnostic Trouble Code
Procedures
U1400*
Dynamic range error APS1
GROUP 13D,
Diagnostic Trouble Code
Procedures
DTC
INSPECTION ITEM
DIAGNOSTIC CONTENT
REFERENCE PAGE
WHEEL SPEED SENSOR
WHEEL SPEED SENSOR
(REAR: RH)
(REAR: LH)
(FRONT: RH)
(FRONT: LH)
ABS-ECU
Wheel Speed Sensor Circuit
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-11
CAUTION
If there is any problem in the CAN bus lines, an
incorrect diagnostic trouble code may be set.
Diagnose the CAN bus lines before the DTC
(Refer to GROUP 54C, Trouble code diagno-
sis
.
CIRCUIT OPERATION
• A toothed wheel speed rotor generates a voltage
pulse as it moves across the pickup field of each
wheel speed sensor.
• The amount of voltage generated at each wheel
is determined by the clearance between the
wheel speed rotor teeth and the wheel speed
sensor, and by the speed of rotation.
• Sends alternating current signals at frequencies
which are proportional to the rotation speeds of
each wheel to the ABS electronic control unit
(ABS-ECU).
• The ABS hydraulic unit modulates the amount of
braking force individually applied to each wheel
cylinder.
.
ABS DTC SET CONDITIONS
The ABS-ECU monitors voltage fluctuation in each
wheel speed sensor circuit. If the ECU detects a
short or open circuit in the circuit, it will set a diag-
nostic trouble code.
.
AC305206
A-01 (B)
CONNECTOR: A-01
AT
AC304742
A-02 (GR)
CONNECTOR: A-02
HYDRAULIC UNIT
(WITH BUILT-IN ABS-ECU)
AC
AC305210AI
A-04(B)
CONNECTOR: A-04
AC305231BL
CONNECTOR: C-25
C-25
AC305260
F-04
F-07
CONNECTORS: F-04, F-07
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст