Mitsubishi Galant 9G. Manual — part 112
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-444
.
CIRCUIT OPERATION
• When the driver's door is opened with the ignition
switch at "ACC" position, the ETACS-ECU illumi-
nates the ignition key hole illumination light.
• The ignition key hole illumination light goes out in
30 seconds after the driver's door is closed. The
ignition key hole illumination light remains illumi-
nated for 30 seconds after the ignition key is
pulled out.
• The ETACS-ECU operates the ignition key hole
illumination light according to the input signals
from the following switches:
• Ignition switch (IG1): OFF
• Key reminder switch: OFF
• Interior light loaded signal: ON
• Vehicle condition:
• Ignition switch: "LOCK" (OFF) or "ACC" posi-
tion
• Ignition key: Removed from the ignition key
cylinder
• Driver’s door: Opened or closed
.
TECHNICAL DESCRIPTION (COMMENT)
If the ignition key hole illumination light does not illu-
minate, the input circuits from the switches described
in "CIRCUIT OPERATION", the key reminder switch
(ignition key hole illumination light bulb) or the
ETACS-ECU may be defective.
.
TROUBLESHOOTING HINTS
• Trouble in input signal system
• The wiring harness or connectors may have
loose, corroded, or damaged terminals, or termi-
nals pushed back in the connector
• The ETACS-ECU may be defective
DIAGNOSIS
Required Special Tools:
• MB991223: Harness Set
• MB991958: Scan Tool (MUT-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: MUT-III USB Cable
• MB991910: MUT-III Main Harness A
• MB991813: SWS Monitor Kit
• MB991806: SWS Monitor Cartridge
• MB991812: SWS Monitor Harness (For Column-ECU)
• MB991822: Probe Harness
AC305235
CONNECTOR: C-310
AD
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-445
STEP 1. Use scan tool MB991958 to select "ECU COMM
Check" on the SWS monitor display.
Check the ETACS-ECU.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958. Connect
special tool MB991910 before connecting special tool
MB991812. Be sure to connect special tool MB991806 after
turning on special tool MB991824.
(1) Connect the special tool. Refer to "How to connect SWS
."
(2) Turn the ignition switch to the "LOCK" (OFF) position.
(3) Operate scan tool MB991958 according to the procedure
below to display "ECU COMM Check."
a. Select "Interactive Diagnosis."
b. Select "System select."
c. Select "SWS."
d. Select "SWS MONITOR."
e. Select "ECU COMM Check."
(4) Scan tool MB991958 should show "OK" on the "ECU
COMM Check" menu for the "ETACS ECU" menu.
Q: Is "OK" displayed for the "ETACS ECU" menu?
YES : Go to Step 2.
NO : Refer to Inspection Procedure A-3 "Communication
with the ETACS-ECU is not possible
."
AC305411AB
MB991910
DATA LINK
CONNECTOR
MB991827
MB991824
MB991806
MB991812
AC302210
COLUMN SWITCH
CONNECTOR
COLUMN SWITCH
CONNECTOR AT
HARNESS SIDE
MB991812
AB
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-446
STEP 2. Check the input signal by using "DATA LIST"
menu of the SWS monitor.
Check the input signals from the following switches:
• Ignition switch: OFF
• Driver's door: open
• Front passenger's door: closed
(1) Operate scan tool MB991958 according to the procedure
below to display "ETACS ECU."
a. Select "Interactive Diagnosis."
b. Select "System select."
c. Select "SWS."
d. Select "SWS MONITOR."
e. Select "Data List."
f. Select "ETACS ECU."
(2) Check that normal conditions are displayed for the items
described in the table below.
Q: Does the scan tool MB991958 display the items "IG SW
(IG1)" and "FRONT DOOR SW" as normal condition?
Normal conditions are displayed for all the items : Go to
Step 3.
Normal condition is not displayed for "IG SW (IG1)" :
Refer to Inspection Procedure M-2 "ETACS-ECU
does not receive any signal from the ignition switch
(IG1)
Normal condition is not displayed for "FRONT DOOR
SW" : Refer to Inspection Procedure M-4 "ETACS-ECU
does not receive any signal from the front door
switches
."
ITEM NO.
ITEM NAME
NORMAL CONDITION
ITEM 30
IG SW(IG1)
OFF
ITEM 32
FRONT DOOR SW
ON
AC305411AB
MB991910
DATA LINK
CONNECTOR
MB991827
MB991824
MB991806
MB991812
AC302210
COLUMN SWITCH
CONNECTOR
COLUMN SWITCH
CONNECTOR AT
HARNESS SIDE
MB991812
AB
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-447
STEP 3. Check the input signal (by using the pulse check
mode of the monitor).
Check the following switches and input signals:
• Key reminder switch
• Interior light loaded signal
(1) Operate scan tool MB991958 according to the procedure
below to display "Pulse check."
a. Select "Interactive Diagnosis."
b. Select "System select."
c. Select "SWS."
d. Select "Pulse Checking."
(2) When the switches (see table below), which are applicable
for the input signal check, are operated, check if scan tool
MB991958 sounds or not.
Q: When the key reminder switch and the interior light are
operated, does scan tool MB991958 sound in each
case?
Buzzer of scan tool MB991958 sounds normally. : Go to
Step 4.
When the ignition key is removed and reinserted, scan
tool MB991958 does not sound : Refer to Inspection
Procedure N-1 "ETACS-ECU does not receive any
signal from the key reminder switch
When one of the interior lights is illuminated, scan tool
MB991958 does not sound : Refer to Inspection
Procedure N-9 "ETACS-ECU does not receive any
interior light loaded signal
STEP 4. Check ETACS-ECU connector C-218 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is ETACS-ECU connector C-218 in good condition?
YES : Go to Step 5.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. Verify that the ignition key hole illumination
light illuminates normally.
ITEM NAME
CONDITION
key reminder switch
Remove and reinsert the
ignition key
interior light loaded signal
Turn on one of the interior
lights
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AC305413AN
CONNECTOR: C-218
JUNCTION BLOCK
(REAR VIEW)
C-218 (GR)
HARNESS SIDE
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст