Mitsubishi Galant 9G. Manual — part 1398

52B-2

ON-VEHICLE SERVICE. . . . . . . . . . .

52B-354

ACCURACY CHECK OF OCCUPANT
CLASSIFICATION SENSOR . . . . . . . . . . .

52B-354

FRONT IMPACT SENSORS . . . . . . .

52B-362

REMOVAL AND INSTALLATION . . . . . . . .

52B-362

INSPECTION . . . . . . . . . . . . . . . . . . . . . . .

52B-364

SRS CONTROL UNIT (SRS-ECU). . .

52B-365

REMOVAL AND INSTALLATION . . . . . . . .

52B-365

INSPECTION . . . . . . . . . . . . . . . . . . . . . . .

52B-367

AIR BAG MODULES AND CLOCK
SPRING . . . . . . . . . . . . . . . . . . . . . . .

52B-368

REMOVAL AND INSTALLATION . . . . . . . .

52B-368

INSPECTION . . . . . . . . . . . . . . . . . . . . . . .

52B-374

SIDE IMPACT SENSOR . . . . . . . . . .

52B-377

REMOVAL AND INSTALLATION . . . . . . . .

52B-377

INSPECTION . . . . . . . . . . . . . . . . . . . . . . .

52B-379

SEAT BELTS WITH PRE-
TENSIONER . . . . . . . . . . . . . . . . . . . .

52B-380

REMOVAL AND INSTALLATION . . . . . . . .

52B-380

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

52B-383

SEAT SLIDE SENSOR . . . . . . . . . . . .

52B-384

REMOVAL AND INSTALLATION . . . . . . . .

52B-384

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

52B-386

OCCUPANT CLASSIFICATION
SENSOR . . . . . . . . . . . . . . . . . . . . . . .

52B-387

REMOVAL AND INSTALLATION . . . . . . . .

52B-387

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

52B-387

AIR BAG MODULE AND SEAT BELT
PRE-TENSIONER DISPOSAL
PROCEDURES . . . . . . . . . . . . . . . . . .

52B-387

SPECIFICATIONS . . . . . . . . . . . . . . .

52B-404

FASTENER TIGHTENING
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . .

52B-404

GENERAL DESCRIPTION

TSB Revision

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

52B-3

GENERAL DESCRIPTION

M1524000100730

NOTE: In this manual, the part names are changed
from the names in owner's manual into the following
names.

.

Driver’s seat position sensor

Seat slide sensor

Passenger’s seat weight sensor

Occupant

classification sensor

Seat belt buckle switch

Seat belt switch

Passenger air bag off indicator

Passenger air

bag OFF indicator light

Front passenger seat belt warning light

Pas-

senger seat belt warning light

.

WARNING

Improper service could result in serious
injury of the service personnel or the pas-
senger.

.

The SRS is designed to supplement the front seat
belts. It reduces injury to the driver(s) and the front
passenger(s) by deploying air bag(s) in case of a
head-on collision.
The SRS front air bags from an advanced air bag
system together with sensors at the vehicle and sen-
sors attached to front seats.

.

Side-airbag systems in the front seats are activated
when side impacts exceed a criteria to protect the
occupants’ upper bodies.

.

The seat belts with pre-tensioner work simulta-
neously with the SRS. The seat belt incorporating the
pre-tensioner automatically winds the seatbelt upon
front impact to reduce forward shifting of the driver’s
and passenger’s. The seat belt use status is used to
control the activation and deactivation of the pre-ten-
sioner.

.

The SRS consists of four air bag modules, SRS air
bag control unit (SRS-ECU), two front impact sen-
sors, two side impact sensors, SRS warning light,
passenger’s air bag OFF indicator light, passenger’s
seat belt warning light, clock spring, seat belt
pre-tensioner, seat belt switch, seat slide sensor,
occupant classification sensor and occupant classifi-
cation-ECU. Air bag modules are located in the cen-

ter of the steering wheel and above the glove box.
Side-airbags are located inside the front seatback
assemblies. Each air bag consists of a folded air bag
and an inflator unit. The SRS-ECU placed on the
forefront of the floor monitors the system and has a
front air bag safing G-sensor, front air bag analog
G-sensor and a side-airbag safing G-sensor. The
front impact sensor is assembled in the radiator sup-
port panel to monitor impact in case of front impact.
The side impact sensors inside the center pillars
monitor the shock incurred by the sides of the vehi-
cle. The SRS warning light on the combination meter
indicates the operational status of the SRS. The
clock spring is installed in the steering column. The
seat belt pre-tensioner is built into the driver's and
passenger's front seat belt retractor. The seat slide
sensor is installed at the seat adjuster section of the
driver seat in order to detect the driver seat slide
position. The occupant classification sensor is
installed underneath a rail of the passenger seat to
detect the load on the seat. The passenger’s air bag
OFF indicator light is installed to the lower left of the
multi-center display, and illuminates when the pas-
senger seat airbag is inactive. The passenger’s seat
belt warning light is installed to the lower right of the
multi-center display, and illuminates when the pas-
senger is not wearing the seatbelt. The seatbelt
switch detects whether the seatbelt is used.
Only authorized service personnel should do work on
or around the SRS components. Those service per-
sonnel should read this manual carefully before start-
ing any such work.

.

GENERAL DESCRIPTION

TSB Revision

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

52B-4

ON-BOARD DIAGNOSTIC/SRS WARNING LIGHT
FUNCTION

The diagnosis unit monitors the SRS system and stores data
concerning any detected faults in the system. When the ignition
switch is in "ON" or "START" position, the SRS warning light
should illuminate for about seven seconds and then turn "OFF."
That indicates that the SRS system is in operational order. If
the SRS warning light does any of the following, immediate
inspection by an authorized dealer is needed:
1. The SRS warning light does not illuminate as described

above.

2. The SRS warning light stays on for more than seven

seconds.

3. The SRS warning light illuminates while driving.
If a vehicle's SRS warning light is in any of these three condi-
tions, the SRS system must be inspected, diagnosed and ser-
viced in accordance with this manual.

AC307341

SRS WARNING LIGHT

AB

GENERAL DESCRIPTION

TSB Revision

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

52B-5

CONSTRUCTION DIAGRAM

NOTE: This construction diagram shows the general view of the SRS components. For details, refer to
"Schematic(

P.52B-9

), "Configuration Diagrams(

P.52B-12

), " and "Circuit Diagram(

P.52B-14

)".

AC307333

AC306795

AC306796

AC205757

AC304745

AC306329

SRS WARNING LIGHT

VEHICLES
IDENTIFICATION
CODE CHART
PLATE

SIDE IMPACT
SENSOR

SIDE-AIRBAG
MODULE

SIDE-AIRBAG
MODULE

SIDE IMPACT
SENSOR

FRONT IMPACT
SENSOR

PASSENGER'S (FRONT)
AIR BAG MODULE

SRS-ECU

CLOCK
SPRING

DATA LINK CONNECTOR
(FOR SCAN TOOL)

SEAT BELT WITH
PRE-TENSIONER

DRIVER'S AIR
BAG MODULE

AB

PASSENGER'S SEAT BELT WARNING LIGHT

PASSENGER'S
AIR BAG OFF INDICATOR LIGHT

SEAT BELT WITH
PRE-TENSIONER

SEAT SLIDE
SENSOR

SEAT BELT
SWITCH

OCCUPANT
CLASSIFICATION
SENSOR

SRS-ECU

OCCUPANT
CLASSIFICATION-ECU

Была ли эта страница вам полезна?
Да!Нет
5 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности