Mitsubishi L200. Manual — part 571
OUTSIDE MIRROR
EXTERIOR
51-100
STEP 3. Connector check: E-02 door mirror
assembly (RH) connector.
AC509954AE
Harness side
Connector: E-02 (RH)
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the defective connector.
STEP 4. Resistance measurement at the E-02
door mirror assembly (RH) connector.
AC509954AE
Harness side
Connector: E-02 (RH)
(1) Disconnect the connector, and measure at the
wiring harness side.
AC310506
Connector E-02
HS
(Harness side)
(2) Resistance between E-02 door mirror assembly
connector terminal No.2 and body earth.
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Go to Step 5.
STEP 5. Check the wiring harness between E-02
door mirror assembly (RH) connector terminal
No.2 and body earth.
AC509954AE
Harness side
Connector: E-02 (RH)
NOTE:
AC903853
Connector: C-122 <LHD>
AG
AC903868
AG
Connector: C-122 <RHD>
Harness side
Prior to the wiring harness inspection, check interme-
diate connector C-122, and repair if necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/Inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
OUTSIDE MIRROR
EXTERIOR
51-101
STEP 6. Voltage measurement at the E-02 door
mirror assembly (RH) connector.
AC509954AE
Harness side
Connector: E-02 (RH)
(1) Turn the ignition switch to the ON position.
(2) Rear window defogger switch: ON
(3) Disconnect the connector, and measure at the
wiring harness side.
AC310507 IW
Connector E-02
(Harness side)
(4) Voltage between E-02 door mirror assembly
connector terminal No.1 and body earth.
OK: System voltage
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/Inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Go to Step 7.
OUTSIDE MIRROR
EXTERIOR
51-102
STEP 7. Check the wiring harness between E-02
door mirror assembly (RH) connector terminal
No.1 and C-208 junction block connector
terminal No.10.
AC509954AE
Harness side
Connector: E-02 (RH)
AC509934
Connector: C-208 <LHD>
Junction block (Front view)
DA
Harness side
AC509936
Connector: C-208 <RHD>
Harness side
CD
Junction block
(Front view)
NOTE:
AC903868
Connectors: C-08, C-121 <RHD>
C-08 (B)
CF
C-121
C-08
C-121
AC903853
Connector: C-121 <LHD>
AI
Prior to the wiring harness inspection, check joint
connector C-08 <RH drive vehicles>, intermediate
connector C-121, and repair if necessary.
• Check the power supply line for open circuit.
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the wiring harness.
STEP 8. Retest the system.
Check that the heater element of the door mirror
(RH) functions normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/Inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Replace the door mirror assembly (RH).
STEP 9. Check the heater element of the door
mirror (LH)
Check the heater element of the door mirror (LH)
(Refer to
).
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Replace the mirror glass of the door mirror
assembly (LH).
OUTSIDE MIRROR
EXTERIOR
51-103
STEP 10. Connector check: E-17 door mirror
assembly (LH) connector.
AC509952
Connector: E-17 (LH)
AE
Harness side
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
STEP 11. Resistance measurement at the E-17
door mirror assembly (LH) connector.
AC509952
Connector: E-17 (LH)
AE
Harness side
(1) Disconnect the connector, and measure at the
wiring harness side.
AC310506HT
(Harness side)
Connector E-17
(2) Resistance between E-17 door mirror assembly
connector terminal No.2 and body earth.
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Go to Step 12.
STEP 12. Check the wiring harness between E-17
door mirror assembly (LH) connector terminal
No.2 and body earth.
AC509952
Connector: E-17 (LH)
AE
Harness side
NOTE:
AC903856AG
Connector: C-134 <LHD>
Harness side
AC903865
Connector: C-134 <RHD>
AF
Prior to the wiring harness inspection, check interme-
diate connector C-134 and repair if necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/Inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст