Mitsubishi L200. Manual — part 739
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-323
STEP 11. Check the wiring harness between C-
170 multivision display connector terminal No.17
and fusible link (20).
• Check the power supply lines (battery supply) for
open circuit and short circuit.
NOTE:
Prior to the wiring harness inspection, check junction
block connectors C-213, C-209 and joint connector
C-132, and repair if necessary.
Q: Is the check result normal?
YES :
Troubleshoot the ignition switch. Refer to
.
NO :
Repair the wiring harness.
AC903853
Connectors: C-132, C-170 <LHD>
AY
C-132 (GR)
C-132
C-170 (GR)
Harness side
C-170
AC903868
BF
Connector: C-170 <RHD>
C-170 (GR)
Harness side
AC903865
Connector: C-132 <RHD>
AB
C-132 (GR)
AC509934
Connectors: C-209, C-213 <LHD>
Junction block (Front view)
C-213
C-209
C-213
C-209
AC
Harness side
Harness side
AC509936
Connectors: C-209, C-213 <RHD>
C-213
C-209
AC
Junction block
(Front view)
C-213
C-209
Harness side Harness side
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-324
STEP 12. Voltage measurement at C-169
multivision display connector.
(1) Disconnect C-169 multivision display connector,
and measure at the wiring harness-side
connector.
(2) Voltage between C-169 multivision display
terminal No.21 and the body earth
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Go to Step 13.
AC903853
C-169 (GR)
Harness side
AW
Connector: C-169 <LHD>
AC903868
C-169 (GR)
Harness side
BH
Connector: C-169 <RHD>
AC310507 LX
Connector C-169
(Harness side)
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-325
STEP 13. Check the wiring harness between C-
169 multivision display connector terminal No.21
and fusible link (20).
NOTE:
Prior to the wiring harness inspection, check junction
block connectors C-213, C-209 and joint connector
C-132, and repair if necessary.
• Check the power supply lines (battery supply) for
open circuit and short circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points, How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
STEP 14. Retest the system
Check if the multivision display power is turned ON.
Q: Is the check result normal?
AC903853
Connectors: C-132, C-169 <LHD>
AZ
C-132 (GR)
C-169 (GR)
Harness side
C-132
C-169
AC903868
C-169 (GR)
Harness side
BH
Connector: C-169 <RHD>
AC903865
Connector: C-132 <RHD>
AB
C-132 (GR)
AC509934
Connectors: C-209, C-213 <LHD>
Junction block (Front view)
C-213
C-209
C-213
C-209
AC
Harness side
Harness side
AC509936
Connectors: C-209, C-213 <RHD>
C-213
C-209
AC
Junction block
(Front view)
C-213
C-209
Harness side Harness side
MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
CHASSIS ELECTRICAL
54A-326
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Replace the multivision display.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст