Mitsubishi L200. Manual — part 557
WINDSHIELD WIPER AND WASHER
EXTERIOR
51-44
STEP 7. Check the wiring harness between C-218
ETACS-ECU connector terminal No.8 and A-05
windshield wiper motor connector terminal No.3.
AC509934
Connector: C-218 <LHD>
AJ
Junction
block
Junction block side
AC509943
Connector: C-218 <RHD>
AC
Junction block
(Rear view)
Junction block side
AC903897
AJ
Connector: A-05 <LHD>
Harness side
A-05 (GR)
AC903889
AC
Connector: A-05 <RHD>
Harness side
A-05 (GR)
NOTE:
AC509934
Connector: C-210 <LHD>
Junction block
AN
Harness side
AC509936
Connector: C-210 <RHD>
Harness side
AJ
Junction block
(Front view)
Prior to the wiring harness inspection, check the
junction block connector C-210 and repair if neces-
sary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
WINDSHIELD WIPER AND WASHER
EXTERIOR
51-45
STEP 8. Check the wiring harness between C-218
ETACS-ECU connector terminal No.8 and A-05
windshield wiper motor connector terminal No.1.
AC509934
Connector: C-218 <LHD>
AJ
Junction
block
Junction block side
AC509943
Connector: C-218 <RHD>
AC
Junction block
(Rear view)
Junction block side
AC903897
AJ
Connector: A-05 <LHD>
Harness side
A-05 (GR)
AC903889
AC
Connector: A-05 <RHD>
Harness side
A-05 (GR)
NOTE:
AC509934
Connector: C-210 <LHD>
Junction block
AN
Harness side
AC509936
Connector: C-210 <RHD>
Harness side
AJ
Junction block
(Front view)
Prior to the wiring harness inspection, check the
junction block connector C-210 and repair if neces-
sary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
STEP 9. Retest the system.
Check that the windshield wipers work normally by
moving the switch to each position.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Replace the windshield wiper motor.
WINDSHIELD WIPER AND WASHER
EXTERIOR
51-46
STEP 10. Connector check: C-218 ETACS-ECU
connector
AC509934
Connector: C-218 <LHD>
AJ
Junction
block
Junction block side
AC509943
Connector: C-218 <RHD>
AC
Junction block
(Rear view)
Junction block side
Q: Is the check result normal?
YES <LH drive vehicles> :
Go to Step 11.
YES <RH drive vehicles> :
Go to Step 12.
NO :
Repair the defective connector.
STEP 11. Check the wiring harness between C-
218 ETACS-ECU connector terminal No.7 and A-
05 windshield wiper motor connector terminal
No.5.
AC509934
Connector: C-218 <LHD>
AJ
Junction
block
Junction block side
AC903897
AJ
Connector: A-05 <LHD>
Harness side
A-05 (GR)
NOTE:
AC509934
Connector: C-210 <LHD>
Junction block
AN
Harness side
Prior to the wiring harness inspection, check the
junction block connector C-210 and repair if neces-
sary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the wiring harness.
WINDSHIELD WIPER AND WASHER
EXTERIOR
51-47
STEP 12. Check the wiring harness between C-
218 ETACS-ECU connector terminal No.7 and A-
05 windshield wiper motor connector terminal
No.4.
AC509943
Connector: C-218 <RHD>
AC
Junction block
(Rear view)
Junction block side
AC903889
AC
Connector: A-05 <RHD>
Harness side
A-05 (GR)
NOTE:
AC509936
Connector: C-210 <RHD>
Harness side
AJ
Junction block
(Front view)
Prior to the wiring harness inspection, check the
junction block connector C-210 and repair if neces-
sary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the wiring harness.
STEP 13. Retest the system.
Check that the windshield wipers work normally by
moving the switch to each position.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Replace the windshield wiper motor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст