Mitsubishi L200. Manual — part 285
AC510056AD
Harness side
B-10 (B)
Connector: B-10
AC510056AG
B-14 (B)
Connector: B-14
Harness side
AC510057
Harness side
A/T-ECU
C-20
AC
Connector: C-20
A/T-ECU
<RHD>
<LHD>
AC509613AG
Connector: C-52 <LHD>
C-52
Harness side
AC509934
Connectors: C-207, C-208 <LHD>
Junction block (Front view)
C-208
CX
Harness side
C-207
AC509936
Connectors: C-207, C-208 <RHD>
Harness side
C-208
C-207
BZ
Junction block
(Front view)
TROUBLESHOOTING
AUTOMATIC TRANSMISSION
23A-47
OPERATION
The inhibitor switch detects the selector lever posi-
tion (P, R, N,D, 2 or L) which the driver has selected,
and sends the information to the A/T-ECU.
DIAGNOSIS CODE SET CONDITIONS
If the inhibitor switch has not been sending any sig-
nal for at least 30 seconds, an open circuit may be
present and diagnosis code No.P1770 (P0705) is
set.
PROBABLE CAUSES
• Malfunction of the inhibitor switch
• Damaged harness wires and connectors
• Malfunction of the A/T-ECU
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III data list
Item 34: Inhibitor switch
(Refer to data list
reference table).
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
Malfunction ).
NO <none of the selector lever positions are
displayed on M.U.T.-III> :
Go to Step 2.
NO <only one of the selector lever positions is not
displayed on M.U.T.-III> :
Go to Step 6.
TROUBLESHOOTING
AUTOMATIC TRANSMISSION
23A-48
STEP 2. Check the inhibitor switch.
Refer to
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the inhibitor switch.
STEP 3. Connector check: B-14 Inhibitor switch
connector, C-208 J/B connector, B-10 and C-52
intermediate connector
Check for the contact with terminals.
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the defective connector.
STEP 4. Check the harness between inhibitor
switch connector B-14 terminal No.7 and J/B
connector C-208 terminal No.2.
Check the power supply line for open circuit.
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the wiring harness.
STEP 5. M.U.T.-III data list
Item 34: Inhibitor switch
(Refer to data list
reference table).
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
Malfunction ).
NO :
Replace the A/T-ECU.
STEP 6. Check the inhibitor switch.
Refer to
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Replace the inhibitor switch.
STEP 7. Connector check: B-14 inhibitor switch
connector, C-20 A/T-ECU connector, B-10
intermediate connector.
Check for the contact with terminals.
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
STEP 8. Check the harness between inhibitor
switch connector B-14 terminal No.1, 8, 2, 3, 4, 5
and A/T-ECU connector C-20 terminal No.55, 66,
56, 67, 68, 58.
Check the output line for open circuit.
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the wiring harness.
TROUBLESHOOTING
AUTOMATIC TRANSMISSION
23A-49
Code No.P1770 (P0705): Inhibitor switch system <5A/T>
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
AC903907
INHIBITOR
SWITCH
IGNITION
SWITCH (IG1)
Inhibitor switch system circuit
A/T-ECU
<LHD>
<RHD>
AC510056AD
Harness side
B-10 (B)
Connector: B-10
AC510056AG
B-14 (B)
Connector: B-14
Harness side
AC510057
Harness side
A/T-ECU
C-20
AC
Connector: C-20
A/T-ECU
<RHD>
<LHD>
AC509930AG
Connector: C-34 <RHD>
C-34
Harness side
AC509613AG
Connector: C-52 <LHD>
C-52
Harness side
AC509934
Connectors: C-207, C-208 <LHD>
Junction block (Front view)
C-208
CX
Harness side
C-207
AC509936
Connectors: C-207, C-208 <RHD>
Harness side
C-208
C-207
BZ
Junction block
(Front view)
TROUBLESHOOTING
AUTOMATIC TRANSMISSION
23A-50
OPERATION
The inhibitor switch detects the selector lever posi-
tion (P, R, N, D) which the driver has selected, and
sends the information to the ECU.
DIAGNOSIS CODE SET CONDITIONS
If the inhibitor switch has not been sending any sig-
nal for at least 30 seconds, an open circuit may be
present and diagnosis code No.P1770 (P0705) is
set.
PROBABLE CAUSES
• Malfunction of the inhibitor switch
• Damaged harness wires and connectors
• Malfunction of the A/T-ECU
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III data list
Item 34: Inhibitor switch (Refer to Data List Refer-
ence Table
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
Malfunction ).
NO none of the selector lever positions are
displayed on M.U.T.-III :
Go to Step 2.
NO only one of the selector lever positions is not
displayed on M.U.T.-III :
Go to Step 6.
STEP 2. Check the inhibitor switch.
Refer to
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the inhibitor switch.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст